Iwata

Precision Brand

RS Pro

Mechanical Parts

mechanical-parts

Ball Bearings

ball-bearings

Fasteners

fasteners

Fastener Assortments

fastener-assortments

O Ring

o-ring

Washers

washers

Shim Ring, Inner Diameter 20mm X Outer Diameter 30mm, Pack of 10 (Available in Brass, Carbon Steel and 304 Stainless Steel)

Shim Rings, also known as Shim Washers, are available in various thickness to align gaps and uneven surfaces. Shim washers look similar to flat washers, but are different in their usage and purpose.

Produced in Japan, these are made to extremely precise tolerances and are free from burrs. We are able to offer shim washers in different materials such as Brass, Carbon Steel (SPCC) and 304 stainless steel.

Use them for screws, axles, bearing faces and machine bases. Depending on the material, thickness variants range from 0.01mm to 1mm. Each package contains 10 pcs of the same thickness in the above given inner diameter and outer diameter sizes.

Shim washers and flat washers are inherently different in their purpose and tolerances. Here are three differences that set shim washers apart from flat washers.

They serve a different purpose in life. While flat washers are used for fastening, load distribution and surface protection, shim washers are used for gap alignment. Flat washers are usually used together with screws, bolts or nuts. While shim washers can be used in the same way, they can be slotted into threaded screws or axles to carry out their job.

Based on DIN125A standard, flat washers are produced with nominal dimensions with no tolerance values given. Our flat washers are supplied with the understanding that the thickness variance will range from 0 to 0.2mm. For example, an M3 flat washer will have thickness ranging from 0.4mm to 0.6mm, even in the same batch!

Shim washers are produced to close tolerances, usually up to 0.2mm for ID and OD, and as small as +/-0.02mm for thickness. 

In short, shim washers are more precise than flat washers because they have to be. During gap alignment or leveling, minor differences in thickness and diameters must be taken into account for fear of misalignment. 

Flat washers usually have a single thickness based on a given ID and OD. For example, an M3 flat washer with ID 3.2mm and OD 6mm will have thickness 0.4mm. If you are lucky (or not), you might find some with 0.5mm in the same batch. Not reassuring? Not to worry, being used for fastening, the thickness of flat washers is usually not a focal point.

Product Description: Shim Ring (Also known as Shim Washer)

Manufacturer: Iwata Manufacturing Co., Ltd

Materials: Carbon Steel (SPCC), Brass and 304 Stainless Steel

<h3 class="md-block-header-three"><strong class="md-inline-bold">Shim Ring, Inner Diameter 20mm X Outer Diameter 30mm, Pack of 10 (Available in Brass, Carbon Steel and 304 Stainless Steel)</strong></h3><p class="md-block-unstyled"><strong class="md-inline-bold">Shim Rings, also known as Shim Washers, are available in various thickness to align gaps and uneven surfaces. Shim washers look similar to flat washers, but are different in their usage and purpose.</strong></p><p class="md-block-unstyled"><strong class="md-inline-bold">Produced in Japan, these are made to extremely precise tolerances and are free from burrs. We are able to offer shim washers in different materials such as Brass, Carbon Steel (SPCC) and 304 stainless steel.</strong></p><p class="md-block-unstyled"><strong class="md-inline-bold">Use them for screws, axles, bearing faces and machine bases. Depending on the material, thickness variants range from 0.01mm to 1mm. Each package contains 10 pcs of the same thickness in the above given inner diameter and outer diameter sizes.</strong></p><p class="md-block-unstyled">Shim washers and flat washers are inherently different in their purpose and tolerances. Here are three differences that set shim washers apart from flat washers.</p><p class="md-block-unstyled">Purpose And Usage</p><p class="md-block-unstyled">They serve a different purpose in life. While flat washers are used for fastening, load distribution and surface protection, shim washers are used for gap alignment. Flat washers are usually used together with screws, bolts or nuts. While shim washers can be used in the same way, they can be slotted into threaded screws or axles to carry out their job.</p><p class="md-block-unstyled">Tolerances</p><p class="md-block-unstyled">Based on DIN125A standard, flat washers are produced with nominal dimensions with no tolerance values given. Our flat washers are supplied with the understanding that the thickness variance will range from 0 to 0.2mm. For example, an M3 flat washer will have thickness ranging from 0.4mm to 0.6mm, even in the same batch!</p><p class="md-block-unstyled">Shim washers are produced to close tolerances, usually up to 0.2mm for ID and OD, and as small as +/-0.02mm for thickness. </p><p class="md-block-unstyled">In short, shim washers are more precise than flat washers because they have to be. During gap alignment or leveling, minor differences in thickness and diameters must be taken into account for fear of misalignment. </p><p class="md-block-unstyled">Available Thickness</p><p class="md-block-unstyled">Flat washers usually have a single thickness based on a given ID and OD. For example, an M3 flat washer with ID 3.2mm and OD 6mm will have thickness 0.4mm. If you are lucky (or not), you might find some with 0.5mm in the same batch. Not reassuring? Not to worry, being used for fastening, the thickness of flat washers is usually not a focal point.</p><p class="md-block-unstyled">Product Description: Shim Ring (Also known as Shim Washer)</p><p class="md-block-unstyled">Manufacturer: Iwata Manufacturing Co., Ltd</p><p class="md-block-unstyled">Materials: Carbon Steel (SPCC), Brass and 304 Stainless Steel</p><p class="md-block-unstyled">ID: 20mm</p><p class="md-block-unstyled">OD: 30mm</p><p class="md-block-unstyled">Thickness: 0.01mm to 1mm.</p><p class="md-block-unstyled">Quantity Per Package: 10 pcs</p><p class="md-block-unstyled">Country of Origin: Japan</p>

