Apex

BOXO

ELORA

FORCE

Ingco

Iwata

Kyouiku Gear

Nichifu

RS Pro

Mechanical Parts

mechanical-parts

Ball Bearings

ball-bearings

Fasteners

fasteners

Bolts

bolts

Power Tools

power-tools

Drill Bits & Drill Bit Sets

drill-bits-drill-bit-sets

Eye Bolts

eye-bolts

Spanners & Sockets

spanners-sockets

Impact Sockets

impact-sockets

Electricals

electricals

Nuts

nuts

O Ring

o-ring

Painting Materials

painting-materials

Painting Tools

painting-tools

Rubber Seals

rubber-seals

Socket Accessories

socket-accessories

Socket Sets

socket-sets

Sockets

sockets

Spur Gears

spur-gears

Washers

washers

O Ring | Id 13mm | Thickness 1.5mm Viton 75 Shore

O-Rings and rubber seals are generally used for:

Applications that require resistance to OIL 

Applications that are required to work in low temperatures (-0°C) 

High performance Fuel systems that requires strictly no leakage

O-rings need to be installed properly for a perfect fit and sealing. It is important that you install the O-ring in a prescribed manner to ensure your application continues to function properly. You will also ensure you increase the life of the application.

The process of installing an O-ring into a male gland is an intricate affair that should be carefully undertaken. Glide it along the shaft so as it reaches the gland. At that point, it should easily snap into place. Simple as it might sound, a number of steps will ensure that the O-ring doesn’t get damaged.

If you want to install an O-ring correctly and within a short time, here are steps to follow:

Covering 	and lubricating the threading of the shaft 

The threading of the shaft has the potential of tearing the rubber seal. Cover the threads using a masking tape and then lubricate them to allow for easy passage of the O-ring. The aim is to have the O-ring slide through without getting torn.

That’s a tip that will save you the stress of a torn O-ring. In fact, running the O-ring over jagged or sharp objects could get it torn. You may not be able to notice some of these tears. That’s why you should ensure you prevent them from occurring in the first place.

You will have to stretch the O-ring over the shaft. Ensure you do it evenly. Pulling from one side is a no-no. If anything, you should stretch the O-ring as little as possible. You will not just get a tighter grip but added security too.

Instead of rolling the O-ring down the shaft, slide it. If you spiral wind or roll an O-ring, it cannot be properly installed. It will also not function optimally and can even end up being damaged. If you have a lubricant, apply it on the O-ring and you will keep it rolling.

Place the female component in a manner that allows its radius to go around the corner. This should be done when you are finalizing the installation process. Ensure the lead of this component is inside the chamfer. This is how you will be able to guarantee the safety of the O-ring.

For O-rings to perform optimally, they have to be properly installed. It doesn’t just provide secure sealing but also increases the service life of the component together with the application. Don’t compromise on this process.

<h3 class="md-block-header-three">O Ring | Id 13mm | Thickness 1.5mm Viton 75 Shore</h3><h3 class="md-block-header-three"><u class="md-inline-underline"><strong class="md-inline-bold">Primary Usage</strong></u></h3><p class="md-block-unstyled">O-Rings and rubber seals are generally used for:</p><ul class="md-block-unordered-list-item"><li>Applications that require resistance to OIL </li><li>Applications that are required to work in low temperatures (-0°C) </li><li>High performance Fuel systems that requires strictly no leakage</li><ul class="md-block-unordered-list-item"><li>Aircrafts </li><li>Marine Ships </li><li>F1 Cars</li></ul><li>General Industrial Use   </li></ul><p class="md-block-unstyled"><u class="md-inline-underline"><strong class="md-inline-bold">Tips for installation of an O-ring</strong></u></p><p class="md-block-unstyled">O-rings need to be installed properly for a perfect fit and sealing. It is important that you install the O-ring in a prescribed manner to ensure your application continues to function properly. You will also ensure you increase the life of the application.</p><p class="md-block-unstyled"><u class="md-inline-underline"><strong class="md-inline-bold">So how do you install an O-ring?</strong></u></p><p class="md-block-unstyled">The process of installing an O-ring into a male gland is an intricate affair that should be carefully undertaken. Glide it along the shaft so as it reaches the gland. At that point, it should easily snap into place. Simple as it might sound, a number of steps will ensure that the O-ring doesn’t get damaged.</p><p class="md-block-unstyled">If you want to install an O-ring correctly and within a short time, here are steps to follow:</p><ul class="md-block-unordered-list-item"><li>Covering 	and lubricating the threading of the shaft </li></ul><p class="md-block-unstyled">The threading of the shaft has the potential of tearing the rubber seal. Cover the threads using a masking tape and then lubricate them to allow for easy passage of the O-ring. The aim is to have the O-ring slide through without getting torn.</p><ul class="md-block-unordered-list-item"><li>Don’t force it over sharp corners </li></ul><p class="md-block-unstyled">That’s a tip that will save you the stress of a torn O-ring. In fact, running the O-ring over jagged or sharp objects could get it torn. You may not be able to notice some of these tears. That’s why you should ensure you prevent them from occurring in the first place.</p><ul class="md-block-unordered-list-item"><li>Even stretching </li></ul><p class="md-block-unstyled">You will have to stretch the O-ring over the shaft. Ensure you do it evenly. Pulling from one side is a no-no. If anything, you should stretch the O-ring as little as possible. You will not just get a tighter grip but added security too.</p><ul class="md-block-unordered-list-item"><li>Don’t roll it down the shaft </li></ul><p class="md-block-unstyled">Instead of rolling the O-ring down the shaft, slide it. If you spiral wind or roll an O-ring, it cannot be properly installed. It will also not function optimally and can even end up being damaged. If you have a lubricant, apply it on the O-ring and you will keep it rolling.</p><ul class="md-block-unordered-list-item"><li>Finishing 	it off </li></ul><p class="md-block-unstyled">Place the female component in a manner that allows its radius to go around the corner. This should be done when you are finalizing the installation process. Ensure the lead of this component is inside the chamfer. This is how you will be able to guarantee the safety of the O-ring.</p><p class="md-block-unstyled"><em class="md-inline-italic">For O-rings to perform optimally, they have to be properly installed. It doesn’t just provide secure sealing but also increases the service life of the component together with the application. Don’t compromise on this process.</em></p><p class="md-block-unstyled"><u class="md-inline-underline"><strong class="md-inline-bold">Installation Guide</strong></u></p><figure class="md-block-image"><img src="https://storage.googleapis.com/eezee-product-images/hQQ_ewcayxrxuLLMMSVQFM.png" alt="" /><figcaption class="md-block-image-caption"></figcaption></figure>

