Iwata

Fasteners

fasteners

Eye Bolts

eye-bolts

Painting Materials

painting-materials

Painting Tools

painting-tools

Washers

washers

Shim Ring, Inner Diameter 10mm X Outer Diameter 13mm, Pack of 10 (Available in Brass, Carbon Steel and 304 Stainless Steel)

Shim Rings, also known as Shim Washers, are available in various thickness to align gaps and uneven surfaces. Shim washers look similar to flat washers, but are different in their usage and purpose.

Produced in Japan, these are made to extremely precise tolerances and are free from burrs. We are able to offer shim washers in different materials such as Brass, Carbon Steel (SPCC) and 304 stainless steel.

Use them for screws, axles, bearing faces and machine bases. Depending on the material, thickness variants range from 0.01mm to 1mm. Each package contains 10 pcs of the same thickness in the above given inner diameter and outer diameter sizes.

Shim washers and flat washers are inherently different in their purpose and tolerances. Here are three differences that set shim washers apart from flat washers.

They serve a different purpose in life. While flat washers are used for fastening, load distribution and surface protection, shim washers are used for gap alignment. Flat washers are usually used together with screws, bolts or nuts. While shim washers can be used in the same way, they can be slotted into threaded screws or axles to carry out their job.

Based on DIN125A standard, flat washers are produced with nominal dimensions with no tolerance values given. Our flat washers are supplied with the understanding that the thickness variance will range from 0 to 0.2mm. For example, an M3 flat washer will have thickness ranging from 0.4mm to 0.6mm, even in the same batch!

Shim washers are produced to close tolerances, usually up to 0.2mm for ID and OD, and as small as +/-0.02mm for thickness. 

In short, shim washers are more precise than flat washers because they have to be. During gap alignment or leveling, minor differences in thickness and diameters must be taken into account for fear of misalignment. 

Flat washers usually have a single thickness based on a given ID and OD. For example, an M3 flat washer with ID 3.2mm and OD 6mm will have thickness 0.4mm. If you are lucky (or not), you might find some with 0.5mm in the same batch. Not reassuring? Not to worry, being used for fastening, the thickness of flat washers is usually not a focal point.

Product Description: Shim Ring (Also known as Shim Washer)

Manufacturer: Iwata Manufacturing Co., Ltd

Materials: Carbon Steel (SPCC), Brass and 304 Stainless Steel

<h3 class="md-block-header-three">Shim Ring, Inner Diameter 10mm X Outer Diameter 13mm, Pack of 10 (Available in Brass, Carbon Steel and 304 Stainless Steel)</h3>Shim Rings, also known as Shim Washers, are available in various thickness to align gaps and uneven surfaces. Shim washers look similar to flat washers, but are different in their usage and purpose.Produced in Japan, these are made to extremely precise tolerances and are free from burrs. We are able to offer shim washers in different materials such as Brass, Carbon Steel (SPCC) and 304 stainless steel.Use them for screws, axles, bearing faces and machine bases. Depending on the material, thickness variants range from 0.01mm to 1mm. Each package contains 10 pcs of the same thickness in the above given inner diameter and outer diameter sizes.Shim washers and flat washers are inherently different in their purpose and tolerances. Here are three differences that set shim washers apart from flat washers.Purpose And UsageThey serve a different purpose in life. While flat washers are used for fastening, load distribution and surface protection, shim washers are used for gap alignment. Flat washers are usually used together with screws, bolts or nuts. While shim washers can be used in the same way, they can be slotted into threaded screws or axles to carry out their job.TolerancesBased on DIN125A standard, flat washers are produced with nominal dimensions with no tolerance values given. Our flat washers are supplied with the understanding that the thickness variance will range from 0 to 0.2mm. For example, an M3 flat washer will have thickness ranging from 0.4mm to 0.6mm, even in the same batch!Shim washers are produced to close tolerances, usually up to 0.2mm for ID and OD, and as small as +/-0.02mm for thickness. In short, shim washers are more precise than flat washers because they have to be. During gap alignment or leveling, minor differences in thickness and diameters must be taken into account for fear of misalignment. Available ThicknessFlat washers usually have a single thickness based on a given ID and OD. For example, an M3 flat washer with ID 3.2mm and OD 6mm will have thickness 0.4mm. If you are lucky (or not), you might find some with 0.5mm in the same batch. Not reassuring? Not to worry, being used for fastening, the thickness of flat washers is usually not a focal point.Product Description: Shim Ring (Also known as Shim Washer)Manufacturer: Iwata Manufacturing Co., LtdMaterials: Carbon Steel (SPCC), Brass and 304 Stainless SteelID: 10mmOD: 13mmThickness: 0.01mm to 1mm.Quantity Per Package: 10 pcsCountry of Origin: Japan

<h3>Shim Ring, Inner Diameter 10mm X Outer Diameter 13mm, Pack of 10 (Available in Brass, Carbon Steel and 304 Stainless Steel)</h3>
Shim Rings, also known as Shim Washers, are available in various thickness to align gaps and uneven surfaces. Shim washers look similar to flat washers, but are different in their usage and purpose.
Produced in Japan, these are made to extremely precise tolerances and are free from burrs. We are able to offer shim washers in different materials such as Brass, Carbon Steel (SPCC) and 304 stainless steel.
Use them for screws, axles, bearing faces and machine bases. Depending on the material, thickness variants range from 0.01mm to 1mm. Each package contains 10 pcs of the same thickness in the above given inner diameter and outer diameter sizes.
Shim washers and flat washers are inherently different in their purpose and tolerances. Here are three differences that set shim washers apart from flat washers.
Purpose And Usage
They serve a different purpose in life. While flat washers are used for fastening, load distribution and surface protection, shim washers are used for gap alignment. Flat washers are usually used together with screws, bolts or nuts. While shim washers can be used in the same way, they can be slotted into threaded screws or axles to carry out their job.
Tolerances
Based on DIN125A standard, flat washers are produced with nominal dimensions with no tolerance values given. Our flat washers are supplied with the understanding that the thickness variance will range from 0 to 0.2mm. For example, an M3 flat washer will have thickness ranging from 0.4mm to 0.6mm, even in the same batch!
Shim washers are produced to close tolerances, usually up to 0.2mm for ID and OD, and as small as +/-0.02mm for thickness. 
In short, shim washers are more precise than flat washers because they have to be. During gap alignment or leveling, minor differences in thickness and diameters must be taken into account for fear of misalignment. 
Available Thickness
Flat washers usually have a single thickness based on a given ID and OD. For example, an M3 flat washer with ID 3.2mm and OD 6mm will have thickness 0.4mm. If you are lucky (or not), you might find some with 0.5mm in the same batch. Not reassuring? Not to worry, being used for fastening, the thickness of flat washers is usually not a focal point.
Product Description: Shim Ring (Also known as Shim Washer)
Manufacturer: Iwata Manufacturing Co., Ltd
Materials: Carbon Steel (SPCC), Brass and 304 Stainless Steel
ID: 10mm
OD: 13mm
Thickness: 0.01mm to 1mm.
Quantity Per Package: 10 pcs
Country of Origin: Japan

