Analog Devices

BERGER PAINTS

MULTICOMP PRO

TIGER BRAND PAINT

Painting Materials

painting-materials

Primers, Sealers & Undercoats

primers-sealers-undercoats

Resistor

resistor

Through Hole Resistors

through-hole-resistors

Electricals

electricals

Transceiver

transceiver

Tiger Brand 5L/16L Tiger Aluminum Paint (AP-203)

Tiger Brand Aluminum AP-203 is a single component based alkyd finish for both exterior and interior use. 

Tiger Brand Aluminum 203 is a silver-coloured topcoat for use on steel and wood substrates. 

Suitably for use direct on steel or primed steel. 

 Easy to apply with good hiding power. 

 Excellent color retention for both exterior and interior. 

Tiger Brand Aluminum AP-203 could be applied directly to freshly blasted steel. *Could also be used on well prepared steel with existing or aged two-component coatings. The temperature of the substrate should be at least 3oCelcius above the dew point. 

Can be applied by either airless or conventional spray. Tiger Brand Aluminium AP-203 can be applied by roller or brush, however, multiple coats may be needed to achieve the recommended film thickness. 

Recommended Wet film thickness: 110 microns 

Spreading rate: 9 m2/litre (calculated) Aluminum Paint AP-203 

If thinning is required please use Thinner 237 up to 10% part by weight. 

All equipment should be thoroughly cleaned with Thinner 237 after use. 

The product comes in both 1, 3.5, 5 and 20 litres packing. Must be stored in cool well ventilated area away from direct sunlight. 

Do not inhale spray mist. Remove all contaminated clothing and wash skin with suitable proprietary cleaners or soap and water. In case of contact with eyes, flush immediately with water for at least 15 minutes. If persistent discomfort or irritation occurs after application please seek medical advice. 

*It is the responsibility of the clients to ensure that there is no wrinkling or delamination of aged or existing coating by Tiger Brand Aluminum 237 

<h3 class="md-block-header-three">Tiger Brand 5L/16L Tiger Aluminum Paint (AP-203)</h3>TECHNICAL DATA SHEET Tiger Brand Aluminum AP-203 Solvent Based Alkyd Aluminum Paint DESCRIPTION: Tiger Brand Aluminum AP-203 is a single component based alkyd finish for both exterior and interior use. TYPICAL USES: Tiger Brand Aluminum 203 is a silver-coloured topcoat for use on steel and wood substrates. SUBSTRATES/SURFACES: Suitably for use direct on steel or primed steel. ADVANTAGES:  Easy to apply with good hiding power.  Excellent color retention for both exterior and interior.  Excellent weatherability.  Good hiding power. TECHNICAL DATA @ 250C: Colour: Sliver Volume Solids: 32.0% Viscosity 60.5 KU (+/-) 2.0 Specific Gravity 1.00 (+/-) 0.15 Dry to touch: 1 hour Hard Dry 4 hours DIRECTIONS FOR USE: Surface Preparation Tiger Brand Aluminum AP-203 could be applied directly to freshly blasted steel. *Could also be used on well prepared steel with existing or aged two-component coatings. The temperature of the substrate should be at least 3oCelcius above the dew point. Application Can be applied by either airless or conventional spray. Tiger Brand Aluminium AP-203 can be applied by roller or brush, however, multiple coats may be needed to achieve the recommended film thickness. Spreading Information Recommended Wet film thickness: 110 microns Dry film thickness: 40 microns Spreading rate: 9 m2/litre (calculated) Aluminum Paint AP-203 Thinning If thinning is required please use Thinner 237 up to 10% part by weight. Cleaning All equipment should be thoroughly cleaned with Thinner 237 after use. PACKAGING AND STORAGE: The product comes in both 1, 3.5, 5 and 20 litres packing. Must be stored in cool well ventilated area away from direct sunlight. HEALTH AND SAFETY: Do not inhale spray mist. Remove all contaminated clothing and wash skin with suitable proprietary cleaners or soap and water. In case of contact with eyes, flush immediately with water for at least 15 minutes. If persistent discomfort or irritation occurs after application please seek medical advice. *It is the responsibility of the clients to ensure that there is no wrinkling or delamination of aged or existing coating by Tiger Brand Aluminum 237