<h3>O Ring | Id 13mm | Thickness 1.5mm Viton 75 Shore</h3>
<h3><strong><ins>Primary Usage</ins></strong></h3>
<p>O-Rings and rubber seals are generally used for:</p>
<ul>
<li>Applications that require resistance to OIL&nbsp;</li>
<li>Applications that are required to work in low temperatures (-0°C)&nbsp;</li>
<li>High performance Fuel systems that requires strictly no leakage</li>
<ul>
<li>Aircrafts&nbsp;</li>
<li>Marine Ships&nbsp;</li>
<li>F1 Cars</li>
</ul>
<li>General Industrial Use&nbsp;&nbsp;&nbsp;</li>
</ul>
<p><strong><ins>Tips for installation of an O-ring</ins></strong></p>
<p>O-rings need to be installed properly for a perfect fit and sealing. It is important that you install the O-ring in a prescribed manner to ensure your application continues to function properly. You will also ensure you increase the life of the application.</p>
<p><strong><ins>So how do you install an O-ring?</ins></strong></p>
<p>The process of installing an O-ring into a male gland is an intricate affair that should be carefully undertaken. Glide it along the shaft so as it reaches the gland. At that point, it should easily snap into place. Simple as it might sound, a number of steps will ensure that the O-ring doesn’t get damaged.</p>
<p>If you want to install an O-ring correctly and within a short time, here are steps to follow:</p>
<ul>
<li>Covering 	and lubricating the threading of the shaft&nbsp;</li>
</ul>
<p>The threading of the shaft has the potential of tearing the rubber seal. Cover the threads using a masking tape and then lubricate them to allow for easy passage of the O-ring. The aim is to have the O-ring slide through without getting torn.</p>
<ul>
<li>Don’t force it over sharp corners&nbsp;</li>
</ul>
<p>That’s a tip that will save you the stress of a torn O-ring. In fact, running the O-ring over jagged or sharp objects could get it torn. You may not be able to notice some of these tears. That’s why you should ensure you prevent them from occurring in the first place.</p>
<ul>
<li>Even stretching&nbsp;</li>
</ul>
<p>You will have to stretch the O-ring over the shaft. Ensure you do it evenly. Pulling from one side is a no-no. If anything, you should stretch the O-ring as little as possible. You will not just get a tighter grip but added security too.</p>
<ul>
<li>Don’t roll it down the shaft&nbsp;</li>
</ul>
<p>Instead of rolling the O-ring down the shaft, slide it. If you spiral wind or roll an O-ring, it cannot be properly installed. It will also not function optimally and can even end up being damaged. If you have a lubricant, apply it on the O-ring and you will keep it rolling.</p>
<ul>
<li>Finishing 	it off&nbsp;</li>
</ul>
<p>Place the female component in a manner that allows its radius to go around the corner. This should be done when you are finalizing the installation process. Ensure the lead of this component is inside the chamfer. This is how you will be able to guarantee the safety of the O-ring.</p>
<p><em>For O-rings to perform optimally, they have to be properly installed. It doesn’t just provide secure sealing but also increases the service life of the component together with the application. Don’t compromise on this process.</em></p>
<p><strong><ins>Installation Guide</ins></strong></p>

        <div class="img-ctnr">
          <amp-img  
            on="tap:cs422"
            tabindex="0"
            role="button"
            class="contain"
            layout="fill"
            src="https://storage.googleapis.com/eezee-product-images/hQQ_ewcayxrxuLLMMSVQFM.png"
          ></amp-img>
        </div>
    
        <amp-image-lightbox 
          id="cs422" 
          layout="nodisplay"></amp-image-lightbox>

        


John

Others

Optibelt

Gates

SAMTECH

VITON

V Rings

Oil Seals

Shaft Couplings

Plumbing Tools & Equipment

Hydraulic Seals

Wall Plugs, Anchors, Fixings & Kits

Vee-Belts

buyerIntroduction

ring id 13mm thickness 1.5mm viton 75 shore cincin diameter ketebalan 1,5mm o-ring oem gelang oem/oem代工 型圈 内径 13 毫米 厚度 1.5 肖氏硬度 o型圈 oem代工

o-ring-id-13mm-thickness-1-5mm-viton-75-shore

<h3 class="md-block-header-three">Specification:</h3><ul class="md-block-unordered-list-item"><li>Brand: Iwata</li><li>Product Type: Screw Cap</li><li>Material: Iron</li><li>Compatible Screw Size: M5</li><li>G: 13 mm</li><li>L: 30 mm</li><li>Ød: 4 mm</li><li>ØD: 7 mm</li><li>A: 9.5 mm</li><li>C: 24 mm</li><li>Quantity per Package: 1</li></ul>

<h3>Specification:</h3>
<ul>
<li>Brand: Iwata</li>
<li>Product Type: Screw Cap</li>
<li>Material: Iron</li>
<li>Compatible Screw Size: M5</li>
<li>G: 13 mm</li>
<li>L: 30 mm</li>
<li>Ød: 4 mm</li>
<li>ØD: 7 mm</li>
<li>A: 9.5 mm</li>
<li>C: 24 mm</li>
<li>Quantity per Package: 1</li>
</ul>


Leland Tan

Iwata Iron Screw Cap 4mm SC05

iwata iron screw cap 4mm sc05 tutup sekrup besi lug skru iwata/岩田 县铁制螺帽4mm 接线片' 岩田

iwata-iron-screw-cap-4mm-sc05

<h3 class="md-block-header-three">Specification:</h3><ul class="md-block-unordered-list-item"><li>Brand: Iwata</li><li>Product Type: Screw Cap</li><li>Material: Iron</li><li>Compatible Screw Size: M10</li><li>G: 20 mm</li><li>L: 61 mm</li><li>Ød: 8 mm</li><li>ØD: 13 mm</li><li>A: 18 mm</li><li>C: 48 mm</li><li>Quantity per Package: 1</li></ul>

<h3>Specification:</h3>
<ul>
<li>Brand: Iwata</li>
<li>Product Type: Screw Cap</li>
<li>Material: Iron</li>
<li>Compatible Screw Size: M10</li>
<li>G: 20 mm</li>
<li>L: 61 mm</li>
<li>Ød: 8 mm</li>
<li>ØD: 13 mm</li>
<li>A: 18 mm</li>
<li>C: 48 mm</li>
<li>Quantity per Package: 1</li>
</ul>


Iwata Iron Screw Cap 8mm SC10

iwata iron screw cap 8mm sc10 lug skru besi iwata/岩田 县铁螺丝帽8mm 接线片' 岩田

iwata-iron-screw-cap-8mm-sc10

The base colour used for the push-pull type and the composite type

It can be used as a bearing with a thrust washer

Thrust Washer (SUS304/Nitriding) - 1 Piece

<h3 class="md-block-header-three">Features:</h3><ul class="md-block-unordered-list-item"><li>The base colour used for the push-pull type and the composite type</li><li>It can be used as a bearing with a thrust washer</li><li>Material is stainless steel</li></ul><h3 class="md-block-header-three">Specification:</h3><ul class="md-block-unordered-list-item"><li>Brand: Iwata</li><li>Product Type: Locking Nut</li><li>Material: Stainless Steel SUS303</li><li>Corresponding Screw: M6</li><li>Size: Short</li><li>J: 7.5 mm</li><li>L: 4.5 mm</li><li>G: 2 mm</li><li>φD: 9.2 mm</li><li>φd: 6.2 mm</li><li>φQ: 13 mm</li></ul><h3 class="md-block-header-three">Accessories:</h3><ul class="md-block-unordered-list-item"><li>Thrust Washer (SUS304/Nitriding) - 1 Piece</li></ul>

