Iwata

Kyouiku Gear

Mechanical Parts

mechanical-parts

Spur Gears

spur-gears

Fasteners

fasteners

Washers

washers

Shim Ring, Inner Diameter 5mm X Outer Diameter 13mm, Pack of 10 (Available in Brass, Carbon Steel and 304 Stainless Steel)

Shim Rings, also known as Shim Washers, are available in various thickness to align gaps and uneven surfaces. Shim washers look similar to flat washers, but are different in their usage and purpose.

Produced in Japan, these are made to extremely precise tolerances and are free from burrs. We are able to offer shim washers in different materials such as Brass, Carbon Steel (SPCC) and 304 stainless steel.

Use them for screws, axles, bearing faces and machine bases. Depending on the material, thickness variants range from 0.01mm to 1mm. Each package contains 10 pcs of the same thickness in the above given inner diameter and outer diameter sizes.

Shim washers and flat washers are inherently different in their purpose and tolerances. Here are three differences that set shim washers apart from flat washers.

They serve a different purpose in life. While flat washers are used for fastening, load distribution and surface protection, shim washers are used for gap alignment. Flat washers are usually used together with screws, bolts or nuts. While shim washers can be used in the same way, they can be slotted into threaded screws or axles to carry out their job.

Based on DIN125A standard, flat washers are produced with nominal dimensions with no tolerance values given. Our flat washers are supplied with the understanding that the thickness variance will range from 0 to 0.2mm. For example, an M3 flat washer will have thickness ranging from 0.4mm to 0.6mm, even in the same batch!

Shim washers are produced to close tolerances, usually up to 0.2mm for ID and OD, and as small as +/-0.02mm for thickness. 

In short, shim washers are more precise than flat washers because they have to be. During gap alignment or leveling, minor differences in thickness and diameters must be taken into account for fear of misalignment. 

Flat washers usually have a single thickness based on a given ID and OD. For example, an M3 flat washer with ID 3.2mm and OD 6mm will have thickness 0.4mm. If you are lucky (or not), you might find some with 0.5mm in the same batch. Not reassuring? Not to worry, being used for fastening, the thickness of flat washers is usually not a focal point.

Product Description: Shim Ring (Also known as Shim Washer)

Manufacturer: Iwata Manufacturing Co., Ltd

Materials: Carbon Steel (SPCC), Brass and 304 Stainless Steel

<h3 class="md-block-header-three">Shim Ring, Inner Diameter 5mm X Outer Diameter 13mm, Pack of 10 (Available in Brass, Carbon Steel and 304 Stainless Steel)</h3>Shim Rings, also known as Shim Washers, are available in various thickness to align gaps and uneven surfaces. Shim washers look similar to flat washers, but are different in their usage and purpose.Produced in Japan, these are made to extremely precise tolerances and are free from burrs. We are able to offer shim washers in different materials such as Brass, Carbon Steel (SPCC) and 304 stainless steel.Use them for screws, axles, bearing faces and machine bases. Depending on the material, thickness variants range from 0.01mm to 1mm. Each package contains 10 pcs of the same thickness in the above given inner diameter and outer diameter sizes.Shim washers and flat washers are inherently different in their purpose and tolerances. Here are three differences that set shim washers apart from flat washers.Purpose And UsageThey serve a different purpose in life. While flat washers are used for fastening, load distribution and surface protection, shim washers are used for gap alignment. Flat washers are usually used together with screws, bolts or nuts. While shim washers can be used in the same way, they can be slotted into threaded screws or axles to carry out their job.TolerancesBased on DIN125A standard, flat washers are produced with nominal dimensions with no tolerance values given. Our flat washers are supplied with the understanding that the thickness variance will range from 0 to 0.2mm. For example, an M3 flat washer will have thickness ranging from 0.4mm to 0.6mm, even in the same batch!Shim washers are produced to close tolerances, usually up to 0.2mm for ID and OD, and as small as +/-0.02mm for thickness. In short, shim washers are more precise than flat washers because they have to be. During gap alignment or leveling, minor differences in thickness and diameters must be taken into account for fear of misalignment. Available ThicknessFlat washers usually have a single thickness based on a given ID and OD. For example, an M3 flat washer with ID 3.2mm and OD 6mm will have thickness 0.4mm. If you are lucky (or not), you might find some with 0.5mm in the same batch. Not reassuring? Not to worry, being used for fastening, the thickness of flat washers is usually not a focal point.Product Description: Shim Ring (Also known as Shim Washer)Manufacturer: Iwata Manufacturing Co., LtdMaterials: Carbon Steel (SPCC), Brass and 304 Stainless SteelID: 5mmOD: 13mmThickness: 0.01mm to 1mm.Quantity Per Package: 10 pcsCountry of Origin: Japan