Precision Brand

Ergomat

Southco

Others

DYMON

SCRUBS

IT Accessories

Machinery Accessories

Screw

Ball Bearings

Hooks & Eyes

Drill Bits & Drill Bit Sets

Rubber Seals

Other Tools

Hose Clamp

Leland

buyerIntroduction

Iwata Shim Ring, Inner Diameter 10mm X Outer Diameter 13mm, Pack of 10

iwata shim ring, inner diameter 10mm outer 13mm, pack 10 cincin iwata, dalam luar kemasan washers pek iwata/岩田 垫片环，内径 外径 13mm，10 个一包 岩田

iwata-shim-ring-inner-diameter-10mm-x-outer-diameter-13mm-pack-of-10

Carbon Steel ID 10mm x OD 13mm x 0.10mm PN RF010013010, Pack of 10 Pieces

Carbon Steel ID 10mm x OD 13mm x 0.15mm PN RF010013015, Pack of 10 Pieces

Carbon Steel ID 10mm x OD 13mm x 0.20mm PN RF010013020, Pack of 10 Pieces

Carbon Steel ID 10mm x OD 13mm x 0.30mm PN RF010013030, Pack of 10 Pieces

Carbon Steel ID 10mm x OD 13mm x 0.50mm PN RF010013050, Pack of 10 Pieces

Carbon Steel ID 10mm x OD 13mm x 1mm PN RF010013100, Pack of 10 Pieces

Brass ID 10mm x OD 13mm x 0.05mm PN RB010013005, Pack of 10 Pieces

Brass ID 10mm x OD 13mm x 0.10mm PN RB010013010, Pack of 10 Pieces

Brass ID 10mm x OD 13mm x 0.15mm PN RB010013015, Pack of 10 Pieces

Brass ID 10mm x OD 13mm x 0.20mm PN RB010013020, Pack of 10 Pieces

Brass ID 10mm x OD 13mm x 0.30mm PN RB010013030, Pack of 10 Pieces

Brass ID 10mm x OD 13mm x 0.50mm PN RB0010013050, Pack of 10 Pieces

Brass ID 10mm x OD 13mm x 1mm PN RB010013100, Pack of 10 Pieces

304 SST ID 10mm x OD 13mm x 0.01mm PN RS010013001, Pack of 10 Pieces

304 SST ID 10mm x OD 13mm x 0.02mm PN RS010013002, Pack of 10 Pieces

304 SST ID 10mm x OD 13mm x 0.03mm PN RS010013003, Pack of 10 Pieces

304 SST ID 10mm x OD 13mm x 0.05mm PN RS010013005, Pack of 10 Pieces

304 SST ID 10mm x OD 13mm x 0.10mm PN RS010013010, Pack of 10 Pieces

304 SST ID 10mm x OD 13mm x 0.15mm PN RS010013015, Pack of 10 Pieces

304 SST ID 10mm x OD 13mm x 0.20mm PN RS010013020, Pack of 10 Pieces

304 SST ID 10mm x OD 13mm x 0.30mm PN RS010013030, Pack of 10 Pieces

304 SST ID 10mm x OD 13mm x 0.50mm PN RS010013050, Pack of 10 Pieces

304 SST ID 10mm x OD 13mm x 1mm PN RS010013100, Pack of 10 Pieces

Material

Shim Ring, Inner Diameter 5mm X Outer Diameter 13mm, Pack of 10 (Available in Brass, Carbon Steel and 304 Stainless Steel)

<h3 class="md-block-header-three">Shim Ring, Inner Diameter 5mm X Outer Diameter 13mm, Pack of 10 (Available in Brass, Carbon Steel and 304 Stainless Steel)</h3>Shim Rings, also known as Shim Washers, are available in various thickness to align gaps and uneven surfaces. Shim washers look similar to flat washers, but are different in their usage and purpose.Produced in Japan, these are made to extremely precise tolerances and are free from burrs. We are able to offer shim washers in different materials such as Brass, Carbon Steel (SPCC) and 304 stainless steel.Use them for screws, axles, bearing faces and machine bases. Depending on the material, thickness variants range from 0.01mm to 1mm. Each package contains 10 pcs of the same thickness in the above given inner diameter and outer diameter sizes.Shim washers and flat washers are inherently different in their purpose and tolerances. Here are three differences that set shim washers apart from flat washers.Purpose And UsageThey serve a different purpose in life. While flat washers are used for fastening, load distribution and surface protection, shim washers are used for gap alignment. Flat washers are usually used together with screws, bolts or nuts. While shim washers can be used in the same way, they can be slotted into threaded screws or axles to carry out their job.TolerancesBased on DIN125A standard, flat washers are produced with nominal dimensions with no tolerance values given. Our flat washers are supplied with the understanding that the thickness variance will range from 0 to 0.2mm. For example, an M3 flat washer will have thickness ranging from 0.4mm to 0.6mm, even in the same batch!Shim washers are produced to close tolerances, usually up to 0.2mm for ID and OD, and as small as +/-0.02mm for thickness. In short, shim washers are more precise than flat washers because they have to be. During gap alignment or leveling, minor differences in thickness and diameters must be taken into account for fear of misalignment. Available ThicknessFlat washers usually have a single thickness based on a given ID and OD. For example, an M3 flat washer with ID 3.2mm and OD 6mm will have thickness 0.4mm. If you are lucky (or not), you might find some with 0.5mm in the same batch. Not reassuring? Not to worry, being used for fastening, the thickness of flat washers is usually not a focal point.Product Description: Shim Ring (Also known as Shim Washer)Manufacturer: Iwata Manufacturing Co., LtdMaterials: Carbon Steel (SPCC), Brass and 304 Stainless SteelID: 5mmOD: 13mmThickness: 0.01mm to 1mm.Quantity Per Package: 10 pcsCountry of Origin: Japan