<h3>Features:</h3>
<ul>
<li>The base colour used for the push-pull type and the composite type</li>
<li>It can be used as a bearing with a thrust washer</li>
<li>Material is stainless steel</li>
</ul>
<h3>Specification:</h3>
<ul>
<li>Brand: Iwata</li>
<li>Product Type: Locking Nut</li>
<li>Material: Stainless Steel SUS303</li>
<li>Corresponding Screw: M6</li>
<li>Size: Short</li>
<li>J: 7.5 mm</li>
<li>L: 4.5 mm</li>
<li>G: 2 mm</li>
<li>φD: 9.2 mm</li>
<li>φd: 6.2 mm</li>
<li>φQ: 13 mm</li>
</ul>
<h3>Accessories:</h3>
<ul>
<li>Thrust Washer (SUS304/Nitriding) - 1 Piece</li>
</ul>


IT Accessories

Hooks & Eyes

Machinery Accessories

Iwata Stainless Steel Short Locking Nut for Base Set 7.5mm BBC06S-T

iwata stainless steel short locking nut base set 7.5mm bbc06s-t mur pengunci pendek untuk basis nuts keluli tahan karat dasar iwata/岩田 制作所7.5mm底座用不锈钢短锁紧螺母bbc06s-t 岩田

iwata-stainless-steel-short-locking-nut-for-base-set-7-5mm-bbc06s-t

Shim Ring, Inner Diameter 5mm X Outer Diameter 13mm, Pack of 10 (Available in Brass, Carbon Steel and 304 Stainless Steel)

Shim Rings, also known as Shim Washers, are available in various thickness to align gaps and uneven surfaces. Shim washers look similar to flat washers, but are different in their usage and purpose.

Produced in Japan, these are made to extremely precise tolerances and are free from burrs. We are able to offer shim washers in different materials such as Brass, Carbon Steel (SPCC) and 304 stainless steel.

Use them for screws, axles, bearing faces and machine bases. Depending on the material, thickness variants range from 0.01mm to 1mm. Each package contains 10 pcs of the same thickness in the above given inner diameter and outer diameter sizes.

Shim washers and flat washers are inherently different in their purpose and tolerances. Here are three differences that set shim washers apart from flat washers.

They serve a different purpose in life. While flat washers are used for fastening, load distribution and surface protection, shim washers are used for gap alignment. Flat washers are usually used together with screws, bolts or nuts. While shim washers can be used in the same way, they can be slotted into threaded screws or axles to carry out their job.

Based on DIN125A standard, flat washers are produced with nominal dimensions with no tolerance values given. Our flat washers are supplied with the understanding that the thickness variance will range from 0 to 0.2mm. For example, an M3 flat washer will have thickness ranging from 0.4mm to 0.6mm, even in the same batch!

Shim washers are produced to close tolerances, usually up to 0.2mm for ID and OD, and as small as +/-0.02mm for thickness. 

In short, shim washers are more precise than flat washers because they have to be. During gap alignment or leveling, minor differences in thickness and diameters must be taken into account for fear of misalignment. 

Flat washers usually have a single thickness based on a given ID and OD. For example, an M3 flat washer with ID 3.2mm and OD 6mm will have thickness 0.4mm. If you are lucky (or not), you might find some with 0.5mm in the same batch. Not reassuring? Not to worry, being used for fastening, the thickness of flat washers is usually not a focal point.

Product Description: Shim Ring (Also known as Shim Washer)

Manufacturer: Iwata Manufacturing Co., Ltd

Materials: Carbon Steel (SPCC), Brass and 304 Stainless Steel

<h3 class="md-block-header-three"><strong class="md-inline-bold">Shim Ring, Inner Diameter 5mm X Outer Diameter 13mm, Pack of 10 (Available in Brass, Carbon Steel and 304 Stainless Steel)</strong></h3><p class="md-block-unstyled"><strong class="md-inline-bold">Shim Rings, also known as Shim Washers, are available in various thickness to align gaps and uneven surfaces. Shim washers look similar to flat washers, but are different in their usage and purpose.</strong></p><p class="md-block-unstyled"><strong class="md-inline-bold">Produced in Japan, these are made to extremely precise tolerances and are free from burrs. We are able to offer shim washers in different materials such as Brass, Carbon Steel (SPCC) and 304 stainless steel.</strong></p><p class="md-block-unstyled"><strong class="md-inline-bold">Use them for screws, axles, bearing faces and machine bases. Depending on the material, thickness variants range from 0.01mm to 1mm. Each package contains 10 pcs of the same thickness in the above given inner diameter and outer diameter sizes.</strong></p><p class="md-block-unstyled">Shim washers and flat washers are inherently different in their purpose and tolerances. Here are three differences that set shim washers apart from flat washers.</p><p class="md-block-unstyled">Purpose And Usage</p><p class="md-block-unstyled">They serve a different purpose in life. While flat washers are used for fastening, load distribution and surface protection, shim washers are used for gap alignment. Flat washers are usually used together with screws, bolts or nuts. While shim washers can be used in the same way, they can be slotted into threaded screws or axles to carry out their job.</p><p class="md-block-unstyled">Tolerances</p><p class="md-block-unstyled">Based on DIN125A standard, flat washers are produced with nominal dimensions with no tolerance values given. Our flat washers are supplied with the understanding that the thickness variance will range from 0 to 0.2mm. For example, an M3 flat washer will have thickness ranging from 0.4mm to 0.6mm, even in the same batch!</p><p class="md-block-unstyled">Shim washers are produced to close tolerances, usually up to 0.2mm for ID and OD, and as small as +/-0.02mm for thickness. </p><p class="md-block-unstyled">In short, shim washers are more precise than flat washers because they have to be. During gap alignment or leveling, minor differences in thickness and diameters must be taken into account for fear of misalignment. </p><p class="md-block-unstyled">Available Thickness</p><p class="md-block-unstyled">Flat washers usually have a single thickness based on a given ID and OD. For example, an M3 flat washer with ID 3.2mm and OD 6mm will have thickness 0.4mm. If you are lucky (or not), you might find some with 0.5mm in the same batch. Not reassuring? Not to worry, being used for fastening, the thickness of flat washers is usually not a focal point.</p><p class="md-block-unstyled">Product Description: Shim Ring (Also known as Shim Washer)</p><p class="md-block-unstyled">Manufacturer: Iwata Manufacturing Co., Ltd</p><p class="md-block-unstyled">Materials: Carbon Steel (SPCC), Brass and 304 Stainless Steel</p><p class="md-block-unstyled">ID: 5mm</p><p class="md-block-unstyled">OD: 13mm</p><p class="md-block-unstyled">Thickness: 0.01mm to 1mm.</p><p class="md-block-unstyled">Quantity Per Package: 10 pcs</p><p class="md-block-unstyled">Country of Origin: Japan</p>