<h3>Shim Ring, Inner Diameter 5mm X Outer Diameter 13mm, Pack of 10 (Available in Brass, Carbon Steel and 304 Stainless Steel)</h3>
Shim Rings, also known as Shim Washers, are available in various thickness to align gaps and uneven surfaces. Shim washers look similar to flat washers, but are different in their usage and purpose.
Produced in Japan, these are made to extremely precise tolerances and are free from burrs. We are able to offer shim washers in different materials such as Brass, Carbon Steel (SPCC) and 304 stainless steel.
Use them for screws, axles, bearing faces and machine bases. Depending on the material, thickness variants range from 0.01mm to 1mm. Each package contains 10 pcs of the same thickness in the above given inner diameter and outer diameter sizes.
Shim washers and flat washers are inherently different in their purpose and tolerances. Here are three differences that set shim washers apart from flat washers.
Purpose And Usage
They serve a different purpose in life. While flat washers are used for fastening, load distribution and surface protection, shim washers are used for gap alignment. Flat washers are usually used together with screws, bolts or nuts. While shim washers can be used in the same way, they can be slotted into threaded screws or axles to carry out their job.
Tolerances
Based on DIN125A standard, flat washers are produced with nominal dimensions with no tolerance values given. Our flat washers are supplied with the understanding that the thickness variance will range from 0 to 0.2mm. For example, an M3 flat washer will have thickness ranging from 0.4mm to 0.6mm, even in the same batch!
Shim washers are produced to close tolerances, usually up to 0.2mm for ID and OD, and as small as +/-0.02mm for thickness. 
In short, shim washers are more precise than flat washers because they have to be. During gap alignment or leveling, minor differences in thickness and diameters must be taken into account for fear of misalignment. 
Available Thickness
Flat washers usually have a single thickness based on a given ID and OD. For example, an M3 flat washer with ID 3.2mm and OD 6mm will have thickness 0.4mm. If you are lucky (or not), you might find some with 0.5mm in the same batch. Not reassuring? Not to worry, being used for fastening, the thickness of flat washers is usually not a focal point.
Product Description: Shim Ring (Also known as Shim Washer)
Manufacturer: Iwata Manufacturing Co., Ltd
Materials: Carbon Steel (SPCC), Brass and 304 Stainless Steel
ID: 5mm
OD: 13mm
Thickness: 0.01mm to 1mm.
Quantity Per Package: 10 pcs
Country of Origin: Japan

Precision Brand

Ergomat

Southco

Others

DYMON

SCRUBS

IT Accessories

Machinery Accessories

Screw

Ball Bearings

Painting Tools

Hooks & Eyes

Drill Bits & Drill Bit Sets

Rubber Seals

Other Tools

Hose Clamp

Leland

buyerIntroduction

Iwata Shim Ring, Inner Diameter 5mm X Outer Diameter 13mm, Pack of 10

iwata shim ring, inner diameter 5mm outer 13mm, pack 10 cincin iwata, dalam luar kemasan buah washers pek iwata/岩田 垫片环，内径 外径 13mm，10 个一包 岩田