<h3>Shim Ring, Inner Diameter 5mm X Outer Diameter 13mm, Pack of 10 (Available in Brass, Carbon Steel and 304 Stainless Steel)</h3>
Shim Rings, also known as Shim Washers, are available in various thickness to align gaps and uneven surfaces. Shim washers look similar to flat washers, but are different in their usage and purpose.
Produced in Japan, these are made to extremely precise tolerances and are free from burrs. We are able to offer shim washers in different materials such as Brass, Carbon Steel (SPCC) and 304 stainless steel.
Use them for screws, axles, bearing faces and machine bases. Depending on the material, thickness variants range from 0.01mm to 1mm. Each package contains 10 pcs of the same thickness in the above given inner diameter and outer diameter sizes.
Shim washers and flat washers are inherently different in their purpose and tolerances. Here are three differences that set shim washers apart from flat washers.
Purpose And Usage
They serve a different purpose in life. While flat washers are used for fastening, load distribution and surface protection, shim washers are used for gap alignment. Flat washers are usually used together with screws, bolts or nuts. While shim washers can be used in the same way, they can be slotted into threaded screws or axles to carry out their job.
Tolerances
Based on DIN125A standard, flat washers are produced with nominal dimensions with no tolerance values given. Our flat washers are supplied with the understanding that the thickness variance will range from 0 to 0.2mm. For example, an M3 flat washer will have thickness ranging from 0.4mm to 0.6mm, even in the same batch!
Shim washers are produced to close tolerances, usually up to 0.2mm for ID and OD, and as small as +/-0.02mm for thickness. 
In short, shim washers are more precise than flat washers because they have to be. During gap alignment or leveling, minor differences in thickness and diameters must be taken into account for fear of misalignment. 
Available Thickness
Flat washers usually have a single thickness based on a given ID and OD. For example, an M3 flat washer with ID 3.2mm and OD 6mm will have thickness 0.4mm. If you are lucky (or not), you might find some with 0.5mm in the same batch. Not reassuring? Not to worry, being used for fastening, the thickness of flat washers is usually not a focal point.
Product Description: Shim Ring (Also known as Shim Washer)
Manufacturer: Iwata Manufacturing Co., Ltd
Materials: Carbon Steel (SPCC), Brass and 304 Stainless Steel
ID: 5mm
OD: 13mm
Thickness: 0.01mm to 1mm.
Quantity Per Package: 10 pcs
Country of Origin: Japan

Iwata Shim Ring, Inner Diameter 5mm X Outer Diameter 13mm, Pack of 10

iwata shim ring, inner diameter 5mm outer 13mm, pack 10 cincin iwata, dalam luar kemasan buah washers pek iwata/岩田 垫片环，内径 外径 13mm，10 个一包 岩田

iwata-shim-ring-inner-diameter-5mm-x-outer-diameter-13mm-pack-of-10

Carbon Steel ID 5mm x OD 13mm x 0.10mm PN RF005013010, Pack of 10 Pieces

Carbon Steel ID 5mm x OD 13mm x 0.15mm PN RF005013015, Pack of 10 Pieces

Carbon Steel ID 5mm x OD 13mm x 0.20mm PN RF005013020, Pack of 10 Pieces

Carbon Steel ID 5mm x OD 13mm x 0.30mm PN RF005013030, Pack of 10 Pieces

Carbon Steel ID 5mm x OD 13mm x 0.50mm PN RF005013050, Pack of 10 Pieces

Carbon Steel ID 5mm x OD 13mm x 1mm PN RF005013100, Pack of 10 Pieces

Brass ID 5mm x OD 13mm x 0.05mm PN RB005013005, Pack of 10 Pieces

Brass ID 5mm x OD 13mm x 0.10mm PN RB005013010, Pack of 10 Pieces

Brass ID 5mm x OD 13mm x 0.15mm PN RB005013015, Pack of 10 Pieces

Brass ID 5mm x OD 13mm x 0.20mm PN RB005013020, Pack of 10 Pieces

Brass ID 5mm x OD 13mm x 0.30mm PN RB005013030, Pack of 10 Pieces

Brass ID 5mm x OD 13mm x 0.50mm PN RB005013050, Pack of 10 Pieces

Brass ID 5mm x OD 13mm x 1mm PN RB005013100, Pack of 10 Pieces

304 SST ID 5mm x OD 13mm x 0.01mm PN RS005013001, Pack of 10 Pieces

304 SST ID 5mm x OD 13mm x 0.02mm PN RS005013002, Pack of 10 Pieces

304 SST ID 5mm x OD 13mm x 0.03mm PN RS005013003, Pack of 10 Pieces

304 SST ID 5mm x OD 13mm x 0.05mm PN RS005013005, Pack of 10 Pieces

304 SST ID 5mm x OD 13mm x 0.10mm PN RS005013010, Pack of 10 Pieces

304 SST ID 5mm x OD 13mm x 0.15mm PN RS005013015, Pack of 10 Pieces

304 SST ID 5mm x OD 13mm x 0.20mm PN RS005013020, Pack of 10 Pieces

304 SST ID 5mm x OD 13mm x 0.30mm PN RS005013030, Pack of 10 Pieces

304 SST ID 5mm x OD 13mm x 0.50mm PN RS005013050, Pack of 10 Pieces

304 SST ID 5mm x OD 13mm x 1mm PN RS005013100, Pack of 10 Pieces

Shim Ring, Inner Diameter 8mm X Outer Diameter 13mm, Pack of 10 (Available in Brass, Carbon Steel and 304 Stainless Steel)

