Omron

SCHNEIDER ELECTRIC

Simatherm

Electricals

electricals

Contactors

contactors

Electronics Heating & Cooling Components

electronics-heating-cooling-components

Heaters & Radiators

heaters-radiators

Machinery

machinery

Induction Heaters

induction-heaters

Monitoring Relays

monitoring-relays

Motor Starter

motor-starter

Overload Relays

overload-relays

Power Relay

power-relay

simatherm Bearing BInduction Heater IH 210, 400-460V
Heat large rolling bearings up to 300 kg

The most powerful table-top heater 
The IH 210 is suitable for heating large workpieces and rolling bearings weighing up to 300 kg. The IH 210 is supplied with two yokes as standard. The sliding yoke allows easy loading and unloading of the bearing. 

· For rolling bearings weighing up to 300 kg 
· Extremely simple operation thanks to the sliding yoke 
· Available for voltages of 200, 400–480 and 500–575 V 
· Induction coil outside of the housing, shortens the heating times and reduces energy consumption 
· Particularly compact design - including the yokes only 75 kg in weight 
· Automatic demagnetization 
· 5-stage power consumption in combination with smaller yokes, allows smaller bearings to heat up safely and quickly with less energy 
· For workpieces with an inner diameter of 60 to 640 mm 
· Can heat a 210 kg bearing from 20 °C to 110 °C in 20 minutes, thus saving time and energy 
· 3 year manufacturer warranty 

Designation: Heater for large workpieces 
Voltage V / Hz / power: 
- 400 V / 50 Hz / 10.0 kVA 
- 440–480 V / 50–60 Hz / 11.5 kVA 
- 575 V / 60 Hz / 10.4 kVA 
Workpiece: 
- Maximum weight: 300 kg 
- Bore diameter: From 60 mm inner diameter to 640 mm outer diameter 
Temperature control: 
- Range: 0 – 250°C 
- Magnetic probe: yes, type K 
- Accuracy (electronic): ± 3°C 
Time control: 
- Range: 0 – 60 minutes 
- Accuracy: ± 0.01 seconds 
Maximum temperature (approx.): 250°C 
Thermometer mode: yes 
Bearing temperature mode: yes 
Power level: 5 levels / 20-40-60-80-100% 
Automatic demagnetization / residual magnetism: yes / < 2A/cm 
Suitable for heating sealed bearings: yes 
Suitable for heating pre-greased bearings: yes 
Error guide codes: yes 
Thermal magnetic flux: yes 
Maximum magnetic flux: 1.5 T 
Control panel: Keyboard with LED-display 
Size of the operating area (WxH): 250 x 250 mm 
Coil diameter: 135 mm 
Measurements (LxWxH): 600 x 350 x 420 mm 
Overall weight including yokes: 75 kg 
Number of standard yokes: 2 
Standard yokes: 
- 70 x 70 x 420 mm for bearings with a bore diameter of at least 100 mm 
- 40 x 40 x 420 mm for bearings with a bore diameter of at least 60 mm 
Core cross-section: 70 x 70 mm 
Yoke storage: yes, integrated 
Cooling fan: optional 
Sliding yoke: yes 
Housing material: aluminum

Scope of delivery 
· 1x simatherm IH 210 
· 1x User manual 
· 1x Temperature probe 
· 1x Power cord 
· 1x Protective gloves 
· 1x Sliding yoke 70 x 70 for bearings with bore diameter from 100 mm 
· 1x Yoke 40 x 40 for bearings with bore diameter from 60 mm 

Optional: · Yokes (14 x14 mm, 20 x 20 mm, 28 x 28 mm, 40 x 40 mm, 55 x 55 mm 

 Fabrication and assembly
· General mechanical engineering
· Gearbox construction (vehicles and industry)
· Pumps
· Hydraulic equipment
· Electric motor construction
· Conveyor and conveying systems

General operations maintenance
· Metal processing industry
· Paper and cardboard factories
· Textile industry
· Larger printing plants
· Food industry
· Building services
· Vehicles (buses, trucks, rail vehicles)
· Construction machinery
· Forklifts, storage equipment/lifting devices
 
Typical components which can be heated with the IH 210
· Rolling bearings
· Gears
· Gear rims
· Shrink rings
· Pistons
· Bushings
· Sleeves
· Clutch parts

Materials which can be heated well
· Structural steel
· Ball bearing steel
· Grey cast iron
· Cast steel

*Lead time: 3 to 4 weeks upon order confirmation

simatherm Bearing BInduction Heater IH 210, 400-460V Heat large rolling bearings up to 300 kgThe most powerful table-top heater The IH 210 is suitable for heating large workpieces and rolling bearings weighing up to 300 kg. The IH 210 is supplied with two yokes as standard. The sliding yoke allows easy loading and unloading of the bearing. · For rolling bearings weighing up to 300 kg · Extremely simple operation thanks to the sliding yoke · Available for voltages of 200, 400–480 and 500–575 V · Induction coil outside of the housing, shortens the heating times and reduces energy consumption · Particularly compact design - including the yokes only 75 kg in weight · Automatic demagnetization · 5-stage power consumption in combination with smaller yokes, allows smaller bearings to heat up safely and quickly with less energy · For workpieces with an inner diameter of 60 to 640 mm · Can heat a 210 kg bearing from 20 °C to 110 °C in 20 minutes, thus saving time and energy · 3 year manufacturer warranty Technical data for simather IH 210 Designation: Heater for large workpieces Voltage V / Hz / power: - 400 V / 50 Hz / 10.0 kVA - 440–480 V / 50–60 Hz / 11.5 kVA - 575 V / 60 Hz / 10.4 kVA Workpiece: - Maximum weight: 300 kg - Bore diameter: From 60 mm inner diameter to 640 mm outer diameter Temperature control: - Range: 0 – 250°C - Magnetic probe: yes, type K - Accuracy (electronic): ± 3°C Time control: - Range: 0 – 60 minutes - Accuracy: ± 0.01 seconds Maximum temperature (approx.): 250°C Thermometer mode: yes Bearing temperature mode: yes Power level: 5 levels / 20-40-60-80-100% Automatic demagnetization / residual magnetism: yes / &lt; 2A/cm Suitable for heating sealed bearings: yes Suitable for heating pre-greased bearings: yes Error guide codes: yes Thermal magnetic flux: yes Maximum magnetic flux: 1.5 T Control panel: Keyboard with LED-display Size of the operating area (WxH): 250 x 250 mm Coil diameter: 135 mm Measurements (LxWxH): 600 x 350 x 420 mm Overall weight including yokes: 75 kg Number of standard yokes: 2 Standard yokes: - 70 x 70 x 420 mm for bearings with a bore diameter of at least 100 mm - 40 x 40 x 420 mm for bearings with a bore diameter of at least 60 mm Core cross-section: 70 x 70 mm Yoke storage: yes, integrated Cooling fan: optional Sliding yoke: yes Housing material: aluminum Scope of delivery · 1x simatherm IH 210 · 1x User manual · 1x Temperature probe · 1x Power cord · 1x Protective gloves · 1x Sliding yoke 70 x 70 for bearings with bore diameter from 100 mm · 1x Yoke 40 x 40 for bearings with bore diameter from 60 mm Optional: · Yokes (14 x14 mm, 20 x 20 mm, 28 x 28 mm, 40 x 40 mm, 55 x 55 mm Industry target groups and applications Fabrication and assembly · General mechanical engineering · Gearbox construction (vehicles and industry) · Pumps · Hydraulic equipment · Electric motor construction · Conveyor and conveying systems General operations maintenance · Metal processing industry · Paper and cardboard factories · Textile industry · Larger printing plants · Food industry · Building services · Vehicles (buses, trucks, rail vehicles) · Construction machinery · Forklifts, storage equipment/lifting devices Typical components which can be heated with the IH 210 · Rolling bearings · Gears · Gear rims · Shrink rings · Pistons · Bushings · Sleeves · Clutch parts Materials which can be heated well · Structural steel · Ball bearing steel · Grey cast iron · Cast steel*Lead time: 3 to 4 weeks upon order confirmation<figure class="md-block-image md-block-image-has-caption"><img src="https://storage.googleapis.com/eezee-product-images/s1kybNXRhBctdkyZtOjuEV.jpg" alt="
 " /><figcaption class="md-block-image-caption"> </figcaption></figure><figure class="md-block-image"><img src="https://storage.googleapis.com/eezee-product-images/JyODLzjFEAaaQ1E35iMtnL.jpg" alt="" /><figcaption class="md-block-image-caption"></figcaption></figure>