iwata-shim-ring-inner-diameter-5mm-x-outer-diameter-13mm-pack-of-10

Carbon Steel ID 5mm x OD 13mm x 0.10mm PN RF005013010, Pack of 10 Pieces

Carbon Steel ID 5mm x OD 13mm x 0.15mm PN RF005013015, Pack of 10 Pieces

Carbon Steel ID 5mm x OD 13mm x 0.20mm PN RF005013020, Pack of 10 Pieces

Carbon Steel ID 5mm x OD 13mm x 0.30mm PN RF005013030, Pack of 10 Pieces

Carbon Steel ID 5mm x OD 13mm x 0.50mm PN RF005013050, Pack of 10 Pieces

Carbon Steel ID 5mm x OD 13mm x 1mm PN RF005013100, Pack of 10 Pieces

Brass ID 5mm x OD 13mm x 0.05mm PN RB005013005, Pack of 10 Pieces

Brass ID 5mm x OD 13mm x 0.10mm PN RB005013010, Pack of 10 Pieces

Brass ID 5mm x OD 13mm x 0.15mm PN RB005013015, Pack of 10 Pieces

Brass ID 5mm x OD 13mm x 0.20mm PN RB005013020, Pack of 10 Pieces

Brass ID 5mm x OD 13mm x 0.30mm PN RB005013030, Pack of 10 Pieces

Brass ID 5mm x OD 13mm x 0.50mm PN RB005013050, Pack of 10 Pieces

Brass ID 5mm x OD 13mm x 1mm PN RB005013100, Pack of 10 Pieces

304 SST ID 5mm x OD 13mm x 0.01mm PN RS005013001, Pack of 10 Pieces

304 SST ID 5mm x OD 13mm x 0.02mm PN RS005013002, Pack of 10 Pieces

304 SST ID 5mm x OD 13mm x 0.03mm PN RS005013003, Pack of 10 Pieces

304 SST ID 5mm x OD 13mm x 0.05mm PN RS005013005, Pack of 10 Pieces

304 SST ID 5mm x OD 13mm x 0.10mm PN RS005013010, Pack of 10 Pieces

304 SST ID 5mm x OD 13mm x 0.15mm PN RS005013015, Pack of 10 Pieces

304 SST ID 5mm x OD 13mm x 0.20mm PN RS005013020, Pack of 10 Pieces

304 SST ID 5mm x OD 13mm x 0.30mm PN RS005013030, Pack of 10 Pieces

304 SST ID 5mm x OD 13mm x 0.50mm PN RS005013050, Pack of 10 Pieces

304 SST ID 5mm x OD 13mm x 1mm PN RS005013100, Pack of 10 Pieces

Material

Kyouiku Gear (KG), S50SU24K+0805, Spur Gear, Module 0.5, SUS304, 24 teeth, 8mm face width, 13mm OD, 5mm bore dia.

Kyouiku Gear (KG),&nbsp;
S50SU24K+0805,&nbsp;
Spur Gear,&nbsp;
Module 0.5,&nbsp;
SUS304,&nbsp;
24 teeth,&nbsp;
8mm face width,&nbsp;
13mm OD,&nbsp;
5mm bore dia.

datasheet S50SU24K+0805

Mitre & Bevel Gears

Worm & Pinion Gears

Sprockets

Aw Kai Ren (Johnny)

Kyouiku Gear (kg), S50SU24K+0805, Spur Gear, Module 0.5, SUS304, 24 Teeth, 8mm Face Width, 13mm Od, 5mm Bore Dia

kyouiku gear (kg), s50su24k+0805, spur gear, module 0.5, sus304, 24 teeth, 8mm face width, 13mm od, 5mm bore dia modul 0,5, gigi, lebar muka 8mm, od 13mm, diameter lubang gears spur, bor gear/机械齿轮 (kg)，s50su24k+0805，正齿轮，模数 0.5，sus304，24 齿，8mm 面宽，13mm 外径，5mm 内径 机械齿轮