<h3 class="md-block-header-three">Shim Ring, Inner Diameter 8mm X Outer Diameter 13mm, Pack of 10 (Available in Brass, Carbon Steel and 304 Stainless Steel)</h3>Shim Rings, also known as Shim Washers, are available in various thickness to align gaps and uneven surfaces. Shim washers look similar to flat washers, but are different in their usage and purpose.Produced in Japan, these are made to extremely precise tolerances and are free from burrs. We are able to offer shim washers in different materials such as Brass, Carbon Steel (SPCC) and 304 stainless steel.Use them for screws, axles, bearing faces and machine bases. Depending on the material, thickness variants range from 0.01mm to 1mm. Each package contains 10 pcs of the same thickness in the above given inner diameter and outer diameter sizes.Shim washers and flat washers are inherently different in their purpose and tolerances. Here are three differences that set shim washers apart from flat washers.Purpose And UsageThey serve a different purpose in life. While flat washers are used for fastening, load distribution and surface protection, shim washers are used for gap alignment. Flat washers are usually used together with screws, bolts or nuts. While shim washers can be used in the same way, they can be slotted into threaded screws or axles to carry out their job.TolerancesBased on DIN125A standard, flat washers are produced with nominal dimensions with no tolerance values given. Our flat washers are supplied with the understanding that the thickness variance will range from 0 to 0.2mm. For example, an M3 flat washer will have thickness ranging from 0.4mm to 0.6mm, even in the same batch!Shim washers are produced to close tolerances, usually up to 0.2mm for ID and OD, and as small as +/-0.02mm for thickness. In short, shim washers are more precise than flat washers because they have to be. During gap alignment or leveling, minor differences in thickness and diameters must be taken into account for fear of misalignment. Available ThicknessFlat washers usually have a single thickness based on a given ID and OD. For example, an M3 flat washer with ID 3.2mm and OD 6mm will have thickness 0.4mm. If you are lucky (or not), you might find some with 0.5mm in the same batch. Not reassuring? Not to worry, being used for fastening, the thickness of flat washers is usually not a focal point.Product Description: Shim Ring (Also known as Shim Washer)Manufacturer: Iwata Manufacturing Co., LtdMaterials: Carbon Steel (SPCC), Brass and 304 Stainless SteelID: 8mmOD: 13mmThickness: 0.01mm to 1mm.Quantity Per Package: 10 pcsCountry of Origin: Japan

<h3>Shim Ring, Inner Diameter 8mm X Outer Diameter 13mm, Pack of 10 (Available in Brass, Carbon Steel and 304 Stainless Steel)</h3>
Shim Rings, also known as Shim Washers, are available in various thickness to align gaps and uneven surfaces. Shim washers look similar to flat washers, but are different in their usage and purpose.
Produced in Japan, these are made to extremely precise tolerances and are free from burrs. We are able to offer shim washers in different materials such as Brass, Carbon Steel (SPCC) and 304 stainless steel.
Use them for screws, axles, bearing faces and machine bases. Depending on the material, thickness variants range from 0.01mm to 1mm. Each package contains 10 pcs of the same thickness in the above given inner diameter and outer diameter sizes.
Shim washers and flat washers are inherently different in their purpose and tolerances. Here are three differences that set shim washers apart from flat washers.
Purpose And Usage
They serve a different purpose in life. While flat washers are used for fastening, load distribution and surface protection, shim washers are used for gap alignment. Flat washers are usually used together with screws, bolts or nuts. While shim washers can be used in the same way, they can be slotted into threaded screws or axles to carry out their job.
Tolerances
Based on DIN125A standard, flat washers are produced with nominal dimensions with no tolerance values given. Our flat washers are supplied with the understanding that the thickness variance will range from 0 to 0.2mm. For example, an M3 flat washer will have thickness ranging from 0.4mm to 0.6mm, even in the same batch!
Shim washers are produced to close tolerances, usually up to 0.2mm for ID and OD, and as small as +/-0.02mm for thickness. 
In short, shim washers are more precise than flat washers because they have to be. During gap alignment or leveling, minor differences in thickness and diameters must be taken into account for fear of misalignment. 
Available Thickness
Flat washers usually have a single thickness based on a given ID and OD. For example, an M3 flat washer with ID 3.2mm and OD 6mm will have thickness 0.4mm. If you are lucky (or not), you might find some with 0.5mm in the same batch. Not reassuring? Not to worry, being used for fastening, the thickness of flat washers is usually not a focal point.
Product Description: Shim Ring (Also known as Shim Washer)
Manufacturer: Iwata Manufacturing Co., Ltd
Materials: Carbon Steel (SPCC), Brass and 304 Stainless Steel
ID: 8mm
OD: 13mm
Thickness: 0.01mm to 1mm.
Quantity Per Package: 10 pcs
Country of Origin: Japan

Iwata Shim Ring, Inner Diameter 8mm X Outer Diameter 13mm, Pack of 10

iwata shim ring, inner diameter 8mm outer 13mm, pack 10 cincin iwata, dalam luar kemasan buah washers pek iwata/岩田 垫片环，内径 外径 13mm，10 个一包 岩田