<h3><strong>Shim Ring, Inner Diameter 20mm X Outer Diameter 30mm, Pack of 10 (Available in Brass, Carbon Steel and 304 Stainless Steel)</strong></h3>
<p><strong>Shim Rings, also known as Shim Washers, are available in various thickness to align gaps and uneven surfaces. Shim washers look similar to flat washers, but are different in their usage and purpose.</strong></p>
<p><strong>Produced in Japan, these are made to extremely precise tolerances and are free from burrs. We are able to offer shim washers in different materials such as Brass, Carbon Steel (SPCC) and 304 stainless steel.</strong></p>
<p><strong>Use them for screws, axles, bearing faces and machine bases. Depending on the material, thickness variants range from 0.01mm to 1mm. Each package contains 10 pcs of the same thickness in the above given inner diameter and outer diameter sizes.</strong></p>
<p>Shim washers and flat washers are inherently different in their purpose and tolerances. Here are three differences that set shim washers apart from flat washers.</p>
<p>Purpose And Usage</p>
<p>They serve a different purpose in life. While flat washers are used for fastening, load distribution and surface protection, shim washers are used for gap alignment. Flat washers are usually used together with screws, bolts or nuts. While shim washers can be used in the same way, they can be slotted into threaded screws or axles to carry out their job.</p>
<p>Tolerances</p>
<p>Based on DIN125A standard, flat washers are produced with nominal dimensions with no tolerance values given. Our flat washers are supplied with the understanding that the thickness variance will range from 0 to 0.2mm. For example, an M3 flat washer will have thickness ranging from 0.4mm to 0.6mm, even in the same batch!</p>
<p>Shim washers are produced to close tolerances, usually up to 0.2mm for ID and OD, and as small as +/-0.02mm for thickness. </p>
<p>In short, shim washers are more precise than flat washers because they have to be. During gap alignment or leveling, minor differences in thickness and diameters must be taken into account for fear of misalignment. </p>
<p>Available Thickness</p>
<p>Flat washers usually have a single thickness based on a given ID and OD. For example, an M3 flat washer with ID 3.2mm and OD 6mm will have thickness 0.4mm. If you are lucky (or not), you might find some with 0.5mm in the same batch. Not reassuring? Not to worry, being used for fastening, the thickness of flat washers is usually not a focal point.</p>
<p>Product Description: Shim Ring (Also known as Shim Washer)</p>
<p>Manufacturer: Iwata Manufacturing Co., Ltd</p>
<p>Materials: Carbon Steel (SPCC), Brass and 304 Stainless Steel</p>
<p>ID: 20mm</p>
<p>OD: 30mm</p>
<p>Thickness: 0.01mm to 1mm.</p>
<p>Quantity Per Package: 10 pcs</p>
<p>Country of Origin: Japan</p>


Ergomat

Southco

Others

DYMON

SCRUBS

IT Accessories

Machinery Accessories

Screw

Painting Tools

Hooks & Eyes

Drill Bits & Drill Bit Sets

Rubber Seals

Other Tools

Hose Clamp

Leland

buyerIntroduction

Iwata Shim Ring, Inner Diameter 20mm X Outer Diameter 30mm, Pack of 10

iwata shim ring, inner diameter 20mm outer 30mm, pack 10 cincin iwata, dalam luar kemasan buah washers pek iwata/岩田 垫片环，内径 20 毫米 外径 30 毫米，10 个一包 岩田