simatherm Bearing BInduction Heater IH 210, 400-460V 
Heat large rolling bearings up to 300 kg
The most powerful table-top heater 
The IH 210 is suitable for heating large workpieces and rolling bearings weighing up to 300 kg. The IH 210 is supplied with two yokes as standard. The sliding yoke allows easy loading and unloading of the bearing.&nbsp;
· For rolling bearings weighing up to 300 kg 
· Extremely simple operation thanks to the sliding yoke 
· Available for voltages of 200, 400–480 and 500–575 V 
· Induction coil outside of the housing, shortens the heating times and reduces energy consumption 
· Particularly compact design - including the yokes only 75 kg in weight 
· Automatic demagnetization 
· 5-stage power consumption in combination with smaller yokes, allows smaller bearings to heat up safely and quickly with less energy 
· For workpieces with an inner diameter of 60 to 640 mm 
· Can heat a 210 kg bearing from 20 °C to 110 °C in 20 minutes, thus saving time and energy 
· 3 year manufacturer warranty&nbsp;
<ins>Technical data for simather IH 210</ins>&nbsp;
Designation: Heater for large workpieces 
Voltage V / Hz / power: 
- 400 V / 50 Hz / 10.0 kVA 
- 440–480 V / 50–60 Hz / 11.5 kVA 
- 575 V / 60 Hz / 10.4 kVA 
Workpiece: 
- Maximum weight: 300 kg 
- Bore diameter: From 60 mm inner diameter to 640 mm outer diameter 
Temperature control: 
- Range: 0 – 250°C 
- Magnetic probe: yes, type K 
- Accuracy (electronic): ± 3°C 
Time control: 
- Range: 0 – 60 minutes 
- Accuracy: ± 0.01 seconds 
Maximum temperature (approx.): 250°C 
Thermometer mode: yes 
Bearing temperature mode: yes 
Power level: 5 levels / 20-40-60-80-100% 
Automatic demagnetization / residual magnetism: yes / &lt; 2A/cm 
Suitable for heating sealed bearings: yes 
Suitable for heating pre-greased bearings: yes 
Error guide codes: yes 
Thermal magnetic flux: yes 
Maximum magnetic flux: 1.5 T 
Control panel: Keyboard with LED-display 
Size of the operating area (WxH): 250 x 250 mm 
Coil diameter: 135 mm 
Measurements (LxWxH): 600 x 350 x 420 mm 
Overall weight including yokes: 75 kg 
Number of standard yokes: 2 
Standard yokes: 
- 70 x 70 x 420 mm for bearings with a bore diameter of at least 100 mm 
- 40 x 40 x 420 mm for bearings with a bore diameter of at least 60 mm 
Core cross-section: 70 x 70 mm 
Yoke storage: yes, integrated 
Cooling fan: optional 
Sliding yoke: yes 
Housing material: aluminum&nbsp;
<ins>Scope of delivery</ins> 
· 1x simatherm IH 210 
· 1x User manual 
· 1x Temperature probe 
· 1x Power cord 
· 1x Protective gloves 
· 1x Sliding yoke 70 x 70 for bearings with bore diameter from 100 mm 
· 1x Yoke 40 x 40 for bearings with bore diameter from 60 mm&nbsp;
Optional: · Yokes (14 x14 mm, 20 x 20 mm, 28 x 28 mm, 40 x 40 mm, 55 x 55 mm&nbsp;
Industry target groups and applications&nbsp;
&nbsp;<ins>Fabrication and assembly</ins> 
· General mechanical engineering 
· Gearbox construction (vehicles and industry) 
· Pumps 
· Hydraulic equipment 
· Electric motor construction 
· Conveyor and conveying systems 
 
<ins>General operations maintenance</ins> 
· Metal processing industry 
· Paper and cardboard factories 
· Textile industry 
· Larger printing plants 
· Food industry 
· Building services 
· Vehicles (buses, trucks, rail vehicles) 
· Construction machinery 
· Forklifts, storage equipment/lifting devices 
 
<ins>Typical components which can be heated with the IH 210</ins> 
· Rolling bearings 
· Gears 
· Gear rims 
· Shrink rings 
· Pistons 
· Bushings 
· Sleeves 
· Clutch parts 
 
<ins>Materials which can be heated well</ins> 
· Structural steel 
· Ball bearing steel 
· Grey cast iron 
· Cast steel
*Lead time: 3 to 4 weeks upon order confirmation

 <div class="img-ctnr">
 <amp-img 
 on="tap:74sn7"
 tabindex="0"
 role="button"
 class="contain"
 layout="fill"
 src="https://storage.googleapis.com/eezee-product-images/s1kybNXRhBctdkyZtOjuEV.jpg"
 ></amp-img>
 </div>
 
 <amp-image-lightbox 
 id="74sn7" 
 layout="nodisplay"></amp-image-lightbox>

 

 <div class="img-ctnr">
 <amp-img 
 on="tap:9k098"
 tabindex="0"
 role="button"
 class="contain"
 layout="fill"
 src="https://storage.googleapis.com/eezee-product-images/JyODLzjFEAaaQ1E35iMtnL.jpg"
 ></amp-img>
 </div>
 
 <amp-image-lightbox 
 id="9k098" 
 layout="nodisplay"></amp-image-lightbox>

Technical Data

simatherm & simatool product catalog

Silver

Simalube

Lubricants

Silver 

buyerIntroduction

Simatherm Bearing Induction Heater Ih 210 (400-460V, up to 300kg)

simatherm bearing induction heater ih 210 (400-460v, 300kg) pemanas induksi bantalan hingga heaters aruhan galas sehingga simatherm/西马瑟姆 轴承感应加热器 210（400-460v，最高 300kg） 西马瑟姆

simatherm-bearing-induction-heater-ih-210-400-460v-up-to-300kg

simatherm Induction Heater IH 070, 230V/50-60Hz
Heat small to medium-sized rolling bearings up to 120 kg

The popular all-round heater for flexible use
The IH 070 is suitable for heating small and medium-sized workpieces up to 120 kg. Due to the external induction coil, the unit works extremely efficiently. The power can be adjusted in four stages if required.

· For rolling bearings weighing up to 120 kg
· For workpieces with an inner diameter of 20 to 400 mm
· Swivel arm available as an option
· 5-stage power consumption combined with smaller yokes, allows smaller bearings to be heated safely and quickly with less energy
· Supplied with three yokes as standard
· Particularly compact design - including the yokes only 35 kg in weight
· 3 year manufacturer warranty
· Can heat a 65 kg bearing from 20 °C to 110 °C in 20 minutes, thus saving time and energy
· Automatic demagnetization


Technical data for simatherm IH 070
Designation: Heater for small to medium workpieces
Voltage V / Hz / power:
- 100 V / 50 – 60 Hz / 1.5 kVA
- 110 – 120 V / 60 Hz / 3.7 kVA
- 220 – 240 V / 50 – 60 Hz / 3.7 kVA
Workpiece:
- Maximum weight: 120 kg
- Bore diameter: From 20 mm inner diameter to 400 mm outer diameter
Temperature control: 
- Range: 0 – 250°C
- Magnetic probe: yes, type K
- Accuracy (electronic): ± 3°C
Time control:
Range: 0 – 60 minutes
Accuracy: ± 0.01 seconds
Maximum temperature (approx.): 250°C
Thermometer mode: yes
Bearing temperature mode: yes
Power level: 5 levels / 20-40-60-80-100%
Automatic demagnetization / residual magnetism: yes / < 2A/cm
Suitable for heating sealed bearings: yes
Suitable for heating pre-greased bearings: yes
Suitability for precision bearings: yes
Error guide codes: yes
Thermal overload protection: yes
Maximum magnetic flux: 1.5 T
Control panel: Keyboard wtih LED-display
Size of the operating area (WxH): 145 x 205 mm
Coil diameter: 115 mm
Measurements (LxWxH): 420 x 280 x 345 mm
Overall weight including yokes: 35 kg
Number of standard yokes: 3
Standard yokes:
- 55 x 55 x 275 mm for bearings with a bore diameter of at least 78 mm
- 28 x 28 x 275 mm for bearings with a bore diameter of at least 40 mm
- 14 x 14 x 275 mm for bearings with a bore diameter of at least 20 mm
Core cross-section: 55 x 55 mm
Yoke storage: yes, integrated
Swivel arm: optional
Housing material: aluminum


Scope of delivery
· 1x simatherm IH 070
· 1x User manual
· 1x Temperature probe
· 1x Protective gloves
· 1x Power cord
· 1x Yoke 14x14 for bearings with a bore diameter from 20 mm
· 1x Yoke 28x28 for bearings with a bore diameter from 40 mm
· 1x Yoke 55x55 for bearings with a bore diameter from 78 mm

Optional:
· Swivel arm
· Yoke adapter
· Yokes (10 x10 mm, 20 x 20 mm, 40 x 40 mm)


Industry target groups and applications

Fabrication and assembly
· General mechanical engineering
· Gearbox construction (vehicles and industry)
· Pumps
· Hydraulic equipment
· Electric motor construction
· Conveyor and conveying systems

General operations maintenance
· Metal processing industry
· Paper and cardboard factories
· Textile industry
· Larger printing plants
· Food industry
· Building services
· Vehicles (buses, trucks, rail vehicles)
· Construction machinery
· Forklifts, storage equipment / lifting devices

Typical components which can be heated with the IH 070
· Rolling bearings
· Gears
· Gear rims
· Shrink rings
· Pistons
· Bushings
· Sleeves
· Clutch parts