<h3>Tiger Brand 5L/16L Tiger Aluminum Paint (AP-203)</h3>
TECHNICAL DATA SHEET&nbsp;
Tiger Brand Aluminum AP-203&nbsp;
Solvent Based Alkyd Aluminum Paint&nbsp;
DESCRIPTION:&nbsp;
Tiger Brand Aluminum AP-203 is a single component based alkyd finish for both exterior and interior use.&nbsp;
TYPICAL USES:&nbsp;
Tiger Brand Aluminum 203 is a silver-coloured topcoat for use on steel and wood substrates.&nbsp;
SUBSTRATES/SURFACES:&nbsp;
Suitably for use direct on steel or primed steel.&nbsp;
ADVANTAGES:&nbsp;
 Easy to apply with good hiding power.&nbsp;
 Excellent color retention for both exterior and interior.&nbsp;
 Excellent weatherability.&nbsp;
 Good hiding power.&nbsp;
TECHNICAL DATA @ 250C:&nbsp;
Colour: Sliver&nbsp;
Volume Solids: 32.0%&nbsp;
Viscosity 60.5 KU (+/-) 2.0&nbsp;
Specific Gravity 1.00 (+/-) 0.15&nbsp;
Dry to touch: 1 hour&nbsp;
Hard Dry 4 hours&nbsp;
DIRECTIONS FOR USE:&nbsp;
Surface Preparation&nbsp;
Tiger Brand Aluminum AP-203 could be applied directly to freshly blasted steel. *Could also be used on well prepared steel with existing or aged two-component coatings. The temperature of the substrate should be at least 3oCelcius above the dew point.&nbsp;
Application&nbsp;
Can be applied by either airless or conventional spray. Tiger Brand Aluminium AP-203 can be applied by roller or brush, however, multiple coats may be needed to achieve the recommended film thickness.&nbsp;
Spreading Information&nbsp;
Recommended Wet film thickness: 110 microns&nbsp;
Dry film thickness: 40 microns&nbsp;
Spreading rate: 9 m2/litre (calculated) Aluminum Paint AP-203&nbsp;
Thinning&nbsp;
If thinning is required please use Thinner 237 up to 10% part by weight.&nbsp;
Cleaning&nbsp;
All equipment should be thoroughly cleaned with Thinner 237 after use.&nbsp;
PACKAGING AND STORAGE:&nbsp;
The product comes in both 1, 3.5, 5 and 20 litres packing. Must be stored in cool well ventilated area away from direct sunlight.&nbsp;
HEALTH AND SAFETY:&nbsp;
Do not inhale spray mist. Remove all contaminated clothing and wash skin with suitable proprietary cleaners or soap and water. In case of contact with eyes, flush immediately with water for at least 15 minutes. If persistent discomfort or irritation occurs after application please seek medical advice.&nbsp;
*It is the responsibility of the clients to ensure that there is no wrinkling or delamination of aged or existing coating by Tiger Brand Aluminum 237&nbsp;

Ms Mah

Tiger Brand 5l Tiger Aluminum Paint (AP-203)

tiger brand 5l aluminum paint (ap-203) cat alumunium merk primers, sealers undercoats primer, sealer lapisan bawah aluminium asas, pengedap alas paint/老虎品牌油漆 虎牌5l虎铝漆（ap-203） 底漆，密封剂和底漆 老虎品牌油漆

tiger-brand-5l-tiger-aluminum-paint-ap-203

Weight

Primer Red Oxide Luxaprime #1000 5L Berger

<h3 class="md-block-header-three">Primer Red Oxide Luxaprime #1000 5L Berger</h3>

<h3>Primer Red Oxide Luxaprime #1000 5L Berger</h3>

Ian Ong

ELORA

WEICON

LOCTITE

Others

METABO

Permatex

DEVCON

Molykote

WD40

Adhesive Glue

Threadlocker

Lubricants

Sealants

Socket Accessories

Anti Rust Coating & Lubricant

Degreasers

Epoxy

Other Tools

Grease

Alfred/Sharon

buyerIntroduction

primer red oxide luxaprime #1000 5l berger luxaprome primers, sealers undercoats primer, sealer lapisan bawah paints cat asas, pengedap alas paints/柏格涂料 底漆，密封剂和底漆 柏格涂料

primer-red-oxide-luxaprime-1000-5l-berger

Technical Data Sheet (210.71KB) EN

MULTICOMP

Duratool

Surface Mount Resistors

Multilayer Ceramic Capacitors

Junction & Enclosure Box

Voltage Regulators

Voltage Supervisors & Monitors

Voltage References

Hook Up Wires

Circular Connectors

PCB Headers

Element14

Analog Devices LTC2852MPMS#PBF RS422/RS485 Transceiver, -55 to 125DEG C

analog devices ltc2852mpms#pbf rs422/rs485 transceiver, -55 125deg transceiver ltc2852mpms#pbf, hingga pemancar peranti devices/模拟设备 收发器，-55 125°c 收发器 模拟设备

analog-devices-ltc2852mpms-pbf-rs422-rs485-transceiver-55-to-125deg-c

Technical Data Sheet (522.92KB) EN

Analog Devices MAX206CWG+ RS232 Txrx, 116KBPS, 5.5V, WSOIC-24

analog devices max206cwg+ rs232 txrx, 116kbps, 5.5v, wsoic-24 perangkat transceiver pemancar peranti devices/模拟设备 adi txrx，116kbps，5.5v，wsoic-24 收发器 模拟设备

analog-devices-max206cwg-rs232-txrx-116kbps-5-5v-wsoic-24

Technical Data Sheet (459.44KB) EN

Analog Devices ADM3312EACPZ RS232 Transceiver, -40 to 85DEG C

analog devices adm3312eacpz rs232 transceiver, -40 85deg transceiver adm3312eacpz, hingga pemancar peranti devices/模拟设备 adi 公司 收发器，-40 85°c 收发器 模拟设备