<h3><strong>Shim Ring, Inner Diameter 5mm X Outer Diameter 13mm, Pack of 10 (Available in Brass, Carbon Steel and 304 Stainless Steel)</strong></h3>
<p><strong>Shim Rings, also known as Shim Washers, are available in various thickness to align gaps and uneven surfaces. Shim washers look similar to flat washers, but are different in their usage and purpose.</strong></p>
<p><strong>Produced in Japan, these are made to extremely precise tolerances and are free from burrs. We are able to offer shim washers in different materials such as Brass, Carbon Steel (SPCC) and 304 stainless steel.</strong></p>
<p><strong>Use them for screws, axles, bearing faces and machine bases. Depending on the material, thickness variants range from 0.01mm to 1mm. Each package contains 10 pcs of the same thickness in the above given inner diameter and outer diameter sizes.</strong></p>
<p>Shim washers and flat washers are inherently different in their purpose and tolerances. Here are three differences that set shim washers apart from flat washers.</p>
<p>Purpose And Usage</p>
<p>They serve a different purpose in life. While flat washers are used for fastening, load distribution and surface protection, shim washers are used for gap alignment. Flat washers are usually used together with screws, bolts or nuts. While shim washers can be used in the same way, they can be slotted into threaded screws or axles to carry out their job.</p>
<p>Tolerances</p>
<p>Based on DIN125A standard, flat washers are produced with nominal dimensions with no tolerance values given. Our flat washers are supplied with the understanding that the thickness variance will range from 0 to 0.2mm. For example, an M3 flat washer will have thickness ranging from 0.4mm to 0.6mm, even in the same batch!</p>
<p>Shim washers are produced to close tolerances, usually up to 0.2mm for ID and OD, and as small as +/-0.02mm for thickness. </p>
<p>In short, shim washers are more precise than flat washers because they have to be. During gap alignment or leveling, minor differences in thickness and diameters must be taken into account for fear of misalignment. </p>
<p>Available Thickness</p>
<p>Flat washers usually have a single thickness based on a given ID and OD. For example, an M3 flat washer with ID 3.2mm and OD 6mm will have thickness 0.4mm. If you are lucky (or not), you might find some with 0.5mm in the same batch. Not reassuring? Not to worry, being used for fastening, the thickness of flat washers is usually not a focal point.</p>
<p>Product Description: Shim Ring (Also known as Shim Washer)</p>
<p>Manufacturer: Iwata Manufacturing Co., Ltd</p>
<p>Materials: Carbon Steel (SPCC), Brass and 304 Stainless Steel</p>
<p>ID: 5mm</p>
<p>OD: 13mm</p>
<p>Thickness: 0.01mm to 1mm.</p>
<p>Quantity Per Package: 10 pcs</p>
<p>Country of Origin: Japan</p>


Precision Brand

Ergomat

Southco

DYMON

SCRUBS

Screw

Other Tools

Hose Clamp

Leland

Iwata Shim Ring, Inner Diameter 5mm X Outer Diameter 13mm, Pack of 10

iwata shim ring, inner diameter 5mm outer 13mm, pack 10 cincin iwata, dalam luar kemasan buah washers pek iwata/岩田 垫片环，内径 外径 13mm，10 个一包 岩田

iwata-shim-ring-inner-diameter-5mm-x-outer-diameter-13mm-pack-of-10

Carbon Steel ID 5mm x OD 13mm x 0.10mm PN RF005013010, Pack of 10 Pieces

Carbon Steel ID 5mm x OD 13mm x 0.15mm PN RF005013015, Pack of 10 Pieces

Carbon Steel ID 5mm x OD 13mm x 0.20mm PN RF005013020, Pack of 10 Pieces

Carbon Steel ID 5mm x OD 13mm x 0.30mm PN RF005013030, Pack of 10 Pieces

Carbon Steel ID 5mm x OD 13mm x 0.50mm PN RF005013050, Pack of 10 Pieces

Carbon Steel ID 5mm x OD 13mm x 1mm PN RF005013100, Pack of 10 Pieces

Brass ID 5mm x OD 13mm x 0.05mm PN RB005013005, Pack of 10 Pieces

Brass ID 5mm x OD 13mm x 0.10mm PN RB005013010, Pack of 10 Pieces

Brass ID 5mm x OD 13mm x 0.15mm PN RB005013015, Pack of 10 Pieces

Brass ID 5mm x OD 13mm x 0.20mm PN RB005013020, Pack of 10 Pieces

Brass ID 5mm x OD 13mm x 0.30mm PN RB005013030, Pack of 10 Pieces

Brass ID 5mm x OD 13mm x 0.50mm PN RB005013050, Pack of 10 Pieces

Brass ID 5mm x OD 13mm x 1mm PN RB005013100, Pack of 10 Pieces

304 SST ID 5mm x OD 13mm x 0.01mm PN RS005013001, Pack of 10 Pieces

304 SST ID 5mm x OD 13mm x 0.02mm PN RS005013002, Pack of 10 Pieces

304 SST ID 5mm x OD 13mm x 0.03mm PN RS005013003, Pack of 10 Pieces

304 SST ID 5mm x OD 13mm x 0.05mm PN RS005013005, Pack of 10 Pieces

304 SST ID 5mm x OD 13mm x 0.10mm PN RS005013010, Pack of 10 Pieces

304 SST ID 5mm x OD 13mm x 0.15mm PN RS005013015, Pack of 10 Pieces

304 SST ID 5mm x OD 13mm x 0.20mm PN RS005013020, Pack of 10 Pieces

304 SST ID 5mm x OD 13mm x 0.30mm PN RS005013030, Pack of 10 Pieces

304 SST ID 5mm x OD 13mm x 0.50mm PN RS005013050, Pack of 10 Pieces

304 SST ID 5mm x OD 13mm x 1mm PN RS005013100, Pack of 10 Pieces

Material

<h3 class="md-block-header-three">Features:</h3><ul class="md-block-unordered-list-item"><li>The base colour used for the push-pull type and the composite type</li><li>It can be used as a bearing with a thrust washer</li><li>Material is stainless steel</li></ul><h3 class="md-block-header-three">Specification:</h3><ul class="md-block-unordered-list-item"><li>Brand: Iwata</li><li>Product Type: Locking Nut</li><li>Material: Stainless Steel SUS303</li><li>Corresponding Screw: M6</li><li>Size: Long</li><li>J: 10.5 mm</li><li>L: 7.5 mm</li><li>G: 2 mm</li><li>φD: 9.2 mm</li><li>φd: 6.2 mm</li><li>φQ: 13 mm</li></ul><h3 class="md-block-header-three">Accessories:</h3><ul class="md-block-unordered-list-item"><li>Thrust Washer (SUS304/Nitriding) - 1 Piece</li></ul>

<h3>Features:</h3>
<ul>
<li>The base colour used for the push-pull type and the composite type</li>
<li>It can be used as a bearing with a thrust washer</li>
<li>Material is stainless steel</li>
</ul>
<h3>Specification:</h3>
<ul>
<li>Brand: Iwata</li>
<li>Product Type: Locking Nut</li>
<li>Material: Stainless Steel SUS303</li>
<li>Corresponding Screw: M6</li>
<li>Size: Long</li>
<li>J: 10.5 mm</li>
<li>L: 7.5 mm</li>
<li>G: 2 mm</li>
<li>φD: 9.2 mm</li>
<li>φd: 6.2 mm</li>
<li>φQ: 13 mm</li>
</ul>
<h3>Accessories:</h3>
<ul>
<li>Thrust Washer (SUS304/Nitriding) - 1 Piece</li>
</ul>