 Materials which can be heated well
· Structural steel
· Ball bearing steel
· Grey cast iron
· Cast steel

simatherm Induction Heater IH 070, 230V/50-60Hz Heat small to medium-sized rolling bearings up to 120 kg The popular all-round heater for flexible use The IH 070 is suitable for heating small and medium-sized workpieces up to 120 kg. Due to the external induction coil, the unit works extremely efficiently. The power can be adjusted in four stages if required.· For rolling bearings weighing up to 120 kg · For workpieces with an inner diameter of 20 to 400 mm · Swivel arm available as an option · 5-stage power consumption combined with smaller yokes, allows smaller bearings to be heated safely and quickly with less energy · Supplied with three yokes as standard · Particularly compact design - including the yokes only 35 kg in weight · 3 year manufacturer warranty · Can heat a 65 kg bearing from 20 °C to 110 °C in 20 minutes, thus saving time and energy · Automatic demagnetization Technical data for simatherm IH 070 Designation: Heater for small to medium workpieces Voltage V / Hz / power: - 100 V / 50 – 60 Hz / 1.5 kVA - 110 – 120 V / 60 Hz / 3.7 kVA - 220 – 240 V / 50 – 60 Hz / 3.7 kVA Workpiece: - Maximum weight: 120 kg - Bore diameter: From 20 mm inner diameter to 400 mm outer diameter Temperature control: - Range: 0 – 250°C - Magnetic probe: yes, type K - Accuracy (electronic): ± 3°C Time control: Range: 0 – 60 minutes Accuracy: ± 0.01 seconds Maximum temperature (approx.): 250°C Thermometer mode: yes Bearing temperature mode: yes Power level: 5 levels / 20-40-60-80-100% Automatic demagnetization / residual magnetism: yes / &lt; 2A/cm Suitable for heating sealed bearings: yes Suitable for heating pre-greased bearings: yes Suitability for precision bearings: yes Error guide codes: yes Thermal overload protection: yes Maximum magnetic flux: 1.5 T Control panel: Keyboard wtih LED-display Size of the operating area (WxH): 145 x 205 mm Coil diameter: 115 mm Measurements (LxWxH): 420 x 280 x 345 mm Overall weight including yokes: 35 kg Number of standard yokes: 3 Standard yokes: - 55 x 55 x 275 mm for bearings with a bore diameter of at least 78 mm - 28 x 28 x 275 mm for bearings with a bore diameter of at least 40 mm - 14 x 14 x 275 mm for bearings with a bore diameter of at least 20 mm Core cross-section: 55 x 55 mm Yoke storage: yes, integrated Swivel arm: optional Housing material: aluminum Scope of delivery · 1x simatherm IH 070 · 1x User manual · 1x Temperature probe · 1x Protective gloves · 1x Power cord · 1x Yoke 14x14 for bearings with a bore diameter from 20 mm · 1x Yoke 28x28 for bearings with a bore diameter from 40 mm · 1x Yoke 55x55 for bearings with a bore diameter from 78 mm Optional: · Swivel arm · Yoke adapter · Yokes (10 x10 mm, 20 x 20 mm, 40 x 40 mm) Industry target groups and applications Fabrication and assembly · General mechanical engineering · Gearbox construction (vehicles and industry) · Pumps · Hydraulic equipment · Electric motor construction · Conveyor and conveying systems General operations maintenance · Metal processing industry · Paper and cardboard factories · Textile industry · Larger printing plants · Food industry · Building services · Vehicles (buses, trucks, rail vehicles) · Construction machinery · Forklifts, storage equipment / lifting devices Typical components which can be heated with the IH 070 · Rolling bearings · Gears · Gear rims · Shrink rings · Pistons · Bushings · Sleeves · Clutch parts Materials which can be heated well · Structural steel · Ball bearing steel · Grey cast iron · Cast steel*Lead time: 3 to 4 weeks upon order confirmation <figure class="md-block-image"><img src="https://storage.googleapis.com/eezee-product-images/Ljsca2TLbC8PlDdp0lZA3_.jpg" alt="" /><figcaption class="md-block-image-caption"></figcaption></figure><figure class="md-block-image"><img src="https://storage.googleapis.com/eezee-product-images/V59TT11LP0Di3MYHBcNCp4.jpg" alt="" /><figcaption class="md-block-image-caption"></figcaption></figure>

simatherm Induction Heater IH 070, 230V/50-60Hz 
Heat small to medium-sized rolling bearings up to 120 kg 
 
The popular all-round heater for flexible use 
The IH 070 is suitable for heating small and medium-sized workpieces up to 120 kg. Due to the external induction coil, the unit works extremely efficiently. The power can be adjusted in four stages if required.
· For rolling bearings weighing up to 120 kg 
· For workpieces with an inner diameter of 20 to 400 mm 
· Swivel arm available as an option 
· 5-stage power consumption combined with smaller yokes, allows smaller bearings to be heated safely and quickly with less energy 
· Supplied with three yokes as standard 
· Particularly compact design - including the yokes only 35 kg in weight 
· 3 year manufacturer warranty 
· Can heat a 65 kg bearing from 20 °C to 110 °C in 20 minutes, thus saving time and energy 
· Automatic demagnetization 
 
 
<ins>Technical data for simatherm IH 070</ins> 
Designation: Heater for small to medium workpieces 
Voltage V / Hz / power: 
- 100 V / 50 – 60 Hz / 1.5 kVA 
- 110 – 120 V / 60 Hz / 3.7 kVA 
- 220 – 240 V / 50 – 60 Hz / 3.7 kVA 
Workpiece: 
- Maximum weight: 120 kg 
- Bore diameter: From 20 mm inner diameter to 400 mm outer diameter 
Temperature control: 
- Range: 0 – 250°C 
- Magnetic probe: yes, type K 
- Accuracy (electronic): ± 3°C 
Time control: 
Range: 0 – 60 minutes 
Accuracy: ± 0.01 seconds 
Maximum temperature (approx.): 250°C 
Thermometer mode: yes 
Bearing temperature mode: yes 
Power level: 5 levels / 20-40-60-80-100% 
Automatic demagnetization / residual magnetism: yes / &lt; 2A/cm 
Suitable for heating sealed bearings: yes 
Suitable for heating pre-greased bearings: yes 
Suitability for precision bearings: yes 
Error guide codes: yes 
Thermal overload protection: yes 
Maximum magnetic flux: 1.5 T 
Control panel: Keyboard wtih LED-display 
Size of the operating area (WxH): 145 x 205 mm 
Coil diameter: 115 mm 
Measurements (LxWxH): 420 x 280 x 345 mm 
Overall weight including yokes: 35 kg 
Number of standard yokes: 3 
Standard yokes: 
- 55 x 55 x 275 mm for bearings with a bore diameter of at least 78 mm 
- 28 x 28 x 275 mm for bearings with a bore diameter of at least 40 mm 
- 14 x 14 x 275 mm for bearings with a bore diameter of at least 20 mm 
Core cross-section: 55 x 55 mm 
Yoke storage: yes, integrated 
Swivel arm: optional 
Housing material: aluminum 
 
 
<ins>Scope of delivery</ins> 
· 1x simatherm IH 070 
· 1x User manual 
· 1x Temperature probe 
· 1x Protective gloves 
· 1x Power cord 
· 1x Yoke 14x14 for bearings with a bore diameter from 20 mm 
· 1x Yoke 28x28 for bearings with a bore diameter from 40 mm 
· 1x Yoke 55x55 for bearings with a bore diameter from 78 mm 
 
Optional: 
· Swivel arm 
· Yoke adapter 
· Yokes (10 x10 mm, 20 x 20 mm, 40 x 40 mm) 
 
 
Industry target groups and applications 
 
<ins>Fabrication and assembly</ins> 
· General mechanical engineering 
· Gearbox construction (vehicles and industry) 
· Pumps 
· Hydraulic equipment 
· Electric motor construction 
· Conveyor and conveying systems 
 
<ins>General operations maintenance</ins> 
· Metal processing industry 
· Paper and cardboard factories 
· Textile industry 
· Larger printing plants 
· Food industry 
· Building services 
· Vehicles (buses, trucks, rail vehicles) 
· Construction machinery 
· Forklifts, storage equipment / lifting devices 
 
<ins>Typical components which can be heated with the IH 070</ins> 
· Rolling bearings 
· Gears 
· Gear rims 
· Shrink rings 
· Pistons 
· Bushings 
· Sleeves 
· Clutch parts 
 
 <ins>Materials which can be heated well</ins> 
· Structural steel 
· Ball bearing steel 
· Grey cast iron 
· Cast steel
*Lead time: 3 to 4 weeks upon order confirmation


 <div class="img-ctnr">
 <amp-img 
 on="tap:eufju"
 tabindex="0"
 role="button"
 class="contain"
 layout="fill"
 src="https://storage.googleapis.com/eezee-product-images/Ljsca2TLbC8PlDdp0lZA3_.jpg"
 ></amp-img>
 </div>
 
 <amp-image-lightbox 
 id="eufju" 
 layout="nodisplay"></amp-image-lightbox>

 

 <div class="img-ctnr">
 <amp-img 
 on="tap:ee0am"
 tabindex="0"
 role="button"
 class="contain"
 layout="fill"
 src="https://storage.googleapis.com/eezee-product-images/V59TT11LP0Di3MYHBcNCp4.jpg"
 ></amp-img>
 </div>
 
 <amp-image-lightbox 
 id="ee0am" 
 layout="nodisplay"></amp-image-lightbox>

Simatherm Bearing Induction Heater Ih 070 (up to 120kg)

simatherm bearing induction heater ih 070 (up 120kg) pemanas induksi bantalan (hingga heaters radiators aruhan galas (sehingga simatherm/西马瑟姆 轴承感应加热器 070（最大 120kg） 西马瑟姆

simatherm-bearing-induction-heater-ih-070-up-to-120kg

RS Pro

Screw

O Ring

Surface Mount Resistors

Circular Connectors

Bolts

Panel Mount Indicators 

Junction & Enclosure Box

Electrical Wire 

Button Switch

RS Components ETH SG

Schneider Electric LC1D65AF7TQ Lc Series Contactor, 110 V Ac Coil, 3-Pole, 65 A, 37 Kw, 3NO, 440 V (1 Box of 10)

schneider electric lc1d65af7tq lc series contactor, 110 ac coil, 3-pole, 65 a, 37 kw, 3no, 440 (1 box 10) kontaktor seri lc, kumparan v, kutub, kotak berisi contactors para kontraktor penyentuh siri lc1d65af7tq, gegelung 3-tiang, penghubung electric/施耐德电气 系列接触器，110 交流线圈，3 极，65 a，37 kw，3no，440 v（1 10 个） 接触器 施耐德电气

schneider-electric-lc1d65af7tq-lc-series-contactor-110-v-ac-coil-3-pole-65-a-37-kw-3no-440-v-1-box-of-10