analog-devices-adm3312eacpz-rs232-transceiver-40-to-85deg-c

Technical Data Sheet (480.10KB) EN

Analog Devices ADM3307EACPZ-REEL7 RS232 Transceiver, -40 to 85DEG C

analog devices adm3307eacpz-reel7 rs232 transceiver, -40 85deg transceiver adm3307eacpz-reel7, hingga pemancar peranti devices/模拟设备 adi 公司 收发器，-40 85°c 收发器 模拟设备

analog-devices-adm3307eacpz-reel7-rs232-transceiver-40-to-85deg-c

Analog Devices ADM3307EACPZ RS232 Transceiver, -40 to 85DEG C

analog devices adm3307eacpz rs232 transceiver, -40 85deg transceiver adm3307eacpz, hingga pemancar peranti devices/模拟设备 adi 公司 收发器，-40 85°c 收发器 模拟设备

analog-devices-adm3307eacpz-rs232-transceiver-40-to-85deg-c

Technical Data Sheet (516.85KB) EN

Multicomp Pro MOR07WJ0102B09 Res, 1K, 5%, 7W, Axial, Metal Oxide

multicomp pro mor07wj0102b09 res, 1k, 5%, 7w, axial, metal oxide aksial, oksida logam hole resistors 分辨率，1k，5%，7w，轴向，金属氧化物 多计算机专业版

multicomp-pro-mor07wj0102b09-res-1k-5-7w-axial-metal-oxide

Technical Data Sheet (407.93KB) EN

Multicomp Pro MCKNP03UJ0102B00 Res, 1K, 5%, 3W, Axial, Wirewound

multicomp pro mcknp03uj0102b00 res, 1k, 5%, 3w, axial, wirewound aksial, hole resistors 分辨率，1k，5%，3w，轴向，线绕 多计算机专业版

multicomp-pro-mcknp03uj0102b00-res-1k-5-3w-axial-wirewound

Technical Data Sheet (298.60KB) EN

Multicomp Pro MCPKNPA3WJ0102AA9 Resistor, 1K, 5%, 3W, Axial

multicomp pro mcpknpa3wj0102aa9 resistor, 1k, 5%, 3w, axial resistor mcpknpa3wj0102aa9, aksial hole resistors perintang, paksi 电阻器，1k，5%，3w，轴向 多计算机专业版

multicomp-pro-mcpknpa3wj0102aa9-resistor-1k-5-3w-axial

Technical Data Sheet (479.40KB) EN

Multicomp Pro MP006005 Res, 1K, 5W, Axial, Metal Oxide

multicomp pro mp006005 res, 1k, 5w, axial, metal oxide aksial, oksida logam hole resistors 分辨率，1k，5w，轴向，金属氧化物 多计算机专业版

multicomp-pro-mp006005-res-1k-5w-axial-metal-oxide

Multicomp Pro MCPKNPA3SJ0102A19 Resistor, 1K, 5%, 3W, Axial

multicomp pro mcpknpa3sj0102a19 resistor, 1k, 5%, 3w, axial resistor mcpknpa3sj0102a19, aksial hole resistors perintang, paksi 电阻器，1k，5%，3w，轴向 多计算机专业版

multicomp-pro-mcpknpa3sj0102a19-resistor-1k-5-3w-axial

Technical Data Sheet (349.72KB) EN

Multicomp Pro MP006409 Res, 1K, 1W, Axial, Metal Oxide

multicomp pro mp006409 res, 1k, 1w, axial, metal oxide aksial, oksida logam hole resistors 分辨率，1k，1w，轴向，金属氧化物 多计算机专业版

multicomp-pro-mp006409-res-1k-1w-axial-metal-oxide

Multicomp Pro MOR03SJ0102A19 Res, 1K, 5%, 3W, Axial, Metal Oxide

multicomp pro mor03sj0102a19 res, 1k, 5%, 3w, axial, metal oxide aksial, oksida logam hole resistors 分辨率，1k，5%，3w，轴向，金属氧化物 多计算机专业版

multicomp-pro-mor03sj0102a19-res-1k-5-3w-axial-metal-oxide

Multicomp Pro MOR01SJ0102A10 Res, 1K, 5%, 1W, Axial, Metal Oxide

multicomp pro mor01sj0102a10 res, 1k, 5%, 1w, axial, metal oxide aksial, oksida logam hole resistors 分辨率，1k，5%，1w，轴向，金属氧化物 多计算机专业版

multicomp-pro-mor01sj0102a10-res-1k-5-1w-axial-metal-oxide

Multicomp Pro MOR0S2J0102A50 Res, 1K, 5%, 500MW, Axial, Metal Oxide

multicomp pro mor0s2j0102a50 res, 1k, 5%, 500mw, axial, metal oxide aksial, oksida logam hole resistors res，1k，5%，500mw，轴向，金属氧化物 多计算机专业版

multicomp-pro-mor0s2j0102a50-res-1k-5-500mw-axial-metal-oxide

multicomp pro mp006409 res, 1k, 1w, axial, metal oxide aksial, oksida logam hole resistors res，1k，1w，轴向，金属氧化物 多计算机专业版

Construction

construction

Putty

putty