Iwata Stainless Steel Long Locking Nut for Base Set 10.5mm BBC06L-T

iwata stainless steel long locking nut base set 10.5mm bbc06l-t mur pengunci panjang untuk basis nuts keluli tahan karat pangkalan iwata/岩田 不锈钢长锁定螺母，用于底座套件10.5mm 岩田

iwata-stainless-steel-long-locking-nut-for-base-set-10-5mm-bbc06l-t

Thrust Washer (Oil Impregnated Metal) - 1 Piece

<h3 class="md-block-header-three">Features:</h3><ul class="md-block-unordered-list-item"><li>The base colour used for the push-pull type and the composite type</li><li>It can be used as a bearing with a thrust washer</li><li>Material is iron</li></ul><h3 class="md-block-header-three">Specification:</h3><ul class="md-block-unordered-list-item"><li>Brand: Iwata</li><li>Product Type: Locking Nut</li><li>Material: Iron S45C-D</li><li>Surface Treatment: Black Dyed</li><li>Corresponding Screw: M6</li><li>Size: Short</li><li>J: 7.5 mm</li><li>L: 4.5 mm</li><li>G: 2 mm</li><li>φD: 9.2 mm</li><li>φd: 6.2 mm</li><li>φQ: 13 mm</li></ul><h3 class="md-block-header-three">Accessories:</h3><ul class="md-block-unordered-list-item"><li>Thrust Washer (Oil Impregnated Metal) - 1 Piece</li></ul>

<h3>Features:</h3>
<ul>
<li>The base colour used for the push-pull type and the composite type</li>
<li>It can be used as a bearing with a thrust washer</li>
<li>Material is iron</li>
</ul>
<h3>Specification:</h3>
<ul>
<li>Brand: Iwata</li>
<li>Product Type: Locking Nut</li>
<li>Material: Iron S45C-D</li>
<li>Surface Treatment: Black Dyed</li>
<li>Corresponding Screw: M6</li>
<li>Size: Short</li>
<li>J: 7.5 mm</li>
<li>L: 4.5 mm</li>
<li>G: 2 mm</li>
<li>φD: 9.2 mm</li>
<li>φd: 6.2 mm</li>
<li>φQ: 13 mm</li>
</ul>
<h3>Accessories:</h3>
<ul>
<li>Thrust Washer (Oil Impregnated Metal) - 1 Piece</li>
</ul>


Iwata Iron Short Locking Nut for Base Set 7.5mm BBC06S-Z

iwata iron short locking nut base set 7.5mm bbc06s-z lock untuk nuts pengunci pendek besi pangkalan iwata/岩田 县铁制短锁紧螺母7.5mm 岩田

iwata-iron-short-locking-nut-for-base-set-7-5mm-bbc06s-z

<h3 class="md-block-header-three">Features:</h3><ul class="md-block-unordered-list-item"><li>The base colour used for the push-pull type and the composite type</li><li>It can be used as a bearing with a thrust washer</li><li>Material is iron</li></ul><h3 class="md-block-header-three">Specification:</h3><ul class="md-block-unordered-list-item"><li>Brand: Iwata</li><li>Product Type: Locking Nut</li><li>Material: Iron S45C-D</li><li>Surface Treatment: Black Dyed</li><li>Corresponding Screw: M6</li><li>Size: Long</li><li>J: 10.5 mm</li><li>L: 7.5 mm</li><li>G: 2 mm</li><li>φD: 9.2 mm</li><li>φd: 6.2 mm</li><li>φQ: 13 mm</li></ul><h3 class="md-block-header-three">Accessories:</h3><ul class="md-block-unordered-list-item"><li>Thrust Washer (Oil Impregnated Metal) - 1 Piece</li></ul>

<h3>Features:</h3>
<ul>
<li>The base colour used for the push-pull type and the composite type</li>
<li>It can be used as a bearing with a thrust washer</li>
<li>Material is iron</li>
</ul>
<h3>Specification:</h3>
<ul>
<li>Brand: Iwata</li>
<li>Product Type: Locking Nut</li>
<li>Material: Iron S45C-D</li>
<li>Surface Treatment: Black Dyed</li>
<li>Corresponding Screw: M6</li>
<li>Size: Long</li>
<li>J: 10.5 mm</li>
<li>L: 7.5 mm</li>
<li>G: 2 mm</li>
<li>φD: 9.2 mm</li>
<li>φd: 6.2 mm</li>
<li>φQ: 13 mm</li>
</ul>
<h3>Accessories:</h3>
<ul>
<li>Thrust Washer (Oil Impregnated Metal) - 1 Piece</li>
</ul>


Iwata Iron Long Locking Nut for Base Set 10.5mm BBC06L-Z

iwata iron long locking nut base set 10.5mm bbc06l-z untuk nuts pengunci panjang besi pangkalan iwata/岩田 县铁制长型固定螺母10.5mm 岩田

iwata-iron-long-locking-nut-for-base-set-10-5mm-bbc06l-z

-Mirror Chrome Finish Protects Sockets & Accessories Against Corrosion, Is Easy to Clean and Looks Great 

-6 Pt Socket with Positive Grip Broaching 

-Detents on all 4 walls of Female Drive End Engages Ratchet or Extension Spring Loaded Retention Ball in Any Position 

-Socket Ends are Chamfered Making Fastener, Ratchet or Extension Installation Easier  

<p class="md-block-unstyled">Description and Features: </p><p class="md-block-unstyled">-1/4&quot; Dr. Deep Socket Metric (6 Point) </p><p class="md-block-unstyled">-Mirror Chrome Finish Protects Sockets &amp; Accessories Against Corrosion, Is Easy to Clean and Looks Great </p><p class="md-block-unstyled">-6 Pt Socket with Positive Grip Broaching </p><p class="md-block-unstyled">-Detents on all 4 walls of Female Drive End Engages Ratchet or Extension Spring Loaded Retention Ball in Any Position </p><p class="md-block-unstyled">-Socket Ends are Chamfered Making Fastener, Ratchet or Extension Installation Easier  </p><p class="md-block-unstyled"><br/></p><p class="md-block-unstyled"><br/></p>

<p>Description and Features:&nbsp;</p>
<p>-1/4" Dr. Deep Socket Metric (6 Point)&nbsp;</p>
<p>-Mirror Chrome Finish Protects Sockets &amp; Accessories Against Corrosion, Is Easy to Clean and Looks Great&nbsp;</p>
<p>-6 Pt Socket with Positive Grip Broaching&nbsp;</p>
<p>-Detents on all 4 walls of Female Drive End Engages Ratchet or Extension Spring Loaded Retention Ball in Any Position&nbsp;</p>
<p>-Socket Ends are Chamfered Making Fastener, Ratchet or Extension Installation Easier&nbsp;&nbsp;</p>
<p></p>
<p></p>


Terence 

Terence Sim

Boxo 1/4" Dr. Deep Socket (6pt) SK2062-L

boxo 1/4" dr. deep socket (6pt) sk2062-l 1/4 "dr. sockets boxo/盒装 1/4英寸博士深套筒（6pt）sk2062-l 盒装

boxo-1-4-dr-deep-socket-6pt-sk2062-l

SK2062-05L  5mm

SK2062-06L  6mm

SK2062-07L  7mm

SK2062-10L  10mm

SK2062-11L  11mm

SK2062-13L 13mm

Size

Elora 1455-M 3.5 mm Hexagon Socket 1/4″ Drive

Description:- Matt chrome-plated
knurled
Elora-Chrome-Vanadium 31CrV3 / 1.2208
female square Conforms to DIN 3120-C 6,3, ISO 1174, with ball retaining groove
Conforms to DIN 3124, ISO 2725-1