Schneider Electric LC2D115F7 Contactor, 110 V Ac Coil, 3-Pole, 115 A, 65 Kw, 1NC + 1NO

schneider electric lc2d115f7 contactor, 110 ac coil, 3-pole, 115 a, 65 kw, 1nc 1no kontaktor lc2d115f7, kumparan v, kutub, contactors para kontraktor penyentuh gegelung 3-tiang, penghubung electric/施耐德电气 接触器，110 交流线圈，3 极，115 a，65 kw，1nc 接触器 施耐德电气

schneider-electric-lc2d115f7-contactor-110-v-ac-coil-3-pole-115-a-65-kw-1nc-1no

Schneider Electric LC2D65AEHE LC2D Series Reversing Contactor, 110 V ac/dc Coil, 3-Pole, 65 A, 30 Kw, 3NO, 690 V Ac

schneider electric lc2d65aehe lc2d series reversing contactor, 110 ac/dc coil, 3-pole, 65 a, 30 kw, 3no, 690ac kontaktor pembalik seri lc2d, koil ac/dc, kutub, contactors para kontraktor penyentuh terbalik siri gegelung 3-tiang, penghubung electric/施耐德电气 系列换向接触器，110 交流/直流线圈，3 极，65 a，30 kw，3no，690 交流 接触器 施耐德电气

schneider-electric-lc2d65aehe-lc2d-series-reversing-contactor-110-v-ac-dc-coil-3-pole-65-a-30-kw-3no-690-v-ac

Schneider Electric LC2D65AF7 LC2D Series Contactor, 110 V Ac Coil, 3-Pole, 37 Kw, 300 V Dc, 690 V Ac

schneider electric lc2d65af7 lc2d series contactor, 110 ac coil, 3-pole, 37 kw, 300 dc, 690 kontaktor seri lc2d, kumparan v, kutub, contactors para kontraktor penyentuh siri lc2d65af7, gegelung penghubung electric/施耐德电气 系列接触器，110 交流线圈，3 极，37 kw，300 直流，690 交流 接触器 施耐德电气

schneider-electric-lc2d65af7-lc2d-series-contactor-110-v-ac-coil-3-pole-37-kw-300-v-dc-690-v-ac

Schneider Electric LC2D65AFE7 LC2D Series Contactor, 110 V Ac Coil, 3-Pole, 65 A, 30 Kw, 3NO, 690 V Ac

schneider electric lc2d65afe7 lc2d series contactor, 110 ac coil, 3-pole, 65 a, 30 kw, 3no, 690 kontaktor seri lc2d, kumparan v, kutub, contactors para kontraktor penyentuh siri lc2d65afe7, gegelung penghubung electric/施耐德电气 系列接触器，110 交流线圈，3 极，65 a，30 kw，3no，690 交流 接触器 施耐德电气

schneider-electric-lc2d65afe7-lc2d-series-contactor-110-v-ac-coil-3-pole-65-a-30-kw-3no-690-v-ac

Schneider Electric LC1D115FD Contactor, 110 V Dc Coil, 3-Pole, 115 A, 65 Kw, 1NC + 1NO

schneider electric lc1d115fd contactor, 110 dc coil, 3-pole, 115 a, 65 kw, 1nc 1no kontaktor lc1d115fd, kumparan v, kutub, contactors para kontraktor penyentuh gegelung penghubung electric/施耐德电气 接触器，110 直流线圈，3 极，115 a，65 kw，1nc 接触器 施耐德电气

schneider-electric-lc1d115fd-contactor-110-v-dc-coil-3-pole-115-a-65-kw-1nc-1no

Schneider Electric LC1D656FWS207 Reversing Contactor, 110 V Dc Coil, 3-Pole, 65 A, 37 Kw, 3NO

schneider electric lc1d656fws207 reversing contactor, 110 dc coil, 3-pole, 65 a, 37 kw, 3no kontaktor pembalik, kumparan v, kutub, contactors para kontraktor penyentuh terbalik, gegelung penghubung electric/施耐德电气 换向接触器，110 直流线圈，3 极，65 a，37 kw，3no 接触器 施耐德电气

schneider-electric-lc1d656fws207-reversing-contactor-110-v-dc-coil-3-pole-65-a-37-kw-3no

Schneider Electric LC1D80FD Contactor, 110 V Dc Coil, 3-Pole, 80 A, 45 Kw, 1NC + 1NO

schneider electric lc1d80fd contactor, 110 dc coil, 3-pole, 80 a, 45 kw, 1nc 1no kontaktor lc1d80fd, kumparan v, kutub, contactors para kontraktor penyentuh gegelung 3-tiang, penghubung electric/施耐德电气 接触器，110 直流线圈，3 极，80 a，45 kw，1nc 接触器 施耐德电气

schneider-electric-lc1d80fd-contactor-110-v-dc-coil-3-pole-80-a-45-kw-1nc-1no

Schneider Electric LC1D65A3F7 LC1D Series Contactor, 110 V Ac Coil, 3-Pole, 65 A, 3NO

schneider electric lc1d65a3f7 lc1d series contactor, 110 ac coil, 3-pole, 65 a, 3no kontaktor seri lc1d, kumparan v, kutub, contactors para kontraktor penyentuh siri lc1d65a3f7, gegelung penghubung electric/施耐德电气 系列接触器，110 交流线圈，3 极，65 a，3no 接触器 施耐德电气

schneider-electric-lc1d65a3f7-lc1d-series-contactor-110-v-ac-coil-3-pole-65-a-3no

Schneider Electric LC1D65AG7 LC1D Series Contactor, 110 V Ac Coil, 3-Pole, 65 A, 30 Kw, 3NO, 600 V Ac

schneider electric lc1d65ag7 lc1d series contactor, 110 ac coil, 3-pole, 65 a, 30 kw, 3no, 600 kontaktor seri lc1d, kumparan v, kutub, contactors para kontraktor penyentuh siri lc1d65ag7, gegelung penghubung electric/施耐德电气 系列接触器，110 交流线圈，3 极，65 a，30 kw，3no，600 交流 接触器 施耐德电气

schneider-electric-lc1d65ag7-lc1d-series-contactor-110-v-ac-coil-3-pole-65-a-30-kw-3no-600-v-ac

Schneider Electric LC1D65AF7 LC1D Series Contactor, 110 V Ac Coil, 3-Pole, 65 A, 30 Kw, 3NO, 690 V Ac

schneider electric lc1d65af7 lc1d series contactor, 110 ac coil, 3-pole, 65 a, 30 kw, 3no, 690 kontaktor seri lc1d, kumparan v, kutub, contactors para kontraktor penyentuh siri lc1d65af7, gegelung penghubung electric/施耐德电气 系列接触器，110 交流线圈，3 极，65 a，30 kw，3no，690 交流 接触器 施耐德电气

schneider-electric-lc1d65af7-lc1d-series-contactor-110-v-ac-coil-3-pole-65-a-30-kw-3no-690-v-ac

Schneider Electric LC1D65AF7 Tesys D Contactor - 3P(3 No) - AC-3 - <lt/>= 440 V 65 a - 110 V Ac 50/60 Hz Coil

TeSys   Deca contactor, 3 poles (3NO), for motor control applications up to 65A/440V   AC-3/3e (30kW@400V). It provides a   110V 50/60Hz AC coil, 1NO+1NC built-in auxiliary contacts (NC mirror   certified), power connection by EverLink BTR screw connectors, control   connection by screw clamp terminals. For operating rates until 3600   cycles/hour and environments until 60°C, it procures high reliability and   durability. Compact (55mm width), DIN-rail mounting or screw fixing. Multi standards certified (IEC, UL, CSA,   CCC, EAC, Marine), Green Premium compliant (RoHS/REACh).     

Schneider Electric LC1D65AF7 Tesys D Contactor - 3P(3 No) - AC-3 - &lt;lt/&gt;= 440 V 65 a - 110 V Ac 50/60 Hz Coil TeSys Deca contactor, 3 poles (3NO), for motor control applications up to 65A/440V AC-3/3e (30kW@400V). It provides a 110V 50/60Hz AC coil, 1NO+1NC built-in auxiliary contacts (NC mirror certified), power connection by EverLink BTR screw connectors, control connection by screw clamp terminals. For operating rates until 3600 cycles/hour and environments until 60°C, it procures high reliability and durability. Compact (55mm width), DIN-rail mounting or screw fixing. Multi standards certified (IEC, UL, CSA, CCC, EAC, Marine), Green Premium compliant (RoHS/REACh).