iwata-shim-ring-inner-diameter-20mm-x-outer-diameter-30mm-pack-of-10

Carbon Steel ID 20mm x OD 30mm x 0.10mm PN RF020030010, Pack of 10 Pieces

Carbon Steel ID 20mm x OD 30mm x 0.15mm PN RF020030015, Pack of 10 Pieces

Carbon Steel ID 20mm x OD 30mm x 0.20mm PN RF020030020, Pack of 10 Pieces

Carbon Steel ID 20mm x OD 30mm x 0.30mm PN RF020030030, Pack of 10 Pieces

Carbon Steel ID 20mm x OD 30mm x 0.50mm PN RF020030050, Pack of 10 Pieces

Carbon Steel ID 20mm x OD 30mm x 1mm PN RF020030100, Pack of 10 Pieces

Brass ID 20mm x OD 30mm x 0.05mm PN RB020030005, Pack of 10 Pieces

Brass ID 20mm x OD 30mm x 0.10mm PN RB020030010, Pack of 10 Pieces

Brass ID 20mm x OD 30mm x 0.15mm PN RB020030015, Pack of 10 Pieces

Brass ID 20mm x OD 30mm x 0.20mm PN RB020030020, Pack of 10 Pieces

Brass ID 20mm x OD 30mm x 0.30mm PN RB020030030, Pack of 10 Pieces

Brass ID 20mm x OD 30mm x 0.50mm PN RB0020030050, Pack of 10 Pieces

Brass ID 20mm x OD 30mm x 1mm PN RB020030100, Pack of 10 Pieces

304 SST ID 20mm x OD 30mm x 0.01mm PN RS020030001, Pack of 10 Pieces

304 SST ID 20mm x OD 30mm x 0.02mm PN RS020030002, Pack of 10 Pieces

304 SST ID 20mm x OD 30mm x 0.03mm PN RS020030003, Pack of 10 Pieces

304 SST ID 20mm x OD 30mm x 0.05mm PN RS020030005, Pack of 10 Pieces

304 SST ID 20mm x OD 30mm x 0.10mm PN RS020030010, Pack of 10 Pieces

304 SST ID 20mm x OD 30mm x 0.15mm PN RS020030015, Pack of 10 Pieces

304 SST ID 20mm x OD 30mm x 0.20mm PN RS020030020, Pack of 10 Pieces

304 SST ID 20mm x OD 30mm x 0.30mm PN RS020030030, Pack of 10 Pieces

304 SST ID 20mm x OD 30mm x 0.50mm PN RS020030050, Pack of 10 Pieces

304 SST ID 20mm x OD 30mm x 1mm PN RS020030100, Pack of 10 Pieces

Material

RS PRO Datasheet

RS PRO O-Rings Overview

PHOENIX CONTACT

Mag-Lite

Facom

Wago

Kimberly Clark

HEICO

Plugs & Connector 

Panel Mount Indicators 

Clamps

Indicator Lights

Ethernet Cable

Bolts

Electrical Wire 

Fuses & Fusegear

RS Components ETH SG

Rs Pro 2556450 Fkm O-Ring, 20mm Bore, 30mm Outer Diameter (1 Bag of 2)

rs pro 2556450 fkm o-ring, 20mm bore, 30mm outer diameter (1 bag 2) lubang 20mm, luar kantong berisi ring o-ring bore beg gelang 型圈，20mm 内径，30mm 外径（1 个） o型圈 rs专业版

rs-pro-2556450-fkm-o-ring-20mm-bore-30mm-outer-diameter-1-bag-of-2

Standard set collar attached with set screw

The inner ring of bearing can be held down by 30° chamfer

Hex Socket Set Screws (Recessed SUSXM7) - 2 Piece

<h3 class="md-block-header-three">Features:</h3><ul class="md-block-unordered-list-item"><li>Standard set collar attached with set screw</li><li>The inner ring of bearing can be held down by 30° chamfer</li><li>Can be used to fix sprockets and gears</li><li>Material is stainless steel</li></ul><h3 class="md-block-header-three">Specification:</h3><ul class="md-block-unordered-list-item"><li>Brand: Iwata</li><li>Product Type: Basic Shaft Collar</li><li>Material: Stainless Steel SUS304</li><li>Inner Diameter (φB): 30 mm</li><li>Width (L): 20 mm</li><li>Outer Diameter (φD): 49 mm</li><li>Chamfer Diameter (φD1): 42 mm</li><li>Tightening Screw (M): M8x8</li></ul><h3 class="md-block-header-three">Accessories:</h3><ul class="md-block-unordered-list-item"><li>Hex Socket Set Screws (Recessed SUSXM7) - 2 Piece</li></ul>

<h3>Features:</h3>
<ul>
<li>Standard set collar attached with set screw</li>
<li>The inner ring of bearing can be held down by 30° chamfer</li>
<li>Can be used to fix sprockets and gears</li>
<li>Material is stainless steel</li>
</ul>
<h3>Specification:</h3>
<ul>
<li>Brand: Iwata</li>
<li>Product Type: Basic Shaft Collar</li>
<li>Material: Stainless Steel SUS304</li>
<li>Inner Diameter (φB): 30 mm</li>
<li>Width (L): 20 mm</li>
<li>Outer Diameter (φD): 49 mm</li>
<li>Chamfer Diameter (φD1): 42 mm</li>
<li>Tightening Screw (M): M8x8</li>
</ul>
<h3>Accessories:</h3>
<ul>
<li>Hex Socket Set Screws (Recessed SUSXM7) - 2 Piece</li>
</ul>


Leland Tan

Iwata Stainless Steel Basic Shaft Collar 30mm X 20mm SC3020S

iwata stainless steel basic shaft collar 30mm x 20mm sc3020s ball bearings bearing kerah bebola iwata/岩田 县不锈钢基础轴环30mm 球轴承 岩田

iwata-stainless-steel-basic-shaft-collar-30mm-x-20mm-sc3020s

Surface Treatment: Electroless Nickel Plating

<h3 class="md-block-header-three">Features:</h3><ul class="md-block-unordered-list-item"><li>Standard set collar attached with set screw</li><li>The inner ring of bearing can be held down by 30° chamfer</li><li>Can be used to fix sprockets and gears</li><li>Material is iron</li></ul><h3 class="md-block-header-three">Specification:</h3><ul class="md-block-unordered-list-item"><li>Brand: Iwata</li><li>Product Type: Basic Shaft Collar</li><li>Material: Iron S45C</li><li>Surface Treatment: Electroless Nickel Plating</li><li>Inner Diameter (φB): 30 mm</li><li>Width (L): 20 mm</li><li>Outer Diameter (φD): 49 mm</li><li>Chamfer Diameter (φD1): 42 mm</li><li>Tightening Screw (M): M8x8</li></ul><h3 class="md-block-header-three">Accessories:</h3><ul class="md-block-unordered-list-item"><li>Hex Socket Set Screws (Recessed SUSXM7) - 2 Piece</li></ul>