Elora 1455-M 4 mm Hexagon Socket 1/4″ Drive

Elora 1455-M 4.5 mm Hexagon Socket 1/4″ Drive

Elora 1455-M 5 mm Hexagon Socket 1/4″ Drive

Elora 1455-M 5.5 mm Hexagon Socket 1/4″ Drive

Elora 1455-M 6 mm Hexagon Socket 1/4″ Drive

Elora 1455-M 7 mm Hexagon Socket 1/4″ Drive

Elora 1455-M 8 mm Hexagon Socket 1/4″ Drive

Elora 1455-M 9 mm Hexagon Socket 1/4″ Drive

Elora 1455-M 10 mm Hexagon Socket 1/4″ Drive

Elora 1455-M 11 mm Hexagon Socket 1/4″ Drive

<h3 class="md-block-header-three"><strong class="md-inline-bold">Elora 1455-M 3.5 mm Hexagon Socket 1/4″ Drive</strong></h3><h3 class="md-block-header-three"><strong class="md-inline-bold">Product code:  1455000352000  </strong></h3><ul class="md-block-unordered-list-item"><li><strong class="md-inline-bold">Description</strong>:- Matt chrome-plated<br/>knurled<br/>Elora-Chrome-Vanadium 31CrV3 / 1.2208<br/>female square Conforms to DIN 3120-C 6,3, ISO 1174, with ball retaining groove<br/>Conforms to DIN 3124, ISO 2725-1</li><li><strong class="md-inline-bold">Weight g</strong>:- 9</li><li><strong class="md-inline-bold">Length mm</strong>:- 25</li></ul><p class="md-block-unstyled"> </p><h3 class="md-block-header-three"><strong class="md-inline-bold">Elora 1455-M 4 mm Hexagon Socket 1/4″ Drive</strong></h3><h3 class="md-block-header-three"><strong class="md-inline-bold">Product code: </strong> 1455000042000  </h3><ul class="md-block-unordered-list-item"><li><strong class="md-inline-bold">Description</strong>:- Matt chrome-plated<br/>knurled<br/>Elora-Chrome-Vanadium 31CrV3 / 1.2208<br/>female square Conforms to DIN 3120-C 6,3, ISO 1174, with ball retaining groove<br/>Conforms to DIN 3124, ISO 2725-1</li><li><strong class="md-inline-bold">Weight g</strong>:- 9</li><li><strong class="md-inline-bold">Length mm</strong>:- 25</li></ul><p class="md-block-unstyled"> </p><h3 class="md-block-header-three"><strong class="md-inline-bold">Elora 1455-M 4.5 mm Hexagon Socket 1/4″ Drive</strong></h3><h3 class="md-block-header-three"><strong class="md-inline-bold">Product code: </strong> 1455000452000  </h3><ul class="md-block-unordered-list-item"><li><strong class="md-inline-bold">Description</strong>:- Matt chrome-plated<br/>knurled<br/>Elora-Chrome-Vanadium 31CrV3 / 1.2208<br/>female square Conforms to DIN 3120-C 6,3, ISO 1174, with ball retaining groove<br/>Conforms to DIN 3124, ISO 2725-1</li><li><strong class="md-inline-bold">Weight g</strong>:- 10</li><li><strong class="md-inline-bold">Length mm</strong>:- 25</li></ul><p class="md-block-unstyled"> </p><h3 class="md-block-header-three"><strong class="md-inline-bold">Elora 1455-M 5 mm Hexagon Socket 1/4″ Drive</strong></h3><h3 class="md-block-header-three"><strong class="md-inline-bold">Product code: </strong> 1455000052000  </h3><ul class="md-block-unordered-list-item"><li><strong class="md-inline-bold">Description</strong>:- Matt chrome-plated<br/>knurled<br/>Elora-Chrome-Vanadium 31CrV3 / 1.2208<br/>female square Conforms to DIN 3120-C 6,3, ISO 1174, with ball retaining groove<br/>Conforms to DIN 3124, ISO 2725-1</li><li><strong class="md-inline-bold">Weight g</strong>:- 10</li><li><strong class="md-inline-bold">Length mm</strong>:- 25</li></ul><p class="md-block-unstyled"> </p><h3 class="md-block-header-three"><strong class="md-inline-bold">Elora 1455-M 5.5 mm Hexagon Socket 1/4″ Drive</strong></h3><h3 class="md-block-header-three"><strong class="md-inline-bold">Product code: </strong> 1455000552000  </h3><ul class="md-block-unordered-list-item"><li><strong class="md-inline-bold">Description</strong>:- Matt chrome-plated<br/>knurled<br/>Elora-Chrome-Vanadium 31CrV3 / 1.2208<br/>female square Conforms to DIN 3120-C 6,3, ISO 1174, with ball retaining groove<br/>Conforms to DIN 3124, ISO 2725-1</li><li><strong class="md-inline-bold">Weight g</strong>:- 10</li><li><strong class="md-inline-bold">Length mm</strong>:- 25</li></ul><p class="md-block-unstyled"> </p><h3 class="md-block-header-three"><strong class="md-inline-bold">Elora 1455-M 6 mm Hexagon Socket 1/4″ Drive</strong></h3><h3 class="md-block-header-three"><strong class="md-inline-bold">Product code: </strong> 1455000062000  </h3><ul class="md-block-unordered-list-item"><li><strong class="md-inline-bold">Description</strong>:- Matt chrome-plated<br/>knurled<br/>Elora-Chrome-Vanadium 31CrV3 / 1.2208<br/>female square Conforms to DIN 3120-C 6,3, ISO 1174, with ball retaining groove<br/>Conforms to DIN 3124, ISO 2725-1</li><li><strong class="md-inline-bold">Weight g</strong>:- 10</li><li><strong class="md-inline-bold">Length mm</strong>:- 25</li></ul><p class="md-block-unstyled"> </p><h3 class="md-block-header-three"><strong class="md-inline-bold">Elora 1455-M 7 mm Hexagon Socket 1/4″ Drive</strong></h3><h3 class="md-block-header-three"><strong class="md-inline-bold">Product code: </strong> 1455000072000  </h3><ul class="md-block-unordered-list-item"><li><strong class="md-inline-bold">Description</strong>:- Matt chrome-plated<br/>knurled<br/>Elora-Chrome-Vanadium 31CrV3 / 1.2208<br/>female square Conforms to DIN 3120-C 6,3, ISO 1174, with