iwata-shim-ring-inner-diameter-8mm-x-outer-diameter-13mm-pack-of-10

Carbon Steel ID 8mm x OD 13mm x 0.10mm PN RF008013010, Pack of 10 Pieces

Carbon Steel ID 8mm x OD 13mm x 0.15mm PN RF008013015, Pack of 10 Pieces

Carbon Steel ID 8mm x OD 13mm x 0.20mm PN RF008013020, Pack of 10 Pieces

Carbon Steel ID 8mm x OD 13mm x 0.30mm PN RF008013030, Pack of 10 Pieces

Carbon Steel ID 8mm x OD 13mm x 0.50mm PN RF008013050, Pack of 10 Pieces

Carbon Steel ID 8mm x OD 13mm x 1mm PN RF008013100, Pack of 10 Pieces

Brass ID 8mm x OD 13mm x 0.05mm PN RB008013005, Pack of 10 Pieces

Brass ID 8mm x OD 13mm x 0.10mm PN RB008013010, Pack of 10 Pieces

Brass ID 8mm x OD 13mm x 0.15mm PN RB008013015, Pack of 10 Pieces

Brass ID 8mm x OD 13mm x 0.20mm PN RB008013020, Pack of 10 Pieces

Brass ID 8mm x OD 13mm x 0.30mm PN RB008013030, Pack of 10 Pieces

Brass ID 8mm x OD 13mm x 0.50mm PN RB008013050, Pack of 10 Pieces

Brass ID 8mm x OD 13mm x 1mm PN RB008013100, Pack of 10 Pieces

304 SST ID 8mm x OD 13mm x 0.01mm PN RS008013001, Pack of 10 Pieces

304 SST ID 8mm x OD 13mm x 0.02mm PN RS008013002, Pack of 10 Pieces

304 SST ID 8mm x OD 13mm x 0.03mm PN RS008013003, Pack of 10 Pieces

304 SST ID 8mm x OD 13mm x 0.05mm PN RS008013005, Pack of 10 Pieces

304 SST ID 8mm x OD 13mm x 0.10mm PN RS008013010, Pack of 10 Pieces

304 SST ID 8mm x OD 13mm x 0.15mm PN RS008013015, Pack of 10 Pieces

304 SST ID 8mm x OD 13mm x 0.20mm PN RS008013020, Pack of 10 Pieces

304 SST ID 8mm x OD 13mm x 0.30mm PN RS008013030, Pack of 10 Pieces

304 SST ID 8mm x OD 13mm x 0.50mm PN RS008013050, Pack of 10 Pieces

304 SST ID 8mm x OD 13mm x 1mm PN RS008013100, Pack of 10 Pieces

Shim Ring, Inner Diameter 4mm X Outer Diameter 13mm, Pack of 10 (Available in Brass, Carbon Steel and 304 Stainless Steel)

<h3 class="md-block-header-three">Shim Ring, Inner Diameter 4mm X Outer Diameter 13mm, Pack of 10 (Available in Brass, Carbon Steel and 304 Stainless Steel)</h3>Shim Rings, also known as Shim Washers, are available in various thickness to align gaps and uneven surfaces. Shim washers look similar to flat washers, but are different in their usage and purpose.Produced in Japan, these are made to extremely precise tolerances and are free from burrs. We are able to offer shim washers in different materials such as Brass, Carbon Steel (SPCC) and 304 stainless steel.Use them for screws, axles, bearing faces and machine bases. Depending on the material, thickness variants range from 0.01mm to 1mm. Each package contains 10 pcs of the same thickness in the above given inner diameter and outer diameter sizes.Shim washers and flat washers are inherently different in their purpose and tolerances. Here are three differences that set shim washers apart from flat washers.Purpose And UsageThey serve a different purpose in life. While flat washers are used for fastening, load distribution and surface protection, shim washers are used for gap alignment. Flat washers are usually used together with screws, bolts or nuts. While shim washers can be used in the same way, they can be slotted into threaded screws or axles to carry out their job.TolerancesBased on DIN125A standard, flat washers are produced with nominal dimensions with no tolerance values given. Our flat washers are supplied with the understanding that the thickness variance will range from 0 to 0.2mm. For example, an M3 flat washer will have thickness ranging from 0.4mm to 0.6mm, even in the same batch!Shim washers are produced to close tolerances, usually up to 0.2mm for ID and OD, and as small as +/-0.02mm for thickness. In short, shim washers are more precise than flat washers because they have to be. During gap alignment or leveling, minor differences in thickness and diameters must be taken into account for fear of misalignment. Available ThicknessFlat washers usually have a single thickness based on a given ID and OD. For example, an M3 flat washer with ID 3.2mm and OD 6mm will have thickness 0.4mm. If you are lucky (or not), you might find some with 0.5mm in the same batch. Not reassuring? Not to worry, being used for fastening, the thickness of flat washers is usually not a focal point.Product Description: Shim Ring (Also known as Shim Washer)Manufacturer: Iwata Manufacturing Co., LtdMaterials: Carbon Steel (SPCC), Brass and 304 Stainless SteelID: 4mmOD: 13mmThickness: 0.01mm to 1mm.Quantity Per Package: 10 pcsCountry of Origin: Japan

<h3>Shim Ring, Inner Diameter 4mm X Outer Diameter 13mm, Pack of 10 (Available in Brass, Carbon Steel and 304 Stainless Steel)</h3>
Shim Rings, also known as Shim Washers, are available in various thickness to align gaps and uneven surfaces. Shim washers look similar to flat washers, but are different in their usage and purpose.
Produced in Japan, these are made to extremely precise tolerances and are free from burrs. We are able to offer shim washers in different materials such as Brass, Carbon Steel (SPCC) and 304 stainless steel.
Use them for screws, axles, bearing faces and machine bases. Depending on the material, thickness variants range from 0.01mm to 1mm. Each package contains 10 pcs of the same thickness in the above given inner diameter and outer diameter sizes.
Shim washers and flat washers are inherently different in their purpose and tolerances. Here are three differences that set shim washers apart from flat washers.
Purpose And Usage
They serve a different purpose in life. While flat washers are used for fastening, load distribution and surface protection, shim washers are used for gap alignment. Flat washers are usually used together with screws, bolts or nuts. While shim washers can be used in the same way, they can be slotted into threaded screws or axles to carry out their job.
Tolerances
Based on DIN125A standard, flat washers are produced with nominal dimensions with no tolerance values given. Our flat washers are supplied with the understanding that the thickness variance will range from 0 to 0.2mm. For example, an M3 flat washer will have thickness ranging from 0.4mm to 0.6mm, even in the same batch!
Shim washers are produced to close tolerances, usually up to 0.2mm for ID and OD, and as small as +/-0.02mm for thickness. 
In short, shim washers are more precise than flat washers because they have to be. During gap alignment or leveling, minor differences in thickness and diameters must be taken into account for fear of misalignment. 
Available Thickness
Flat washers usually have a single thickness based on a given ID and OD. For example, an M3 flat washer with ID 3.2mm and OD 6mm will have thickness 0.4mm. If you are lucky (or not), you might find some with 0.5mm in the same batch. Not reassuring? Not to worry, being used for fastening, the thickness of flat washers is usually not a focal point.
Product Description: Shim Ring (Also known as Shim Washer)
Manufacturer: Iwata Manufacturing Co., Ltd
Materials: Carbon Steel (SPCC), Brass and 304 Stainless Steel
ID: 4mm
OD: 13mm
Thickness: 0.01mm to 1mm.
Quantity Per Package: 10 pcs
Country of Origin: Japan