<h3>Features:</h3>
<ul>
<li>Standard set collar attached with set screw</li>
<li>The inner ring of bearing can be held down by 30° chamfer</li>
<li>Can be used to fix sprockets and gears</li>
<li>Material is iron</li>
</ul>
<h3>Specification:</h3>
<ul>
<li>Brand: Iwata</li>
<li>Product Type: Basic Shaft Collar</li>
<li>Material: Iron S45C</li>
<li>Surface Treatment: Electroless Nickel Plating</li>
<li>Inner Diameter (φB): 30 mm</li>
<li>Width (L): 20 mm</li>
<li>Outer Diameter (φD): 49 mm</li>
<li>Chamfer Diameter (φD1): 42 mm</li>
<li>Tightening Screw (M): M8x8</li>
</ul>
<h3>Accessories:</h3>
<ul>
<li>Hex Socket Set Screws (Recessed SUSXM7) - 2 Piece</li>
</ul>


Iwata Iron Electroless Nickel Plating Basic Shaft Collar 30mm X 20mm SC3020M

iwata iron electroless nickel plating basic shaft collar 30mm x 20mm sc3020m nikel ball bearings bearing bebola iwata/岩田 县铁化学镀镍基础轴环30mm 球轴承 岩田

iwata-iron-electroless-nickel-plating-basic-shaft-collar-30mm-x-20mm-sc3020m

<h3 class="md-block-header-three">Features:</h3><ul class="md-block-unordered-list-item"><li>Standard set collar attached with set screw</li><li>The inner ring of bearing can be held down by 30° chamfer</li><li>Can be used to fix sprockets and gears</li><li>Material is iron</li></ul><h3 class="md-block-header-three">Specification:</h3><ul class="md-block-unordered-list-item"><li>Brand: Iwata</li><li>Product Type: Basic Shaft Collar</li><li>Material: Iron S45C</li><li>Surface Treatment: Nickel Chrome Plating</li><li>Inner Diameter (φB): 30 mm</li><li>Width (L): 20 mm</li><li>Outer Diameter (φD): 49 mm</li><li>Chamfer Diameter (φD1): 42 mm</li><li>Tightening Screw (M): M8x8</li></ul><h3 class="md-block-header-three">Accessories:</h3><ul class="md-block-unordered-list-item"><li>Hex Socket Set Screws (Recessed SUSXM7) - 2 Piece</li></ul>

<h3>Features:</h3>
<ul>
<li>Standard set collar attached with set screw</li>
<li>The inner ring of bearing can be held down by 30° chamfer</li>
<li>Can be used to fix sprockets and gears</li>
<li>Material is iron</li>
</ul>
<h3>Specification:</h3>
<ul>
<li>Brand: Iwata</li>
<li>Product Type: Basic Shaft Collar</li>
<li>Material: Iron S45C</li>
<li>Surface Treatment: Nickel Chrome Plating</li>
<li>Inner Diameter (φB): 30 mm</li>
<li>Width (L): 20 mm</li>
<li>Outer Diameter (φD): 49 mm</li>
<li>Chamfer Diameter (φD1): 42 mm</li>
<li>Tightening Screw (M): M8x8</li>
</ul>
<h3>Accessories:</h3>
<ul>
<li>Hex Socket Set Screws (Recessed SUSXM7) - 2 Piece</li>
</ul>


Iwata Iron Nickel Chrome Plating Basic Shaft Collar 30mm X 20mm SC3020N

iwata iron nickel chrome plating basic shaft collar 30mm x 20mm sc3020n besi nikel ball bearings bearing bebola iwata/岩田 县铁镍铬电镀基础轴环30mm 球轴承 岩田

iwata-iron-nickel-chrome-plating-basic-shaft-collar-30mm-x-20mm-sc3020n

Shim Ring, Inner Diameter 30mm X Outer Diameter 45mm, Pack of 10 (Available in Brass, Carbon Steel and 304 Stainless Steel)