Schneider Electric LC1D65AF7 Tesys D Contactor - 3P(3 No) - AC-3 - &lt;lt/&gt;= 440 V 65 a - 110 V Ac 50/60 Hz Coil 
TeSys Deca contactor, 3 poles (3NO), for motor control applications up to 65A/440V AC-3/3e (30kW@400V). It provides a 110V 50/60Hz AC coil, 1NO+1NC built-in auxiliary contacts (NC mirror certified), power connection by EverLink BTR screw connectors, control connection by screw clamp terminals. For operating rates until 3600 cycles/hour and environments until 60°C, it procures high reliability and durability. Compact (55mm width), DIN-rail mounting or screw fixing. Multi standards certified (IEC, UL, CSA, CCC, EAC, Marine), Green Premium compliant (RoHS/REACh).&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;

Data Sheet

Jimmy Foo

Philips

Thomas & Betts

BRADY

Bussmann

Weidmuller

FUJI

Crouse-Hinds

Circuit Breaker

Fuses & Fusegear

Plugs & Connector 

Light Bulbs

Led Lights

Other Electrical Accessories

Light Tubes

Doreen Tan

Schneider Electric LC1D65AF7 Tesys D Contactor - 3P(3 No) - AC-3 - <lt/>= 440 V 65 a - 110 V Ac 50/60 Hz Coil

schneider electric lc1d65af7 tesys contactor 3p(3 no) ac-3 <lt/>= 440 65 110ac 50/60 hz coil kontaktor contactors para kontraktor gegelung penghubung electric/施耐德电气 接触器 3p（3 无） 线圈 施耐德电气

schneider-electric-lc1d65af7-tesys-d-contactor-3p-3-no-ac-3-lt-440-v-65-a-110-v-ac-50-60-hz-coil

Schneider Electric LC1D323F7 Contactor, 110 V Coil, 3-Pole, 32 A, 7.5 Kw, 3NO

schneider electric lc1d323f7 contactor, 110 coil, 3-pole, 32 a, 7.5 kw, 3no kontaktor lc1d323f7, koil v, kutub, 7,5 contactors para kontraktor penyentuh gegelung 3-kutub, penghubung electric/施耐德电气 接触器，110 线圈，3 极，32 a，7.5 kw，3no 接触器 施耐德电气

schneider-electric-lc1d323f7-contactor-110-v-coil-3-pole-32-a-7-5-kw-3no

Schneider Electric LE1D12F7 Dol Starter, Dol, 7.5 Kw, 110 V Ac, 3 Phase, IP65

schneider electric le1d12f7 dol starter, dol, 7.5 kw, 110 ac, phase, ip65 7,5 fase, motor starter fasa, electric/施耐德电气 启动器，dol，7.5 kw，110 交流，3 相，ip65 施耐德电气

schneider-electric-le1d12f7-dol-starter-dol-7-5-kw-110-v-ac-3-phase-ip65

Schneider Electric LC2K0901F72 LC2K Series Contactor, 110 V Ac Coil, 3-Pole, 20 A, 4 Kw, 3NO, 690 V Ac

schneider electric lc2k0901f72 lc2k series contactor, 110 ac coil, 3-pole, 20 a, kw, 3no, 690 kontaktor seri lc2k, kumparan v, kutub, contactors para kontraktor penyentuh siri gegelung penghubung electric/施耐德电气 系列接触器，110 交流线圈，3 极，20 a，4 kw，3no，690 交流 接触器 施耐德电气

schneider-electric-lc2k0901f72-lc2k-series-contactor-110-v-ac-coil-3-pole-20-a-4-kw-3no-690-v-ac

Abb AX40-30-10-80 Contactor 3P 11KW 3NO 1AUX 50/60HZ 230-240VAC

Catalog Description:AX40-30-10-80 220-230V50Hz/230-240V60Hz Contactor

Long Description:AX32, AX40 contactors are mainly used for controlling 3-phase motors and power circuits up to 690 V AC. These contactors are of the block type design with: – 3 main poles and 1 built-in auxiliary contact – control circuit: AC operated – add-on auxiliary contact blocks for front or side mounting and a wide range of accessories.

Rated Operational Voltage:Auxiliary Circuit 690 V

Rated Frequency (f):Auxiliary Circuit 50 / 60 Hz

Conventional Free-air Thermal Current (Ith):acc. to IEC 60947-4-1, Open Contactors Θ = 40 °C 65 A

Rated Operational Current AC-1 (Ie):(220 / 240 V) 55 °C 60 A

Rated Operational Current AC-3 (Ie):(415 V) 55 °C 40 A

Rated Operational Power AC-3 (Pe):(415 V) 18.5 kW

Rated Operational Current AC-15 (Ie):(500 V) NC 2

Rated Short-time Withstand Current Low Voltage (Icw):at 40 °C Ambient Temp, in Free Air, from a Cold State 10 s 400 A

at 40 °C Ambient Temp, in Free Air, from a Cold State 15 min 65 A

at 40 °C Ambient Temp, in Free Air, from a Cold State 1 min 150 A

at 40 °C Ambient Temp, in Free Air, from a Cold State 1 s 600 A

at 40 °C Ambient Temp, in Free Air, from a Cold State 30 s 225 A

Maximum Breaking Capacity:cos phi=0.45 (cos phi=0.35 for Ie > 100 A) at 440 V 820 A

cos phi=0.45 (cos phi=0.35 for Ie > 100 A) at 690 V 340 A

Maximum Electrical Switching Frequency:(AC-1) 600 cycles per hour

Rated Operational Current DC-13 (Ie):(24 V) 6 A / 144 W

Rated Insulation Voltage (Ui):acc. to IEC 60947-4-1 and VDE 0110 (Gr. C) 690 V

Rated Impulse Withstand Voltage (Uimp):Auxiliary Circuit 6 kV

Maximum Mechanical Switching Frequency:3600 cycles per hour

Rated Control Circuit Voltage (Uc):50 Hz 220 ... 230 V

Operate Time:Between Coil De-energization and NC Contact Closing 7 ... 14 ms

Between Coil De-energization and NO Contact Opening 4 ... 11 ms

Between Coil Energization and NC Contact Opening 6 ... 18 ms

Between Coil Energization and NO Contact Closing 8 ... 21 ms

Degree of Protection:acc. to IEC 60529, IEC 60947-1, EN 60529 Auxiliary Terminals IP20

acc. to IEC 60529, IEC 60947-1, EN 60529 Coil Terminals IP20

acc. to IEC 60529, IEC 60947-1, EN 60529 Main Terminals IP20

<h3 class="md-block-header-three">Abb AX40-30-10-80 Contactor 3P 11KW 3NO 1AUX 50/60HZ 230-240VAC</h3> <ul class="md-block-unordered-list-item"><li>Extended Product Type:AX40-30-10-80</li><li>Product ID:1SBL321074R8010</li><li>EAN:3471522401809</li><li>Catalog Description:AX40-30-10-80 220-230V50Hz/230-240V60Hz Contactor</li><li>Long Description:AX32, AX40 contactors are mainly used for controlling 3-phase motors and power circuits up to 690 V AC. These contactors are of the block type design with: – 3 main poles and 1 built-in auxiliary contact – control circuit: AC operated – add-on auxiliary contact blocks for front or side mounting and a wide range of accessories.</li><li>Number of Main Contacts NO:3</li><li>Number of Main Contacts NC:0</li><li>Number of Auxiliary Contacts NO:1</li><li>Number of Auxiliary Contacts NC:0</li><li>Rated Operational Voltage:Auxiliary Circuit 690 V</li><li>Main Circuit 690 V</li><li>Rated Frequency (f):Auxiliary Circuit 50 / 60 Hz</li><li>Main Circuit 50 / 60 Hz</li><li>Conventional Free-air Thermal Current (Ith):acc. to IEC 60947-4-1, Open Contactors Θ = 40 °C 65 A</li><li>acc. to IEC 60947-5-1, Θ = 40 °C 16 A</li><li>Rated Operational Current AC-1 (Ie):(220 / 240 V) 55 °C 60 A</li><li>(690 V) 40 °C 60 A</li><li>(690 V) 70 °C 42 A</li><li>Rated Operational Current AC-3 (Ie):(415 V) 55 °C 40 A</li><li>(440 V) 55 °C 37 A</li><li>(500 V) 55 °C 33 A</li><li>(690 V) 55 °C 25 A</li><li>(380 / 400 V) 55 °C 40 A</li><li>(220 / 230 / 240 V) 55 °C 40 A</li><li>Rated Operational Power AC-3 (Pe):(415 V) 18.5 kW</li><li>(440 V) 22 kW</li><li>(500 V) 22 kW</li><li>(690 V) 22 kW</li><li>(380 / 400 V) 18.5 kW</li><li>(220 / 230 / 240 V) 11 kW</li><li>Rated Operational Current AC-15 (Ie):(500 V) NC 2</li><li>(500 V) 2 A</li><li>(690 V) 2 A</li><li>(24 / 127 V) 6 A</li><li>(220 / 240 V) 4 A</li><li>(380 / 400 V) 3 A</li><li>(400 / 440 V) 2 A</li><li>Rated Short-time Withstand Current Low Voltage (Icw):at 40 °C Ambient Temp, in Free Air, from a Cold State 10 s 400 A</li><li>at 40 °C Ambient Temp, in Free Air, from a Cold State 15 min 65 A</li><li>at 40 °C Ambient Temp, in Free Air, from a Cold State 1 min 150 A</li><li>at 40 °C Ambient Temp, in Free Air, from a Cold State 1 s 600 A</li><li>at 40 °C Ambient Temp, in Free Air, from a Cold State 30 s 225 A</li><li>for 0.1 s 140 A</li><li>for 1 s 100 A</li><li>Maximum Breaking Capacity:cos phi=0.45 (cos phi=0.35 for Ie &gt; 100 A) at 440 V 820 A</li><li>cos phi=0.45 (cos phi=0.35 for Ie &gt; 100 A) at 690 V 340 A</li><li>Maximum Electrical Switching Frequency:(AC-1) 600 cycles per hour</li><li>(AC-15) 1200 cycles per hour</li><li>(AC-3) 1200 cycles per hour</li><li>(DC-13) 900 cycles per hour</li><li>Rated Operational Current DC-13 (Ie):(24 V) 6 A / 144 W</li><li>(110 V) 1.1 A / 121 W</li><li>(125 V) 1.1 A / 138 W</li><li>(220 V) 0.55 A / 121 W</li><li>(250 V) 0.55 A / 138 W</li><li>(400 V) 2.8 A / 134 W</li><li>(500 V) 2 A / 144 W</li><li>Rated Insulation Voltage (Ui):acc. to IEC 60947-4-1 and VDE 0110 (Gr. C) 690 V</li><li>Rated Impulse Withstand Voltage (Uimp):Auxiliary Circuit 6 kV</li><li>Maximum Mechanical Switching Frequency:3600 cycles per hour</li><li>Rated Control Circuit Voltage (Uc):50 Hz 220 ... 230 V</li><li>60 Hz 230 ... 240 V</li><li>Operate Time:Between Coil De-energization and NC Contact Closing 7 ... 14 ms</li><li>Between Coil De-energization and NO Contact Opening 4 ... 11 ms</li><li>Between Coil Energization and NC Contact Opening 6 ... 18 ms</li><li>Between Coil Energization and NO Contact Closing 8 ... 21 ms</li><li>Degree of Protection:acc. to IEC 60529, IEC 60947-1, EN 60529 Auxiliary Terminals IP20</li><li>acc. to IEC 60529, IEC 60947-1, EN 60529 Coil Terminals IP20</li><li>acc. to IEC 60529, IEC 60947-1, EN 60529 Main Terminals IP20</li><li>IP20</li><li>Terminal Type:Screw Terminals</li><li>Unit of Measurement : Pcs</li></ul>