Iwata Shim Ring, Inner Diameter 4mm X Outer Diameter 13mm, Pack of 10

iwata shim ring, inner diameter 4mm outer 13mm, pack 10 cincin iwata, dalam luar kemasan isi washers pek iwata/岩田 垫片环，内径 外径 13mm，10 个一包 岩田

iwata-shim-ring-inner-diameter-4mm-x-outer-diameter-13mm-pack-of-10

Carbon Steel ID 4mm x OD 13mm x 0.10mm PN RF004013010, Pack of 10 Pieces

Carbon Steel ID 4mm x OD 13mm x 0.15mm PN RF004013015, Pack of 10 Pieces

Carbon Steel ID 4mm x OD 13mm x 0.20mm PN RF004013020, Pack of 10 Pieces

Carbon Steel ID 4mm x OD 13mm x 0.30mm PN RF004013030, Pack of 10 Pieces

Carbon Steel ID 4mm x OD 13mm x 0.50mm PN RF004013050, Pack of 10 Pieces

Carbon Steel ID 4mm x OD 13mm x 1mm PN RF004013100, Pack of 10 Pieces

Brass ID 4mm x OD 13mm x 0.05mm PN RB004013005, Pack of 10 Pieces

Brass ID 4mm x OD 13mm x 0.10mm PN RB004013010, Pack of 10 Pieces

Brass ID 4mm x OD 13mm x 0.15mm PN RB004013015, Pack of 10 Pieces

Brass ID 4mm x OD 13mm x 0.20mm PN RB004013020, Pack of 10 Pieces

Brass ID 4mm x OD 13mm x 0.30mm PN RB004013030, Pack of 10 Pieces

Brass ID 4mm x OD 13mm x 0.50mm PN RB004013050, Pack of 10 Pieces

Brass ID 4mm x OD 13mm x 1mm PN RB004013100, Pack of 10 Pieces

304 SST ID 4mm x OD 13mm x 0.01mm PN RS004013001, Pack of 10 Pieces

304 SST ID 4mm x OD 13mm x 0.02mm PN RS004013002, Pack of 10 Pieces

304 SST ID 4mm x OD 13mm x 0.03mm PN RS004013003, Pack of 10 Pieces

304 SST ID 4mm x OD 13mm x 0.05mm PN RS004013005, Pack of 10 Pieces

304 SST ID 4mm x OD 13mm x 0.10mm PN RS004013010, Pack of 10 Pieces

304 SST ID 4mm x OD 13mm x 0.15mm PN RS004013015, Pack of 10 Pieces

304 SST ID 4mm x OD 13mm x 0.20mm PN RS004013020, Pack of 10 Pieces

304 SST ID 4mm x OD 13mm x 0.30mm PN RS004013030, Pack of 10 Pieces

304 SST ID 4mm x OD 13mm x 0.50mm PN RS004013050, Pack of 10 Pieces

304 SST ID 4mm x OD 13mm x 1mm PN RS004013100, Pack of 10 Pieces

Shim Ring, Inner Diameter 6mm X Outer Diameter 13mm, Pack of 10 (Available in Brass, Carbon Steel and 304 Stainless Steel)

<h3 class="md-block-header-three">Shim Ring, Inner Diameter 6mm X Outer Diameter 13mm, Pack of 10 (Available in Brass, Carbon Steel and 304 Stainless Steel)</h3>Shim Rings, also known as Shim Washers, are available in various thickness to align gaps and uneven surfaces. Shim washers look similar to flat washers, but are different in their usage and purpose.Produced in Japan, these are made to extremely precise tolerances and are free from burrs. We are able to offer shim washers in different materials such as Brass, Carbon Steel (SPCC) and 304 stainless steel.Use them for screws, axles, bearing faces and machine bases. Depending on the material, thickness variants range from 0.01mm to 1mm. Each package contains 10 pcs of the same thickness in the above given inner diameter and outer diameter sizes.Shim washers and flat washers are inherently different in their purpose and tolerances. Here are three differences that set shim washers apart from flat washers.Purpose And UsageThey serve a different purpose in life. While flat washers are used for fastening, load distribution and surface protection, shim washers are used for gap alignment. Flat washers are usually used together with screws, bolts or nuts. While shim washers can be used in the same way, they can be slotted into threaded screws or axles to carry out their job.TolerancesBased on DIN125A standard, flat washers are produced with nominal dimensions with no tolerance values given. Our flat washers are supplied with the understanding that the thickness variance will range from 0 to 0.2mm. For example, an M3 flat washer will have thickness ranging from 0.4mm to 0.6mm, even in the same batch!Shim washers are produced to close tolerances, usually up to 0.2mm for ID and OD, and as small as +/-0.02mm for thickness. In short, shim washers are more precise than flat washers because they have to be. During gap alignment or leveling, minor differences in thickness and diameters must be taken into account for fear of misalignment. Available ThicknessFlat washers usually have a single thickness based on a given ID and OD. For example, an M3 flat washer with ID 3.2mm and OD 6mm will have thickness 0.4mm. If you are lucky (or not), you might find some with 0.5mm in the same batch. Not reassuring? Not to worry, being used for fastening, the thickness of flat washers is usually not a focal point.Product Description: Shim Ring (Also known as Shim Washer)Manufacturer: Iwata Manufacturing Co., LtdMaterials: Carbon Steel (SPCC), Brass and 304 Stainless SteelID: 6mmOD: 13mmThickness: 0.01mm to 1mm.Quantity Per Package: 10 pcsCountry of Origin: Japan