<h3 class="md-block-header-three"><strong class="md-inline-bold">Shim Ring, Inner Diameter 30mm X Outer Diameter 45mm, Pack of 10 (Available in Brass, Carbon Steel and 304 Stainless Steel)</strong></h3><p class="md-block-unstyled"><strong class="md-inline-bold">Shim Rings, also known as Shim Washers, are available in various thickness to align gaps and uneven surfaces. Shim washers look similar to flat washers, but are different in their usage and purpose.</strong></p><p class="md-block-unstyled"><strong class="md-inline-bold">Produced in Japan, these are made to extremely precise tolerances and are free from burrs. We are able to offer shim washers in different materials such as Brass, Carbon Steel (SPCC) and 304 stainless steel.</strong></p><p class="md-block-unstyled"><strong class="md-inline-bold">Use them for screws, axles, bearing faces and machine bases. Depending on the material, thickness variants range from 0.01mm to 1mm. Each package contains 10 pcs of the same thickness in the above given inner diameter and outer diameter sizes.</strong></p><p class="md-block-unstyled">Shim washers and flat washers are inherently different in their purpose and tolerances. Here are three differences that set shim washers apart from flat washers.</p><p class="md-block-unstyled">Purpose And Usage</p><p class="md-block-unstyled">They serve a different purpose in life. While flat washers are used for fastening, load distribution and surface protection, shim washers are used for gap alignment. Flat washers are usually used together with screws, bolts or nuts. While shim washers can be used in the same way, they can be slotted into threaded screws or axles to carry out their job.</p><p class="md-block-unstyled">Tolerances</p><p class="md-block-unstyled">Based on DIN125A standard, flat washers are produced with nominal dimensions with no tolerance values given. Our flat washers are supplied with the understanding that the thickness variance will range from 0 to 0.2mm. For example, an M3 flat washer will have thickness ranging from 0.4mm to 0.6mm, even in the same batch!</p><p class="md-block-unstyled">Shim washers are produced to close tolerances, usually up to 0.2mm for ID and OD, and as small as +/-0.02mm for thickness. </p><p class="md-block-unstyled">In short, shim washers are more precise than flat washers because they have to be. During gap alignment or leveling, minor differences in thickness and diameters must be taken into account for fear of misalignment. </p><p class="md-block-unstyled">Available Thickness</p><p class="md-block-unstyled">Flat washers usually have a single thickness based on a given ID and OD. For example, an M3 flat washer with ID 3.2mm and OD 6mm will have thickness 0.4mm. If you are lucky (or not), you might find some with 0.5mm in the same batch. Not reassuring? Not to worry, being used for fastening, the thickness of flat washers is usually not a focal point.</p><p class="md-block-unstyled">Product Description: Shim Ring (Also known as Shim Washer)</p><p class="md-block-unstyled">Manufacturer: Iwata Manufacturing Co., Ltd</p><p class="md-block-unstyled">Materials: Carbon Steel (SPCC), Brass and 304 Stainless Steel</p><p class="md-block-unstyled">ID: 30mm</p><p class="md-block-unstyled">OD: 45mm</p><p class="md-block-unstyled">Thickness: 0.01mm to 1mm.</p><p class="md-block-unstyled">Quantity Per Package: 10 pcs</p><p class="md-block-unstyled">Country of Origin: Japan</p>

<h3><strong>Shim Ring, Inner Diameter 30mm X Outer Diameter 45mm, Pack of 10 (Available in Brass, Carbon Steel and 304 Stainless Steel)</strong></h3>
<p><strong>Shim Rings, also known as Shim Washers, are available in various thickness to align gaps and uneven surfaces. Shim washers look similar to flat washers, but are different in their usage and purpose.</strong></p>
<p><strong>Produced in Japan, these are made to extremely precise tolerances and are free from burrs. We are able to offer shim washers in different materials such as Brass, Carbon Steel (SPCC) and 304 stainless steel.</strong></p>
<p><strong>Use them for screws, axles, bearing faces and machine bases. Depending on the material, thickness variants range from 0.01mm to 1mm. Each package contains 10 pcs of the same thickness in the above given inner diameter and outer diameter sizes.</strong></p>
<p>Shim washers and flat washers are inherently different in their purpose and tolerances. Here are three differences that set shim washers apart from flat washers.</p>
<p>Purpose And Usage</p>
<p>They serve a different purpose in life. While flat washers are used for fastening, load distribution and surface protection, shim washers are used for gap alignment. Flat washers are usually used together with screws, bolts or nuts. While shim washers can be used in the same way, they can be slotted into threaded screws or axles to carry out their job.</p>
<p>Tolerances</p>
<p>Based on DIN125A standard, flat washers are produced with nominal dimensions with no tolerance values given. Our flat washers are supplied with the understanding that the thickness variance will range from 0 to 0.2mm. For example, an M3 flat washer will have thickness ranging from 0.4mm to 0.6mm, even in the same batch!</p>
<p>Shim washers are produced to close tolerances, usually up to 0.2mm for ID and OD, and as small as +/-0.02mm for thickness. </p>
<p>In short, shim washers are more precise than flat washers because they have to be. During gap alignment or leveling, minor differences in thickness and diameters must be taken into account for fear of misalignment. </p>
<p>Available Thickness</p>
<p>Flat washers usually have a single thickness based on a given ID and OD. For example, an M3 flat washer with ID 3.2mm and OD 6mm will have thickness 0.4mm. If you are lucky (or not), you might find some with 0.5mm in the same batch. Not reassuring? Not to worry, being used for fastening, the thickness of flat washers is usually not a focal point.</p>
<p>Product Description: Shim Ring (Also known as Shim Washer)</p>
<p>Manufacturer: Iwata Manufacturing Co., Ltd</p>
<p>Materials: Carbon Steel (SPCC), Brass and 304 Stainless Steel</p>
<p>ID: 30mm</p>
<p>OD: 45mm</p>
<p>Thickness: 0.01mm to 1mm.</p>
<p>Quantity Per Package: 10 pcs</p>
<p>Country of Origin: Japan</p>


Iwata Shim Ring, Inner Diameter 30mm X Outer Diameter 45mm, Pack of 10

iwata shim ring, inner diameter 30mm outer 45mm, pack 10 cincin iwata, dalam luar kemasan buah washers pek iwata/岩田 垫片环，内径 30 毫米 外径 45 毫米，10 个一包 岩田