<h3>Abb AX40-30-10-80 Contactor 3P 11KW 3NO 1AUX 50/60HZ 230-240VAC</h3>
&nbsp;&nbsp;
<ul>
<li>Extended Product Type:AX40-30-10-80</li>
<li>Product ID:1SBL321074R8010</li>
<li>EAN:3471522401809</li>
<li>Catalog Description:AX40-30-10-80 220-230V50Hz/230-240V60Hz Contactor</li>
<li>Long Description:AX32, AX40 contactors are mainly used for controlling 3-phase motors and power circuits up to 690 V AC. These contactors are of the block type design with: – 3 main poles and 1 built-in auxiliary contact – control circuit: AC operated – add-on auxiliary contact blocks for front or side mounting and a wide range of accessories.</li>
<li>Number of Main Contacts NO:3</li>
<li>Number of Main Contacts NC:0</li>
<li>Number of Auxiliary Contacts NO:1</li>
<li>Number of Auxiliary Contacts NC:0</li>
<li>Rated Operational Voltage:Auxiliary Circuit 690 V</li>
<li>Main Circuit 690 V</li>
<li>Rated Frequency (f):Auxiliary Circuit 50 / 60 Hz</li>
<li>Main Circuit 50 / 60 Hz</li>
<li>Conventional Free-air Thermal Current (Ith):acc. to IEC 60947-4-1, Open Contactors Θ = 40 °C 65 A</li>
<li>acc. to IEC 60947-5-1, Θ = 40 °C 16 A</li>
<li>Rated Operational Current AC-1 (Ie):(220 / 240 V) 55 °C 60 A</li>
<li>(690 V) 40 °C 60 A</li>
<li>(690 V) 70 °C 42 A</li>
<li>Rated Operational Current AC-3 (Ie):(415 V) 55 °C 40 A</li>
<li>(440 V) 55 °C 37 A</li>
<li>(500 V) 55 °C 33 A</li>
<li>(690 V) 55 °C 25 A</li>
<li>(380 / 400 V) 55 °C 40 A</li>
<li>(220 / 230 / 240 V) 55 °C 40 A</li>
<li>Rated Operational Power AC-3 (Pe):(415 V) 18.5 kW</li>
<li>(440 V) 22 kW</li>
<li>(500 V) 22 kW</li>
<li>(690 V) 22 kW</li>
<li>(380 / 400 V) 18.5 kW</li>
<li>(220 / 230 / 240 V) 11 kW</li>
<li>Rated Operational Current AC-15 (Ie):(500 V) NC 2</li>
<li>(500 V) 2 A</li>
<li>(690 V) 2 A</li>
<li>(24 / 127 V) 6 A</li>
<li>(220 / 240 V) 4 A</li>
<li>(380 / 400 V) 3 A</li>
<li>(400 / 440 V) 2 A</li>
<li>Rated Short-time Withstand Current Low Voltage (Icw):at 40 °C Ambient Temp, in Free Air, from a Cold State 10 s 400 A</li>
<li>at 40 °C Ambient Temp, in Free Air, from a Cold State 15 min 65 A</li>
<li>at 40 °C Ambient Temp, in Free Air, from a Cold State 1 min 150 A</li>
<li>at 40 °C Ambient Temp, in Free Air, from a Cold State 1 s 600 A</li>
<li>at 40 °C Ambient Temp, in Free Air, from a Cold State 30 s 225 A</li>
<li>for 0.1 s 140 A</li>
<li>for 1 s 100 A</li>
<li>Maximum Breaking Capacity:cos phi=0.45 (cos phi=0.35 for Ie &gt; 100 A) at 440 V 820 A</li>
<li>cos phi=0.45 (cos phi=0.35 for Ie &gt; 100 A) at 690 V 340 A</li>
<li>Maximum Electrical Switching Frequency:(AC-1) 600 cycles per hour</li>
<li>(AC-15) 1200 cycles per hour</li>
<li>(AC-3) 1200 cycles per hour</li>
<li>(DC-13) 900 cycles per hour</li>
<li>Rated Operational Current DC-13 (Ie):(24 V) 6 A / 144 W</li>
<li>(110 V) 1.1 A / 121 W</li>
<li>(125 V) 1.1 A / 138 W</li>
<li>(220 V) 0.55 A / 121 W</li>
<li>(250 V) 0.55 A / 138 W</li>
<li>(400 V) 2.8 A / 134 W</li>
<li>(500 V) 2 A / 144 W</li>
<li>Rated Insulation Voltage (Ui):acc. to IEC 60947-4-1 and VDE 0110 (Gr. C) 690 V</li>
<li>Rated Impulse Withstand Voltage (Uimp):Auxiliary Circuit 6 kV</li>
<li>Maximum Mechanical Switching Frequency:3600 cycles per hour</li>
<li>Rated Control Circuit Voltage (Uc):50 Hz 220 ... 230 V</li>
<li>60 Hz 230 ... 240 V</li>
<li>Operate Time:Between Coil De-energization and NC Contact Closing 7 ... 14 ms</li>
<li>Between Coil De-energization and NO Contact Opening 4 ... 11 ms</li>
<li>Between Coil Energization and NC Contact Opening 6 ... 18 ms</li>
<li>Between Coil Energization and NO Contact Closing 8 ... 21 ms</li>
<li>Degree of Protection:acc. to IEC 60529, IEC 60947-1, EN 60529 Auxiliary Terminals IP20</li>
<li>acc. to IEC 60529, IEC 60947-1, EN 60529 Coil Terminals IP20</li>
<li>acc. to IEC 60529, IEC 60947-1, EN 60529 Main Terminals IP20</li>
<li>IP20</li>
<li>Terminal Type:Screw Terminals</li>
<li>Unit of Measurement : Pcs</li>
</ul>

abb ax40-30-10-80 contactor 3p 11kw 3no 1aux 50/60hz 230-240vac kontaktor contactors para kontraktor penyentuh penghubung 接触器

abb-ax40-30-10-80-contactor-3p-11kw-3no-1aux-50-60hz-230-240vac

Schneider Electric CONTACTOR 25A AC3 11KW 1NO 1NC 110VAC COIL

New TeSys D Green increase TeSys D range with a new electronic coil with up to 80% less consumption than TeSys D standard AC or DC coil

New and patented TeSys D with Everlink termination technology available on 40A to 65A contactors and overload relays

Eliminates the time-consuming process of selecting tested combinations through web sites and spreadsheets.

3-pole and 4-pole contactor versions available

All contactors include built-in auxiliary contacts

All screw connections have IP20 finger-safe terminals with both North American and International terminal markings

TeSys D contactors can be panel mounted with screws or DIN rail mounted

TeSys D Green contactor simplify your maintenance services with 90% less references needed.TeSys D Green contactor associated with TeSys LR9D electronic overload relay reduces heat generation and energy consumption up to 50%

High-fault short circuit current ratings provide the flexibility to select any component, as long as it meets or exceeds the desired SCCR

TeSys D contactors are available with AC or DC operating coils

A choice of wiring connections, including spring terminals, ring tongue terminals, slip-on terminals and screw clamps, provides flexibility in meeting specific, application requirements

Class 10 or Class 20 bimetallic overload relays are available up to 140 A

Available with or without single-phase sensitivity for phase unbalance and phase loss protection

New solid state overload relays are available for 90 to 150 A application

Auxiliary Contact 1 NO, 1 NC
Contact Configuration 3 NO
Contact Current Rating 25 A
Control Voltage 110 VAC
Depth 0.079" (2mm)
Dimensions 85 x 45 x 92 mm
Enclosure Type IP2x
Horsepower Rating 20 HP
Length 3.346" (85mm)
Maximum Operating Temperature  60 C
Minimum Operating Temperature  -5 C
Mounting Type DIN Rail Mounted ; Panel Mounted
Number of Poles 3 Pole
Power Rating 15 kW
Primary Type Contactor

Size : 85 H x 45 W x 92 Dia. mm
Standards : CSA C22.2 No. 14 ; EN 60947-4-1 ; EN 60947-5-1 ; IEC 60947-4-1 ; IEC 60947-5-1 ; UL 508
Temperature Operating Range: -5 to 60 C
Terminal Type : Box Clamp
UPC Code: 785901207139
Voltage Rating: 690 VAC, 300 VDC
Width : 1.772" 45mm