<h3>Shim Ring, Inner Diameter 6mm X Outer Diameter 13mm, Pack of 10 (Available in Brass, Carbon Steel and 304 Stainless Steel)</h3>
Shim Rings, also known as Shim Washers, are available in various thickness to align gaps and uneven surfaces. Shim washers look similar to flat washers, but are different in their usage and purpose.
Produced in Japan, these are made to extremely precise tolerances and are free from burrs. We are able to offer shim washers in different materials such as Brass, Carbon Steel (SPCC) and 304 stainless steel.
Use them for screws, axles, bearing faces and machine bases. Depending on the material, thickness variants range from 0.01mm to 1mm. Each package contains 10 pcs of the same thickness in the above given inner diameter and outer diameter sizes.
Shim washers and flat washers are inherently different in their purpose and tolerances. Here are three differences that set shim washers apart from flat washers.
Purpose And Usage
They serve a different purpose in life. While flat washers are used for fastening, load distribution and surface protection, shim washers are used for gap alignment. Flat washers are usually used together with screws, bolts or nuts. While shim washers can be used in the same way, they can be slotted into threaded screws or axles to carry out their job.
Tolerances
Based on DIN125A standard, flat washers are produced with nominal dimensions with no tolerance values given. Our flat washers are supplied with the understanding that the thickness variance will range from 0 to 0.2mm. For example, an M3 flat washer will have thickness ranging from 0.4mm to 0.6mm, even in the same batch!
Shim washers are produced to close tolerances, usually up to 0.2mm for ID and OD, and as small as +/-0.02mm for thickness. 
In short, shim washers are more precise than flat washers because they have to be. During gap alignment or leveling, minor differences in thickness and diameters must be taken into account for fear of misalignment. 
Available Thickness
Flat washers usually have a single thickness based on a given ID and OD. For example, an M3 flat washer with ID 3.2mm and OD 6mm will have thickness 0.4mm. If you are lucky (or not), you might find some with 0.5mm in the same batch. Not reassuring? Not to worry, being used for fastening, the thickness of flat washers is usually not a focal point.
Product Description: Shim Ring (Also known as Shim Washer)
Manufacturer: Iwata Manufacturing Co., Ltd
Materials: Carbon Steel (SPCC), Brass and 304 Stainless Steel
ID: 6mm
OD: 13mm
Thickness: 0.01mm to 1mm.
Quantity Per Package: 10 pcs
Country of Origin: Japan

Iwata Shim Ring, Inner Diameter 6mm X Outer Diameter 13mm, Pack of 10

iwata shim ring, inner diameter 6mm outer 13mm, pack 10 cincin iwata, dalam luar kemasan buah washers pek iwata/岩田 垫片环，内径 外径 13mm，10 个一包 岩田

iwata-shim-ring-inner-diameter-6mm-x-outer-diameter-13mm-pack-of-10

Carbon Steel ID 6mm x OD 13mm x 0.10mm PN RF006013010, Pack of 10 Pieces

Carbon Steel ID 6mm x OD 13mm x 0.15mm PN RF006013015, Pack of 10 Pieces

Carbon Steel ID 6mm x OD 13mm x 0.20mm PN RF006013020, Pack of 10 Pieces

Carbon Steel ID 6mm x OD 13mm x 0.30mm PN RF006013030, Pack of 10 Pieces

Carbon Steel ID 6mm x OD 13mm x 0.50mm PN RF006013050, Pack of 10 Pieces

Carbon Steel ID 6mm x OD 13mm x 1mm PN RF006013100, Pack of 10 Pieces

Brass ID 6mm x OD 13mm x 0.05mm PN RB006013005, Pack of 10 Pieces

Brass ID 6mm x OD 13mm x 0.10mm PN RB006013010, Pack of 10 Pieces

Brass ID 6mm x OD 13mm x 0.15mm PN RB006013015, Pack of 10 Pieces

Brass ID 6mm x OD 13mm x 0.20mm PN RB006013020, Pack of 10 Pieces

Brass ID 6mm x OD 13mm x 0.30mm PN RB006013030, Pack of 10 Pieces

Brass ID 6mm x OD 13mm x 0.50mm PN RB006013050, Pack of 10 Pieces

Brass ID 6mm x OD 13mm x 1mm PN RB006013100, Pack of 10 Pieces

304 SST ID 6mm x OD 13mm x 0.01mm PN RS006013001, Pack of 10 Pieces

304 SST ID 6mm x OD 13mm x 0.02mm PN RS006013002, Pack of 10 Pieces

304 SST ID 6mm x OD 13mm x 0.03mm PN RS006013003, Pack of 10 Pieces

304 SST ID 6mm x OD 13mm x 0.05mm PN RS006013005, Pack of 10 Pieces

304 SST ID 6mm x OD 13mm x 0.10mm PN RS006013010, Pack of 10 Pieces

304 SST ID 6mm x OD 13mm x 0.15mm PN RS006013015, Pack of 10 Pieces

304 SST ID 6mm x OD 13mm x 0.20mm PN RS006013020, Pack of 10 Pieces

304 SST ID 6mm x OD 13mm x 0.30mm PN RS006013030, Pack of 10 Pieces

304 SST ID 6mm x OD 13mm x 0.50mm PN RS006013050, Pack of 10 Pieces

304 SST ID 6mm x OD 13mm x 1mm PN RS006013100, Pack of 10 Pieces

Shim Ring, Inner Diameter 13mm X Outer Diameter 19mm, Pack of 10 (Available in Brass, Carbon Steel and 304 Stainless Steel)