iwata-shim-ring-inner-diameter-30mm-x-outer-diameter-45mm-pack-of-10

Carbon Steel ID 30mm x OD 45mm x 0.10mm PN RF030045010, Pack of 10 Pieces

Carbon Steel ID 30mm x OD 45mm x 0.15mm PN RF030045015, Pack of 10 Pieces

Carbon Steel ID 30mm x OD 45mm x 0.20mm PN RF030045020, Pack of 10 Pieces

Carbon Steel ID 30mm x OD 45mm x 0.30mm PN RF030045030, Pack of 10 Pieces

Carbon Steel ID 30mm x OD 45mm x 0.50mm PN RF030045050, Pack of 10 Pieces

Carbon Steel ID 30mm x OD 45mm x 1mm PN RF030045100, Pack of 10 Pieces

Brass ID 30mm x OD 45mm x 0.05mm PN RB030045005, Pack of 10 Pieces

Brass ID 30mm x OD 45mm x 0.10mm PN RB030045010, Pack of 10 Pieces

Brass ID 30mm x OD 45mm x 0.15mm PN RB030045015, Pack of 10 Pieces

Brass ID 30mm x OD 45mm x 0.20mm PN RB030045020, Pack of 10 Pieces

Brass ID 30mm x OD 45mm x 0.30mm PN RB030045030, Pack of 10 Pieces

Brass ID 30mm x OD 45mm x 0.50mm PN RB0030045050, Pack of 10 Pieces

Brass ID 30mm x OD 45mm x 1mm PN RB030045100, Pack of 10 Pieces

304 SST ID 30mm x OD 45mm x 0.01mm PN RS030045001, Pack of 10 Pieces

304 SST ID 30mm x OD 45mm x 0.02mm PN RS030045002, Pack of 10 Pieces

304 SST ID 30mm x OD 45mm x 0.03mm PN RS030045003, Pack of 10 Pieces

304 SST ID 30mm x OD 45mm x 0.05mm PN RS030045005, Pack of 10 Pieces

304 SST ID 30mm x OD 45mm x 0.10mm PN RS030045010, Pack of 10 Pieces

304 SST ID 30mm x OD 45mm x 0.15mm PN RS030045015, Pack of 10 Pieces

304 SST ID 30mm x OD 45mm x 0.20mm PN RS030045020, Pack of 10 Pieces

304 SST ID 30mm x OD 45mm x 0.30mm PN RS030045030, Pack of 10 Pieces

304 SST ID 30mm x OD 45mm x 0.50mm PN RS030045050, Pack of 10 Pieces

304 SST ID 30mm x OD 45mm x 1mm PN RS030045100, Pack of 10 Pieces

Surface Treatment: Trivalent Chromate Plating

<h3 class="md-block-header-three">Features:</h3><ul class="md-block-unordered-list-item"><li>Standard set collar attached with set screw</li><li>The inner ring of bearing can be held down by 30° chamfer</li><li>Can be used to fix sprockets and gears</li><li>Material is iron</li></ul><h3 class="md-block-header-three">Specification:</h3><ul class="md-block-unordered-list-item"><li>Brand: Iwata</li><li>Product Type: Basic Shaft Collar</li><li>Material: Iron S45C</li><li>Surface Treatment: Trivalent Chromate Plating</li><li>Inner Diameter (φB): 30 mm</li><li>Width (L): 20 mm</li><li>Outer Diameter (φD): 49 mm</li><li>Chamfer Diameter (φD1): 42 mm</li><li>Tightening Screw (M): M8x8</li></ul><h3 class="md-block-header-three">Accessories:</h3><ul class="md-block-unordered-list-item"><li>Hex Socket Set Screws (Recessed SUSXM7) - 2 Piece</li></ul>

<h3>Features:</h3>
<ul>
<li>Standard set collar attached with set screw</li>
<li>The inner ring of bearing can be held down by 30° chamfer</li>
<li>Can be used to fix sprockets and gears</li>
<li>Material is iron</li>
</ul>
<h3>Specification:</h3>
<ul>
<li>Brand: Iwata</li>
<li>Product Type: Basic Shaft Collar</li>
<li>Material: Iron S45C</li>
<li>Surface Treatment: Trivalent Chromate Plating</li>
<li>Inner Diameter (φB): 30 mm</li>
<li>Width (L): 20 mm</li>
<li>Outer Diameter (φD): 49 mm</li>
<li>Chamfer Diameter (φD1): 42 mm</li>
<li>Tightening Screw (M): M8x8</li>
</ul>
<h3>Accessories:</h3>
<ul>
<li>Hex Socket Set Screws (Recessed SUSXM7) - 2 Piece</li>
</ul>


Iwata Iron Trivalent Chromate Plating Basic Shaft Collar 30mm X 20mm SC3020U

iwata iron trivalent chromate plating basic shaft collar 30mm x 20mm sc3020u ball bearings bearing bebola iwata/岩田 县铁三价铬酸盐电镀基础轴环30mm 球轴承 岩田

iwata-iron-trivalent-chromate-plating-basic-shaft-collar-30mm-x-20mm-sc3020u

Shim Ring, Inner Diameter 30mm X Outer Diameter 50mm, Pack of 10 (Available in Brass, Carbon Steel and 304 Stainless Steel)