ball retaining groove<br/>Conforms to DIN 3124, ISO 2725-1</li><li><strong class="md-inline-bold">Weight g</strong>:- 11</li><li><strong class="md-inline-bold">Length mm</strong>:- 25</li></ul><p class="md-block-unstyled"> </p><h3 class="md-block-header-three"><strong class="md-inline-bold">Elora 1455-M 8 mm Hexagon Socket 1/4″ Drive</strong></h3><h3 class="md-block-header-three"><strong class="md-inline-bold">Product code: </strong> 1455000082000  </h3><ul class="md-block-unordered-list-item"><li><strong class="md-inline-bold">Description</strong>:- Matt chrome-plated<br/>knurled<br/>Elora-Chrome-Vanadium 31CrV3 / 1.2208<br/>female square Conforms to DIN 3120-C 6,3, ISO 1174, with ball retaining groove<br/>Conforms to DIN 3124, ISO 2725-1</li><li><strong class="md-inline-bold">Weight g</strong>:- 12</li><li><strong class="md-inline-bold">Length mm</strong>:- 25</li></ul><p class="md-block-unstyled"> </p><h3 class="md-block-header-three"><strong class="md-inline-bold">Elora 1455-M 9 mm Hexagon Socket 1/4″ Drive</strong></h3><h3 class="md-block-header-three"><strong class="md-inline-bold">Product code: </strong> 1455000092000  </h3><ul class="md-block-unordered-list-item"><li><strong class="md-inline-bold">Description</strong>:- Matt chrome-plated<br/>knurled<br/>Elora-Chrome-Vanadium 31CrV3 / 1.2208<br/>female square Conforms to DIN 3120-C 6,3, ISO 1174, with ball retaining groove<br/>Conforms to DIN 3124, ISO 2725-1</li><li><strong class="md-inline-bold">Weight g</strong>:- 14</li><li><strong class="md-inline-bold">Length mm</strong>:- 25</li></ul><p class="md-block-unstyled"> </p><h3 class="md-block-header-three"><strong class="md-inline-bold">Elora 1455-M 10 mm Hexagon Socket 1/4″ Drive</strong></h3><h3 class="md-block-header-three"><strong class="md-inline-bold">Product code: </strong> 1455000102000  </h3><ul class="md-block-unordered-list-item"><li><strong class="md-inline-bold">Description</strong>:- Matt chrome-plated<br/>knurled<br/>Elora-Chrome-Vanadium 31CrV3 / 1.2208<br/>female square Conforms to DIN 3120-C 6,3, ISO 1174, with ball retaining groove<br/>Conforms to DIN 3124, ISO 2725-1</li><li><strong class="md-inline-bold">Weight g</strong>:- 18</li><li><strong class="md-inline-bold">Length mm</strong>:- 25</li></ul><p class="md-block-unstyled"> </p><h3 class="md-block-header-three"><strong class="md-inline-bold">Elora 1455-M 11 mm Hexagon Socket 1/4″ Drive</strong></h3><h3 class="md-block-header-three"><strong class="md-inline-bold">Product code: </strong> 1455000112000  </h3><ul class="md-block-unordered-list-item"><li><strong class="md-inline-bold">Description</strong>:- Matt chrome-plated<br/>knurled<br/>Elora-Chrome-Vanadium 31CrV3 / 1.2208<br/>female square Conforms to DIN 3120-C 6,3, ISO 1174, with ball retaining groove<br/>Conforms to DIN 3124, ISO 2725-1</li><li><strong class="md-inline-bold">Weight g</strong>:- 23</li><li><strong class="md-inline-bold">Length mm</strong>:- 25</li></ul><p class="md-block-unstyled"> </p><h3 class="md-block-header-three"><strong class="md-inline-bold">Elora 1455-M 12 mm Hexagon Socket 1/4″ Drive</strong></h3><h3 class="md-block-header-three"><strong class="md-inline-bold">Product code: </strong> 1455000122000  </h3><ul class="md-block-unordered-list-item"><li><strong class="md-inline-bold">Description</strong>:- Matt chrome-plated<br/>knurled<br/>Elora-Chrome-Vanadium 31CrV3 / 1.2208<br/>female square Conforms to DIN 3120-C 6,3, ISO 1174, with ball retaining groove<br/>Conforms to DIN 3124, ISO 2725-1</li><li><strong class="md-inline-bold">Weight g</strong>:- 24</li><li><strong class="md-inline-bold">Length mm</strong>:- 25</li></ul><p class="md-block-unstyled"> </p><h3 class="md-block-header-three"><strong class="md-inline-bold">Elora 1455-M 13 mm Hexagon Socket 1/4″ Drive</strong></h3><h3 class="md-block-header-three"><strong class="md-inline-bold">Product code: </strong> 1455000132000  </h3><ul class="md-block-unordered-list-item"><li><strong class="md-inline-bold">Description</strong>:- Matt chrome-plated<br/>knurled<br/>Elora-Chrome-Vanadium 31CrV3 / 1.2208<br/>female square Conforms to DIN 3120-C 6,3, ISO 1174, with ball retaining groove<br/>Conforms to DIN 3124, ISO 2725-1</li><li><strong class="md-inline-bold">Weight g</strong>:- 24</li><li><strong class="md-inline-bold">Length mm</strong>:- 25</li></ul><p class="md-block-unstyled"> </p><h3 class="md-block-header-three"><strong class="md-inline-bold">Elora 1455-M 14 mm Hexagon Socket 1/4″ Drive</strong></h3><h3 class="md-block-header-three"><strong class="md-inline-bold">Product code: </strong> 1455000142000  </h3><ul class="md-block-unordered-list-item"><li><strong class="md-inline-bold">Description</strong>:- Matt chrome-plated<br/>knurled<br/>Elora-Chrome-Vanadium 31CrV3 / 1.2208<br/>female square Conforms to DIN 3120-C 6,3, ISO 1174, with ball retaining groove<br/>Conforms to DIN 3124, ISO 2725-1</li><li><strong class="md-inline-bold">Weight g</strong>:- 28</li><li><strong class="md-inline-bold">Length mm</strong>:- 25</li></ul><p class="md-block-unstyled"><br/></p>