<h3 class="md-block-header-three">Schneider Electric CONTACTOR 25A AC3 11KW 1NO 1NC 110VAC COIL</h3><ul class="md-block-unordered-list-item"><li>New TeSys D Green increase TeSys D range with a new electronic coil with up to 80% less consumption than TeSys D standard AC or DC coil</li><li>New and patented TeSys D with Everlink termination technology available on 40A to 65A contactors and overload relays</li><li>Eliminates the time-consuming process of selecting tested combinations through web sites and spreadsheets.</li><li>Simple to select the right product</li><li>3-pole and 4-pole contactor versions available</li><li>All contactors include built-in auxiliary contacts</li><li>All screw connections have IP20 finger-safe terminals with both North American and International terminal markings</li><li>TeSys D contactors can be panel mounted with screws or DIN rail mounted</li><li>TeSys D Green contactor simplify your maintenance services with 90% less references needed.TeSys D Green contactor associated with TeSys LR9D electronic overload relay reduces heat generation and energy consumption up to 50%</li><li>High-fault short circuit current ratings provide the flexibility to select any component, as long as it meets or exceeds the desired SCCR</li><li>TeSys D contactors are available with AC or DC operating coils</li><li>A choice of wiring connections, including spring terminals, ring tongue terminals, slip-on terminals and screw clamps, provides flexibility in meeting specific, application requirements</li><li>Class 10 or Class 20 bimetallic overload relays are available up to 140 A</li><li>Available with or without single-phase sensitivity for phase unbalance and phase loss protection</li><li>New solid state overload relays are available for 90 to 150 A application</li></ul>Auxiliary Contact 1 NO, 1 NC Contact Configuration 3 NO Contact Current Rating 25 A Control Voltage 110 VAC Depth 0.079&quot; (2mm) Dimensions 85 x 45 x 92 mm Enclosure Type IP2x Horsepower Rating 20 HP Length 3.346&quot; (85mm) Maximum Operating Temperature 60 C Minimum Operating Temperature -5 C Mounting Type DIN Rail Mounted ; Panel Mounted Number of Poles 3 Pole Power Rating 15 kW Primary Type ContactorSize : 85 H x 45 W x 92 Dia. mm Standards : CSA C22.2 No. 14 ; EN 60947-4-1 ; EN 60947-5-1 ; IEC 60947-4-1 ; IEC 60947-5-1 ; UL 508 Temperature Operating Range: -5 to 60 C Terminal Type : Box Clamp UPC Code: 785901207139 Voltage Rating: 690 VAC, 300 VDC Width : 1.772&quot; 45mm

<h3>Schneider Electric CONTACTOR 25A AC3 11KW 1NO 1NC 110VAC COIL</h3>
<ul>
<li>New TeSys D Green increase TeSys D range with a new electronic coil with up to 80% less consumption than TeSys D standard AC or DC coil</li>
<li>New and patented TeSys D with Everlink termination technology available on 40A to 65A contactors and overload relays</li>
<li>Eliminates the time-consuming process of selecting tested combinations through web sites and spreadsheets.</li>
<li>Simple to select the right product</li>
<li>3-pole and 4-pole contactor versions available</li>
<li>All contactors include built-in auxiliary contacts</li>
<li>All screw connections have IP20 finger-safe terminals with both North American and International terminal markings</li>
<li>TeSys D contactors can be panel mounted with screws or DIN rail mounted</li>
<li>TeSys D Green contactor simplify your maintenance services with 90% less references needed.TeSys D Green contactor associated with TeSys LR9D electronic overload relay reduces heat generation and energy consumption up to 50%</li>
<li>High-fault short circuit current ratings provide the flexibility to select any component, as long as it meets or exceeds the desired SCCR</li>
<li>TeSys D contactors are available with AC or DC operating coils</li>
<li>A choice of wiring connections, including spring terminals, ring tongue terminals, slip-on terminals and screw clamps, provides flexibility in meeting specific, application requirements</li>
<li>Class 10 or Class 20 bimetallic overload relays are available up to 140 A</li>
<li>Available with or without single-phase sensitivity for phase unbalance and phase loss protection</li>
<li>New solid state overload relays are available for 90 to 150 A application</li>
</ul>
Auxiliary Contact 1 NO, 1 NC 
Contact Configuration 3 NO 
Contact Current Rating 25 A 
Control Voltage 110 VAC 
Depth 0.079" (2mm) 
Dimensions 85 x 45 x 92 mm 
Enclosure Type IP2x 
Horsepower Rating 20 HP 
Length 3.346" (85mm) 
Maximum Operating Temperature 60 C 
Minimum Operating Temperature -5 C 
Mounting Type DIN Rail Mounted ; Panel Mounted 
Number of Poles 3 Pole 
Power Rating 15 kW 
Primary Type Contactor
Size : 85 H x 45 W x 92 Dia. mm 
Standards : CSA C22.2 No. 14 ; EN 60947-4-1 ; EN 60947-5-1 ; IEC 60947-4-1 ; IEC 60947-5-1 ; UL 508 
Temperature Operating Range: -5 to 60 C 
Terminal Type : Box Clamp 
UPC Code: 785901207139 
Voltage Rating: 690 VAC, 300 VDC 
Width : 1.772" 45mm

Schneider Electric Contactor 25A AC3 11KW 110VAC Coil

schneider electric contactor 25a ac3 11kw 110vac coil kontaktor listrik contactors para kontraktor penyentuh elektrik gegelung penghubung electric/施耐德电气 接触器 线圈 施耐德电气

schneider-electric-contactor-25a-ac3-11kw-110vac-coil

Schneider Electric CA3KN31FD3 Control Relay 3NO + 1NC, 110 a F.l.c, 5 Ma Contact Rating, 0.003 Kw, 110 Vdc, Tesys

schneider electric ca3kn31fd3 control relay 3no 1nc, 110 f.l.c, 5ma contact rating, 0.003 kw, vdc, tesys relai kontrol peringkat kontak ma, 0,003 overload relays geganti kawalan penilaian sentuhan, electric/施耐德电气 控制继电器 1nc，110 f.l.c，5 触点额定值，0.003 kw，110 vdc，tesys 施耐德电气

schneider-electric-ca3kn31fd3-control-relay-3no-1nc-110-a-f-l-c-5-ma-contact-rating-0-003-kw-110-vdc-tesys

Abb NF22E-13 Relay Control 690V 2NO+2NC 6A 100-250V50/60HZ-DC

Catalog Description:NF22E-13 100-250V50/60HZ-DC Contactor Relay

Long Description:NF contactor relays are used for switching auxiliary and control circuits. NF contactor relays include an electronic coil interface accepting a wide control voltage Uc min. ... Uc max. Only four coils cover control voltages between 24...500 V 50/60 Hz or 20...500 V DC. NF contactor relays can manage large control voltage variations. One coil can be used for different control voltages used worldwide without any coil change. NF contactor relays have built-in surge protection and do not require additional surge suppressors. - Poles: 4-pole contactor relays (mechanically-linked auxiliary contacts compliant with Annex L of IEC 60947-5-1 and including the "Mechanically Linked" symbol on the contactor relay side) - Control Circuit: AC or DC operated - Accessories: a wide range of Accessories is available.

Standards:IEC/EN 60947-1, IEC/EN 60947-5-1, UL 508, CSA C22.2 No. 14-13

Conventional Free-air Thermal Current (Ith):acc. to IEC 60947-5-1, Θ = 40 °C 16 A