<h3 class="md-block-header-three"><strong class="md-inline-bold">Shim Ring, Inner Diameter 30mm X Outer Diameter 50mm, Pack of 10 (Available in Brass, Carbon Steel and 304 Stainless Steel)</strong></h3><p class="md-block-unstyled"><strong class="md-inline-bold">Shim Rings, also known as Shim Washers, are available in various thickness to align gaps and uneven surfaces. Shim washers look similar to flat washers, but are different in their usage and purpose.</strong></p><p class="md-block-unstyled"><strong class="md-inline-bold">Produced in Japan, these are made to extremely precise tolerances and are free from burrs. We are able to offer shim washers in different materials such as Brass, Carbon Steel (SPCC) and 304 stainless steel.</strong></p><p class="md-block-unstyled"><strong class="md-inline-bold">Use them for screws, axles, bearing faces and machine bases. Depending on the material, thickness variants range from 0.01mm to 1mm. Each package contains 10 pcs of the same thickness in the above given inner diameter and outer diameter sizes.</strong></p><p class="md-block-unstyled">Shim washers and flat washers are inherently different in their purpose and tolerances. Here are three differences that set shim washers apart from flat washers.</p><p class="md-block-unstyled">Purpose And Usage</p><p class="md-block-unstyled">They serve a different purpose in life. While flat washers are used for fastening, load distribution and surface protection, shim washers are used for gap alignment. Flat washers are usually used together with screws, bolts or nuts. While shim washers can be used in the same way, they can be slotted into threaded screws or axles to carry out their job.</p><p class="md-block-unstyled">Tolerances</p><p class="md-block-unstyled">Based on DIN125A standard, flat washers are produced with nominal dimensions with no tolerance values given. Our flat washers are supplied with the understanding that the thickness variance will range from 0 to 0.2mm. For example, an M3 flat washer will have thickness ranging from 0.4mm to 0.6mm, even in the same batch!</p><p class="md-block-unstyled">Shim washers are produced to close tolerances, usually up to 0.2mm for ID and OD, and as small as +/-0.02mm for thickness. </p><p class="md-block-unstyled">In short, shim washers are more precise than flat washers because they have to be. During gap alignment or leveling, minor differences in thickness and diameters must be taken into account for fear of misalignment. </p><p class="md-block-unstyled">Available Thickness</p><p class="md-block-unstyled">Flat washers usually have a single thickness based on a given ID and OD. For example, an M3 flat washer with ID 3.2mm and OD 6mm will have thickness 0.4mm. If you are lucky (or not), you might find some with 0.5mm in the same batch. Not reassuring? Not to worry, being used for fastening, the thickness of flat washers is usually not a focal point.</p><p class="md-block-unstyled">Product Description: Shim Ring (Also known as Shim Washer)</p><p class="md-block-unstyled">Manufacturer: Iwata Manufacturing Co., Ltd</p><p class="md-block-unstyled">Materials: Carbon Steel (SPCC), Brass and 304 Stainless Steel</p><p class="md-block-unstyled">ID: 30mm</p><p class="md-block-unstyled">OD: 50mm</p><p class="md-block-unstyled">Thickness: 0.01mm to 1mm.</p><p class="md-block-unstyled">Quantity Per Package: 10 pcs</p><p class="md-block-unstyled">Country of Origin: Japan</p>

<h3><strong>Shim Ring, Inner Diameter 30mm X Outer Diameter 50mm, Pack of 10 (Available in Brass, Carbon Steel and 304 Stainless Steel)</strong></h3>
<p><strong>Shim Rings, also known as Shim Washers, are available in various thickness to align gaps and uneven surfaces. Shim washers look similar to flat washers, but are different in their usage and purpose.</strong></p>
<p><strong>Produced in Japan, these are made to extremely precise tolerances and are free from burrs. We are able to offer shim washers in different materials such as Brass, Carbon Steel (SPCC) and 304 stainless steel.</strong></p>
<p><strong>Use them for screws, axles, bearing faces and machine bases. Depending on the material, thickness variants range from 0.01mm to 1mm. Each package contains 10 pcs of the same thickness in the above given inner diameter and outer diameter sizes.</strong></p>
<p>Shim washers and flat washers are inherently different in their purpose and tolerances. Here are three differences that set shim washers apart from flat washers.</p>
<p>Purpose And Usage</p>
<p>They serve a different purpose in life. While flat washers are used for fastening, load distribution and surface protection, shim washers are used for gap alignment. Flat washers are usually used together with screws, bolts or nuts. While shim washers can be used in the same way, they can be slotted into threaded screws or axles to carry out their job.</p>
<p>Tolerances</p>
<p>Based on DIN125A standard, flat washers are produced with nominal dimensions with no tolerance values given. Our flat washers are supplied with the understanding that the thickness variance will range from 0 to 0.2mm. For example, an M3 flat washer will have thickness ranging from 0.4mm to 0.6mm, even in the same batch!</p>
<p>Shim washers are produced to close tolerances, usually up to 0.2mm for ID and OD, and as small as +/-0.02mm for thickness. </p>
<p>In short, shim washers are more precise than flat washers because they have to be. During gap alignment or leveling, minor differences in thickness and diameters must be taken into account for fear of misalignment. </p>
<p>Available Thickness</p>
<p>Flat washers usually have a single thickness based on a given ID and OD. For example, an M3 flat washer with ID 3.2mm and OD 6mm will have thickness 0.4mm. If you are lucky (or not), you might find some with 0.5mm in the same batch. Not reassuring? Not to worry, being used for fastening, the thickness of flat washers is usually not a focal point.</p>
<p>Product Description: Shim Ring (Also known as Shim Washer)</p>
<p>Manufacturer: Iwata Manufacturing Co., Ltd</p>
<p>Materials: Carbon Steel (SPCC), Brass and 304 Stainless Steel</p>
<p>ID: 30mm</p>
<p>OD: 50mm</p>
<p>Thickness: 0.01mm to 1mm.</p>
<p>Quantity Per Package: 10 pcs</p>
<p>Country of Origin: Japan</p>