<h3 class="md-block-header-three">Shim Ring, Inner Diameter 13mm X Outer Diameter 19mm, Pack of 10 (Available in Brass, Carbon Steel and 304 Stainless Steel)</h3>Shim Rings, also known as Shim Washers, are available in various thickness to align gaps and uneven surfaces. Shim washers look similar to flat washers, but are different in their usage and purpose.Produced in Japan, these are made to extremely precise tolerances and are free from burrs. We are able to offer shim washers in different materials such as Brass, Carbon Steel (SPCC) and 304 stainless steel.Use them for screws, axles, bearing faces and machine bases. Depending on the material, thickness variants range from 0.01mm to 1mm. Each package contains 10 pcs of the same thickness in the above given inner diameter and outer diameter sizes.Shim washers and flat washers are inherently different in their purpose and tolerances. Here are three differences that set shim washers apart from flat washers.Purpose And UsageThey serve a different purpose in life. While flat washers are used for fastening, load distribution and surface protection, shim washers are used for gap alignment. Flat washers are usually used together with screws, bolts or nuts. While shim washers can be used in the same way, they can be slotted into threaded screws or axles to carry out their job.TolerancesBased on DIN125A standard, flat washers are produced with nominal dimensions with no tolerance values given. Our flat washers are supplied with the understanding that the thickness variance will range from 0 to 0.2mm. For example, an M3 flat washer will have thickness ranging from 0.4mm to 0.6mm, even in the same batch!Shim washers are produced to close tolerances, usually up to 0.2mm for ID and OD, and as small as +/-0.02mm for thickness. In short, shim washers are more precise than flat washers because they have to be. During gap alignment or leveling, minor differences in thickness and diameters must be taken into account for fear of misalignment. Available ThicknessFlat washers usually have a single thickness based on a given ID and OD. For example, an M3 flat washer with ID 3.2mm and OD 6mm will have thickness 0.4mm. If you are lucky (or not), you might find some with 0.5mm in the same batch. Not reassuring? Not to worry, being used for fastening, the thickness of flat washers is usually not a focal point.Product Description: Shim Ring (Also known as Shim Washer)Manufacturer: Iwata Manufacturing Co., LtdMaterials: Carbon Steel (SPCC), Brass and 304 Stainless SteelID: 13mmOD: 19mmThickness: 0.01mm to 1mm.Quantity Per Package: 10 pcsCountry of Origin: Japan

<h3>Shim Ring, Inner Diameter 13mm X Outer Diameter 19mm, Pack of 10 (Available in Brass, Carbon Steel and 304 Stainless Steel)</h3>
Shim Rings, also known as Shim Washers, are available in various thickness to align gaps and uneven surfaces. Shim washers look similar to flat washers, but are different in their usage and purpose.
Produced in Japan, these are made to extremely precise tolerances and are free from burrs. We are able to offer shim washers in different materials such as Brass, Carbon Steel (SPCC) and 304 stainless steel.
Use them for screws, axles, bearing faces and machine bases. Depending on the material, thickness variants range from 0.01mm to 1mm. Each package contains 10 pcs of the same thickness in the above given inner diameter and outer diameter sizes.
Shim washers and flat washers are inherently different in their purpose and tolerances. Here are three differences that set shim washers apart from flat washers.
Purpose And Usage
They serve a different purpose in life. While flat washers are used for fastening, load distribution and surface protection, shim washers are used for gap alignment. Flat washers are usually used together with screws, bolts or nuts. While shim washers can be used in the same way, they can be slotted into threaded screws or axles to carry out their job.
Tolerances
Based on DIN125A standard, flat washers are produced with nominal dimensions with no tolerance values given. Our flat washers are supplied with the understanding that the thickness variance will range from 0 to 0.2mm. For example, an M3 flat washer will have thickness ranging from 0.4mm to 0.6mm, even in the same batch!
Shim washers are produced to close tolerances, usually up to 0.2mm for ID and OD, and as small as +/-0.02mm for thickness. 
In short, shim washers are more precise than flat washers because they have to be. During gap alignment or leveling, minor differences in thickness and diameters must be taken into account for fear of misalignment. 
Available Thickness
Flat washers usually have a single thickness based on a given ID and OD. For example, an M3 flat washer with ID 3.2mm and OD 6mm will have thickness 0.4mm. If you are lucky (or not), you might find some with 0.5mm in the same batch. Not reassuring? Not to worry, being used for fastening, the thickness of flat washers is usually not a focal point.
Product Description: Shim Ring (Also known as Shim Washer)
Manufacturer: Iwata Manufacturing Co., Ltd
Materials: Carbon Steel (SPCC), Brass and 304 Stainless Steel
ID: 13mm
OD: 19mm
Thickness: 0.01mm to 1mm.
Quantity Per Package: 10 pcs
Country of Origin: Japan

Iwata Shim Ring, Inner Diameter 13mm X Outer Diameter 19mm, Pack of 10

iwata shim ring, inner diameter 13mm outer 19mm, pack 10 cincin iwata, dalam luar kemasan buah washers pek iwata/岩田 垫片环，内径 13 毫米 外径 19 毫米，10 个一包 岩田

iwata-shim-ring-inner-diameter-13mm-x-outer-diameter-19mm-pack-of-10

Carbon Steel ID 13mm x OD 19mm x 0.10mm PN RF013019010, Pack of 10 Pieces

Carbon Steel ID 13mm x OD 19mm x 0.15mm PN RF013019015, Pack of 10 Pieces

Carbon Steel ID 13mm x OD 19mm x 0.20mm PN RF013019020, Pack of 10 Pieces

Carbon Steel ID 13mm x OD 19mm x 0.30mm PN RF013019030, Pack of 10 Pieces

Carbon Steel ID 13mm x OD 19mm x 0.50mm PN RF013019050, Pack of 10 Pieces

Carbon Steel ID 13mm x OD 19mm x 1mm PN RF013019100, Pack of 10 Pieces

Brass ID 13mm x OD 19mm x 0.05mm PN RB013019005, Pack of 10 Pieces

Brass ID 13mm x OD 19mm x 0.10mm PN RB013019010, Pack of 10 Pieces

Brass ID 13mm x OD 19mm x 0.15mm PN RB013019015, Pack of 10 Pieces