Rated Operational Current AC-15 (Ie):(500 V) 2 A

Rated Short-time Withstand Current Low Voltage (Icw):for 0.1 s 140 A

Maximum Electrical Switching Frequency:(AC-15) 1200 cycles per hour

Rated Insulation Voltage (Ui):acc. to IEC 60947-5-1 690 V

Rated Impulse Withstand Voltage (Uimp):6 kV

Maximum Mechanical Switching Frequency:6000 cycles per hour

Rated Control Circuit Voltage (Uc):50 Hz 100 ... 250 V

Operate Time:Between Coil De-energization and NC Contact Closing 13 ... 98 ms

Between Coil De-energization and NO Contact Opening 11 ... 95 ms

Between Coil Energization and NC Contact Opening 38 ... 90 ms

<h3 class="md-block-header-three">Abb NF22E-13 Relay Control 690V 2NO+2NC 6A 100-250V50/60HZ-DC</h3> <ul class="md-block-unordered-list-item"><li>Extended Product Type:NF22E-13</li><li>Product ID:1SBH137001R1322</li><li>EAN:3471523100138</li><li>Catalog Description:NF22E-13 100-250V50/60HZ-DC Contactor Relay</li><li>Long Description:NF contactor relays are used for switching auxiliary and control circuits. NF contactor relays include an electronic coil interface accepting a wide control voltage Uc min. ... Uc max. Only four coils cover control voltages between 24...500 V 50/60 Hz or 20...500 V DC. NF contactor relays can manage large control voltage variations. One coil can be used for different control voltages used worldwide without any coil change. NF contactor relays have built-in surge protection and do not require additional surge suppressors. - Poles: 4-pole contactor relays (mechanically-linked auxiliary contacts compliant with Annex L of IEC 60947-5-1 and including the &quot;Mechanically Linked&quot; symbol on the contactor relay side) - Control Circuit: AC or DC operated - Accessories: a wide range of Accessories is available.</li><li>Unit of Measurement : Pcs</li></ul>Technical<ul class="md-block-unordered-list-item"><li>Number of Auxiliary Contacts NO:2</li><li>Number of Auxiliary Contacts NC:2</li><li>Standards:IEC/EN 60947-1, IEC/EN 60947-5-1, UL 508, CSA C22.2 No. 14-13</li><li>Rated Operational Voltage:Auxiliary Circuit 690 V</li><li>Rated Frequency (f):Auxiliary Circuit 50 / 60 Hz</li><li>Control Circuit 50 / 60 Hz</li><li>Conventional Free-air Thermal Current (Ith):acc. to IEC 60947-5-1, Θ = 40 °C 16 A</li><li>Rated Operational Current AC-15 (Ie):(500 V) 2 A</li><li>(690 V) 2 A</li><li>(24 / 127 V) 6 A</li><li>(220 / 240 V) 4 A</li><li>(400 / 440 V) 3 A</li><li>Rated Short-time Withstand Current Low Voltage (Icw):for 0.1 s 140 A</li><li>for 1 s 100 A</li><li>Maximum Electrical Switching Frequency:(AC-15) 1200 cycles per hour</li><li>(DC-13) 900 cycles per hour</li><li>Rated Operational Current DC-13 (Ie):(24 V) 6 A / 144 W</li><li>(48 V) 2.8 A / 134 W</li><li>(72 V) 1 A / 72 W</li><li>(110 V) 0.55 A / 60 W</li><li>(125 V) 0.55 A / 69 W</li><li>(220 V) 0.27 A / 60 W</li><li>(250 V) 0.27 A / 68 W</li><li>(400 V) 0.15 A / 60 W</li><li>(500 V) 0.13 A / 65 W</li><li>(600 V) 0.1 A / 60 W</li><li>Rated Insulation Voltage (Ui):acc. to IEC 60947-5-1 690 V</li><li>acc. to UL/CSA 600 V</li><li>Rated Impulse Withstand Voltage (Uimp):6 kV</li><li>Maximum Mechanical Switching Frequency:6000 cycles per hour</li><li>Rated Control Circuit Voltage (Uc):50 Hz 100 ... 250 V</li><li>60 Hz 100 ... 250 V</li><li>DC Operation 100 ... 250 V</li><li>Operate Time:Between Coil De-energization and NC Contact Closing 13 ... 98 ms</li><li>Between Coil De-energization and NO Contact Opening 11 ... 95 ms</li><li>Between Coil Energization and NC Contact Opening 38 ... 90 ms</li><li>Between Coil Energization and NO Contact Closing 40 ... 95 ms</li><li>Mounting on DIN Rail:TH35-15 (35 x 15 mm Mounting Rail) acc. to IEC 60715</li><li>TH35-7.5 (35 x 7.5 mm Mounting Rail) acc. to IEC 60715</li><li>Mounting by Screws (not supplied):2 x M4 screws placed diagonally</li><li>Connecting Capacity Auxiliary Circuit:Flexible with Ferrule 1/2x 0.75 ... 2.5 mm²</li><li>Flexible with Insulated Ferrule 1x 0.75 ... 2.5 mm²</li><li>Flexible with Insulated Ferrule 2x 0.75 ... 1.5 mm²</li><li>Rigid Solid 1/2x 1 ... 2.5 mm²</li><li>Rigid Stranded 1/2x 1 ... 2.5 mm²</li><li>Connecting Capacity Control Circuit:Flexible with Ferrule 1/2x 0.75 ... 2.5 mm²</li><li>Flexible with Insulated Ferrule 1x 0.75 ... 2.5 mm²</li><li>Flexible with Insulated Ferrule 2x 0.75 ... 1.5 mm²</li><li>Rigid Solid 1/2x 1 ... 2.5 mm²</li><li>Rigid Stranded 1/2x 1 ... 2.5 mm²</li><li>Wire Stripping Length:Auxiliary Circuit 10 mm</li><li>Control Circuit 10 mm</li><li>Degree of Protection:acc. to IEC 60529, IEC 60947-1, EN 60529 Auxiliary Terminals IP20</li><li>acc. to IEC 60529, IEC 60947-1, EN 60529 Coil Terminals IP20</li><li>Terminal Type:Screw Terminals</li></ul>

<h3>Abb NF22E-13 Relay Control 690V 2NO+2NC 6A 100-250V50/60HZ-DC</h3>
&nbsp;&nbsp;
<ul>
<li>Extended Product Type:NF22E-13</li>
<li>Product ID:1SBH137001R1322</li>
<li>EAN:3471523100138</li>
<li>Catalog Description:NF22E-13 100-250V50/60HZ-DC Contactor Relay</li>
<li>Long Description:NF contactor relays are used for switching auxiliary and control circuits. NF contactor relays include an electronic coil interface accepting a wide control voltage Uc min. ... Uc max. Only four coils cover control voltages between 24...500 V 50/60 Hz or 20...500 V DC. NF contactor relays can manage large control voltage variations. One coil can be used for different control voltages used worldwide without any coil change. NF contactor relays have built-in surge protection and do not require additional surge suppressors. - Poles: 4-pole contactor relays (mechanically-linked auxiliary contacts compliant with Annex L of IEC 60947-5-1 and including the "Mechanically Linked" symbol on the contactor relay side) - Control Circuit: AC or DC operated - Accessories: a wide range of Accessories is available.</li>
<li>Unit of Measurement : Pcs</li>
</ul>
Technical
<ul>
<li>Number of Auxiliary Contacts NO:2</li>
<li>Number of Auxiliary Contacts NC:2</li>
<li>Standards:IEC/EN 60947-1, IEC/EN 60947-5-1, UL 508, CSA C22.2 No. 14-13</li>
<li>Rated Operational Voltage:Auxiliary Circuit 690 V</li>
<li>Rated Frequency (f):Auxiliary Circuit 50 / 60 Hz</li>
<li>Control Circuit 50 / 60 Hz</li>
<li>Conventional Free-air Thermal Current (Ith):acc. to IEC 60947-5-1, Θ = 40 °C 16 A</li>
<li>Rated Operational Current AC-15 (Ie):(500 V) 2 A</li>
<li>(690 V) 2 A</li>
<li>(24 / 127 V) 6 A</li>
<li>(220 / 240 V) 4 A</li>
<li>(400 / 440 V) 3 A</li>
<li>Rated Short-time Withstand Current Low Voltage (Icw):for 0.1 s 140 A</li>
<li>for 1 s 100 A</li>
<li>Maximum Electrical Switching Frequency:(AC-15) 1200 cycles per hour</li>
<li>(DC-13) 900 cycles per hour</li>
<li>Rated Operational Current DC-13 (Ie):(24 V) 6 A / 144 W</li>
<li>(48 V) 2.8 A / 134 W</li>
<li>(72 V) 1 A / 72 W</li>
<li>(110 V) 0.55 A / 60 W</li>
<li>(125 V) 0.55 A / 69 W</li>
<li>(220 V) 0.27 A / 60 W</li>
<li>(250 V) 0.27 A / 68 W</li>
<li>(400 V) 0.15 A / 60 W</li>
<li>(500 V) 0.13 A / 65 W</li>
<li>(600 V) 0.1 A / 60 W</li>
<li>Rated Insulation Voltage (Ui):acc. to IEC 60947-5-1 690 V</li>
<li>acc. to UL/CSA 600 V</li>
<li>Rated Impulse Withstand Voltage (Uimp):6 kV</li>
<li>Maximum Mechanical Switching Frequency:6000 cycles per hour</li>
<li>Rated Control Circuit Voltage (Uc):50 Hz 100 ... 250 V</li>
<li>60 Hz 100 ... 250 V</li>
<li>DC Operation 100 ... 250 V</li>
<li>Operate Time:Between Coil De-energization and NC Contact Closing 13 ... 98 ms</li>
<li>Between Coil De-energization and NO Contact Opening 11 ... 95 ms</li>
<li>Between Coil Energization and NC Contact Opening 38 ... 90 ms</li>
<li>Between Coil Energization and NO Contact Closing 40 ... 95 ms</li>
<li>Mounting on DIN Rail:TH35-15 (35 x 15 mm Mounting Rail) acc. to IEC 60715</li>
<li>TH35-7.5 (35 x 7.5 mm Mounting Rail) acc. to IEC 60715</li>
<li>Mounting by Screws (not supplied):2 x M4 screws placed diagonally</li>
<li>Connecting Capacity Auxiliary Circuit:Flexible with Ferrule 1/2x 0.75 ... 2.5 mm²</li>
<li>Flexible with Insulated Ferrule 1x 0.75 ... 2.5 mm²</li>
<li>Flexible with Insulated Ferrule 2x 0.75 ... 1.5 mm²</li>
<li>Rigid Solid 1/2x 1 ... 2.5 mm²</li>
<li>Rigid Stranded 1/2x 1 ... 2.5 mm²</li>
<li>Connecting Capacity Control Circuit:Flexible with Ferrule 1/2x 0.75 ... 2.5 mm²</li>
<li>Flexible with Insulated Ferrule 1x 0.75 ... 2.5 mm²</li>
<li>Flexible with Insulated Ferrule 2x 0.75 ... 1.5 mm²</li>
<li>Rigid Solid 1/2x 1 ... 2.5 mm²</li>
<li>Rigid Stranded 1/2x 1 ... 2.5 mm²</li>
<li>Wire Stripping Length:Auxiliary Circuit 10 mm</li>
<li>Control Circuit 10 mm</li>
<li>Degree of Protection:acc. to IEC 60529, IEC 60947-1, EN 60529 Auxiliary Terminals IP20</li>
<li>acc. to IEC 60529, IEC 60947-1, EN 60529 Coil Terminals IP20</li>
<li>Terminal Type:Screw Terminals</li>
</ul>