Iwata Shim Ring, Inner Diameter 30mm X Outer Diameter 50mm, Pack of 10

iwata shim ring, inner diameter 30mm outer 50mm, pack 10 cincin iwata, dalam luar kemasan buah washers pek iwata/岩田 垫片环，内径 30 毫米 外径 50 毫米，10 个一包 岩田

iwata-shim-ring-inner-diameter-30mm-x-outer-diameter-50mm-pack-of-10

Carbon Steel ID 30mm x OD 50mm x 0.10mm PN RF030050010, Pack of 10 Pieces

Carbon Steel ID 30mm x OD 50mm x 0.15mm PN RF030050015, Pack of 10 Pieces

Carbon Steel ID 30mm x OD 50mm x 0.20mm PN RF030050020, Pack of 10 Pieces

Carbon Steel ID 30mm x OD 50mm x 0.30mm PN RF030050030, Pack of 10 Pieces

Carbon Steel ID 30mm x OD 50mm x 0.50mm PN RF030050050, Pack of 10 Pieces

Carbon Steel ID 30mm x OD 50mm x 1mm PN RF030050100, Pack of 10 Pieces

Brass ID 30mm x OD 50mm x 0.05mm PN RB030050005, Pack of 10 Pieces

Brass ID 30mm x OD 50mm x 0.10mm PN RB030050010, Pack of 10 Pieces

Brass ID 30mm x OD 50mm x 0.15mm PN RB030050015, Pack of 10 Pieces

Brass ID 30mm x OD 50mm x 0.20mm PN RB030050020, Pack of 10 Pieces

Brass ID 30mm x OD 50mm x 0.30mm PN RB030050030, Pack of 10 Pieces

Brass ID 30mm x OD 50mm x 0.50mm PN RB0030050050, Pack of 10 Pieces

Brass ID 30mm x OD 50mm x 1mm PN RB030050100, Pack of 10 Pieces

304 SST ID 30mm x OD 50mm x 0.01mm PN RS030050001, Pack of 10 Pieces

304 SST ID 30mm x OD 50mm x 0.02mm PN RS030050002, Pack of 10 Pieces

304 SST ID 30mm x OD 50mm x 0.03mm PN RS030050003, Pack of 10 Pieces

304 SST ID 30mm x OD 50mm x 0.05mm PN RS030050005, Pack of 10 Pieces

304 SST ID 30mm x OD 50mm x 0.10mm PN RS030050010, Pack of 10 Pieces

304 SST ID 30mm x OD 50mm x 0.15mm PN RS030050015, Pack of 10 Pieces

304 SST ID 30mm x OD 50mm x 0.20mm PN RS030050020, Pack of 10 Pieces

304 SST ID 30mm x OD 50mm x 0.30mm PN RS030050030, Pack of 10 Pieces

304 SST ID 30mm x OD 50mm x 0.50mm PN RS030050050, Pack of 10 Pieces

304 SST ID 30mm x OD 50mm x 1mm PN RS030050100, Pack of 10 Pieces

Precision Brand Metric Snap Ring Asst 13980

External, black phosphate coated, metric size, spring steel snap ring. Used to retain pulleys, gears, or wheels on shafts. Handy kit for shop toolroom or toolbox. On hand when needed saves time and money. Plastic compartment box is easy to store.

<h3 class="md-block-header-three">Precision Brand Metric Snap Ring Asst 13980</h3><p class="md-block-unstyled">External, black phosphate coated, metric size, spring steel snap ring. Used to retain pulleys, gears, or wheels on shafts. Handy kit for shop toolroom or toolbox. On hand when needed saves time and money. Plastic compartment box is easy to store.</p><h3 class="md-block-header-three">Specification:</h3><ul class="md-block-unordered-list-item"><li>Brand: Precision Brand</li><li>Product Type: Metric Snap Ring</li><li>Material: Spring Steel</li><li>Weight: 0.65 kg</li><li>Quantity Per Package: 295 Pieces/Box</li></ul><h3 class="md-block-header-three">Kit Contents:</h3><figure class="md-block-image"><img src="https://storage.googleapis.com/eezee-product-images/J6VzU~kw0plUNWqw53EyKb.png" alt="" /><figcaption class="md-block-image-caption"></figcaption></figure>

<h3>Precision Brand Metric Snap Ring Asst 13980</h3>
<p>External, black phosphate coated, metric size, spring steel snap ring. Used to retain pulleys, gears, or wheels on shafts. Handy kit for shop toolroom or toolbox. On hand when needed saves time and money. Plastic compartment box is easy to store.</p>
<h3>Specification:</h3>
<ul>
<li>Brand: Precision Brand</li>
<li>Product Type: Metric Snap Ring</li>
<li>Material: Spring Steel</li>
<li>Weight: 0.65 kg</li>
<li>Quantity Per Package: 295 Pieces/Box</li>
</ul>
<h3>Kit Contents:</h3>

        <div class="img-ctnr">
          <amp-img  
            on="tap:cg16h"
            tabindex="0"
            role="button"
            class="contain"
            layout="fill"
            src="https://storage.googleapis.com/eezee-product-images/J6VzU~kw0plUNWqw53EyKb.png"
          ></amp-img>
        </div>
    
        <amp-image-lightbox 
          id="cg16h" 
          layout="nodisplay"></amp-image-lightbox>

        


Precision Brand Metric Snap Ring Assortment 13980

precision brand metric snap ring assortment 13980 berbagai macam cincin jepret metrik merek presisi fastener assortments pelbagai jenama ketepatan brand/精密品牌 公制挡圈组合 精密品牌