<h3><strong>Elora 1455-M 3.5 mm Hexagon Socket 1/4″ Drive</strong></h3>
<h3><strong>Product code:  1455000352000  </strong></h3>
<ul>
<li><strong>Description</strong>:- Matt chrome-plated<br>
knurled<br>
Elora-Chrome-Vanadium 31CrV3 / 1.2208<br>
female square Conforms to DIN 3120-C 6,3, ISO 1174, with ball retaining groove<br>
Conforms to DIN 3124, ISO 2725-1</li>
<li><strong>Weight g</strong>:- 9</li>
<li><strong>Length mm</strong>:- 25</li>
</ul>
<p>&nbsp;</p>
<h3><strong>Elora 1455-M 4 mm Hexagon Socket 1/4″ Drive</strong></h3>
<h3><strong>Product code: </strong> 1455000042000&nbsp;&nbsp;</h3>
<ul>
<li><strong>Description</strong>:- Matt chrome-plated<br>
knurled<br>
Elora-Chrome-Vanadium 31CrV3 / 1.2208<br>
female square Conforms to DIN 3120-C 6,3, ISO 1174, with ball retaining groove<br>
Conforms to DIN 3124, ISO 2725-1</li>
<li><strong>Weight g</strong>:- 9</li>
<li><strong>Length mm</strong>:- 25</li>
</ul>
<p>&nbsp;</p>
<h3><strong>Elora 1455-M 4.5 mm Hexagon Socket 1/4″ Drive</strong></h3>
<h3><strong>Product code: </strong> 1455000452000&nbsp;&nbsp;</h3>
<ul>
<li><strong>Description</strong>:- Matt chrome-plated<br>
knurled<br>
Elora-Chrome-Vanadium 31CrV3 / 1.2208<br>
female square Conforms to DIN 3120-C 6,3, ISO 1174, with ball retaining groove<br>
Conforms to DIN 3124, ISO 2725-1</li>
<li><strong>Weight g</strong>:- 10</li>
<li><strong>Length mm</strong>:- 25</li>
</ul>
<p>&nbsp;</p>
<h3><strong>Elora 1455-M 5 mm Hexagon Socket 1/4″ Drive</strong></h3>
<h3><strong>Product code: </strong> 1455000052000&nbsp;&nbsp;</h3>
<ul>
<li><strong>Description</strong>:- Matt chrome-plated<br>
knurled<br>
Elora-Chrome-Vanadium 31CrV3 / 1.2208<br>
female square Conforms to DIN 3120-C 6,3, ISO 1174, with ball retaining groove<br>
Conforms to DIN 3124, ISO 2725-1</li>
<li><strong>Weight g</strong>:- 10</li>
<li><strong>Length mm</strong>:- 25</li>
</ul>
<p>&nbsp;</p>
<h3><strong>Elora 1455-M 5.5 mm Hexagon Socket 1/4″ Drive</strong></h3>
<h3><strong>Product code: </strong> 1455000552000&nbsp;&nbsp;</h3>
<ul>
<li><strong>Description</strong>:- Matt chrome-plated<br>
knurled<br>
Elora-Chrome-Vanadium 31CrV3 / 1.2208<br>
female square Conforms to DIN 3120-C 6,3, ISO 1174, with ball retaining groove<br>
Conforms to DIN 3124, ISO 2725-1</li>
<li><strong>Weight g</strong>:- 10</li>
<li><strong>Length mm</strong>:- 25</li>
</ul>
<p>&nbsp;</p>
<h3><strong>Elora 1455-M 6 mm Hexagon Socket 1/4″ Drive</strong></h3>
<h3><strong>Product code: </strong> 1455000062000&nbsp;&nbsp;</h3>
<ul>
<li><strong>Description</strong>:- Matt chrome-plated<br>
knurled<br>
Elora-Chrome-Vanadium 31CrV3 / 1.2208<br>
female square Conforms to DIN 3120-C 6,3, ISO 1174, with ball retaining groove<br>
Conforms to DIN 3124, ISO 2725-1</li>
<li><strong>Weight g</strong>:- 10</li>
<li><strong>Length mm</strong>:- 25</li>
</ul>
<p>&nbsp;</p>
<h3><strong>Elora 1455-M 7 mm Hexagon Socket 1/4″ Drive</strong></h3>
<h3><strong>Product code: </strong> 1455000072000&nbsp;&nbsp;</h3>
<ul>
<li><strong>Description</strong>:- Matt chrome-plated<br>
knurled<br>
Elora-Chrome-Vanadium 31CrV3 / 1.2208<br>
female square Conforms to DIN 3120-C 6,3, ISO 1174, with ball retaining groove<br>
Conforms to DIN 3124, ISO 2725-1</li>
<li><strong>Weight g</strong>:- 11</li>
<li><strong>Length mm</strong>:- 25</li>
</ul>
<p>&nbsp;</p>
<h3><strong>Elora 1455-M 8 mm Hexagon Socket 1/4″ Drive</strong></h3>
<h3><strong>Product code: </strong> 1455000082000&nbsp;&nbsp;</h3>
<ul>
<li><strong>Description</strong>:- Matt chrome-plated<br>
knurled<br>
Elora-Chrome-Vanadium 31CrV3 / 1.2208<br>
female square Conforms to DIN 3120-C 6,3, ISO 1174, with ball retaining groove<br>
Conforms to DIN 3124, ISO 2725-1</li>
<li><strong>Weight g</strong>:- 12</li>
<li><strong>Length mm</strong>:- 25</li>
</ul>
<p>&nbsp;</p>
<h3><strong>Elora 1455-M 9 mm Hexagon Socket 1/4″ Drive</strong></h3>
<h3><strong>Product code: </strong> 1455000092000&nbsp;&nbsp;</h3>
<ul>
<li><strong>Description</strong>:- Matt chrome-plated<br>
knurled<br>
Elora-Chrome-Vanadium 31CrV3 / 1.2208<br>
female square Conforms to DIN 3120-C 6,3, ISO 1174, with ball retaining groove<br>
Conforms to DIN 3124, ISO 2725-1</li>
<li><strong>Weight g</strong>:- 14</li>
<li><strong>Length mm</strong>:- 25</li>
</ul>
<p>&nbsp;</p>
<h3><strong>Elora 1455-M 10 mm Hexagon Socket 1/4″ Drive</strong></h3>
<h3><strong>Product code: </strong> 1455000102000&nbsp;&nbsp;</h3>
<ul>
<li><strong>Description</strong>:- Matt chrome-plated<br>
knurled<br>
Elora-Chrome-Vanadium 31CrV3 / 1.2208<br>
female square Conforms to DIN 3120-C 6,3, ISO 1174, with ball retaining groove<br>
Conforms to DIN 3124, ISO 2725-1</li>
<li><strong>Weight g</strong>:- 18</li>
<li><strong>Length mm</strong>:- 25</li>
</ul>
<p>&nbsp;</p>
<h3><strong>Elora 1455-M 11 mm Hexagon Socket 1/4″ Drive</strong></h3>
<h3><strong>Product code: </strong> 1455000112000&nbsp;&nbsp;</h3>
<ul>
<li><strong>Description</strong>:- Matt chrome-plated<br>
knurled<br>
Elora-Chrome-Vanadium 31CrV3 / 1.2208<br>
female square Conforms to DIN 3120-C 6,3, ISO 1174, with ball retaining groove<br>
Conforms to DIN 3124, ISO 2725-1</li>
<li><strong>Weight g</strong>:- 23</li>
<li><strong>Length mm</strong>:- 25</li>
</ul>
<p>&nbsp;</p>
<h3><strong>Elora 1455-M 12 mm Hexagon Socket 1/4″ Drive</strong></h3>
<h3><strong>Product code: </strong> 1455000122000&nbsp;&nbsp;</h3>
<ul>
<li><strong>Description</strong>:- Matt chrome-plated<br>
knurled<br>
Elora-Chrome-Vanadium 31CrV3 / 1.2208<br>
female square Conforms to DIN 3120-C 6,3, ISO 1174, with ball retaining groove<br>
Conforms to DIN 3124, ISO 2725-1</li>
<li><strong>Weight g</strong>:- 24</li>
<li><strong>Length mm</strong>:- 25</li>
</ul>
<p>&nbsp;</p>
<h3><strong>Elora 1455-M 13 mm Hexagon Socket 1/4″ Drive</strong></h3>
<h3><strong>Product code: </strong> 1455000132000&nbsp;&nbsp;</h3>
<ul>
<li><strong>Description</strong>:- Matt chrome-plated<br>
knurled<br>
Elora-Chrome-Vanadium 31CrV3 / 1.2208<br>
female square Conforms to DIN 3120-C 6,3, ISO 1174, with ball retaining groove<br>
Conforms to DIN 3124, ISO 2725-1</li>
<li><strong>Weight g</strong>:- 24</li>
<li><strong>Length mm</strong>:- 25</li>
</ul>
<p>&nbsp;</p>
<h3><strong>Elora 1455-M 14 mm Hexagon Socket 1/4″ Drive</strong></h3>
<h3><strong>Product code: </strong> 1455000142000&nbsp;&nbsp;</h3>
<ul>
<li><strong>Description</strong>:- Matt chrome-plated<br>
knurled<br>
Elora-Chrome-Vanadium 31CrV3 / 1.2208<br>
female square Conforms to DIN 3120-C 6,3, ISO 1174, with ball retaining groove<br>
Conforms to DIN 3124, ISO 2725-1</li>
<li><strong>Weight g</strong>:- 28</li>
<li><strong>Length mm</strong>:- 25</li>
</ul>
<p></p>
