Iwata

RS Pro

Mechanical Parts

mechanical-parts

Ball Bearings

ball-bearings

O Ring

o-ring

Fasteners

fasteners

Shaft Brackets

shaft-brackets

Mechanical Power Transmissions

mechanical-power-transmissions

Taper Lock Bushes

taper-lock-bushes

Standard set collar attached with set screw

The inner ring of bearing can be held down by 30° chamfer

Hexagon Socket Head Set Screw (Hollow Tip Black Dyeing) - 2 Piece

<h3 class="md-block-header-three">Features:</h3><ul class="md-block-unordered-list-item"><li>Standard set collar attached with set screw</li><li>The inner ring of bearing can be held down by 30° chamfer</li><li>Can be used to fix sprockets and gears</li><li>Material is iron</li></ul><h3 class="md-block-header-three">Specification:</h3><ul class="md-block-unordered-list-item"><li>Brand: Iwata</li><li>Product Type: Basic Shaft Collar</li><li>Material: Iron S45C</li><li>Surface Treatment: Black Dyed</li><li>Inner Diameter (φB): 10 mm</li><li>Width (L): 8 mm</li><li>Outer Diameter (φD): 18 mm</li><li>Chamfer Diameter (φD1): 16 mm</li><li>Tightening Screw (M): M4x4</li></ul><h3 class="md-block-header-three">Accessories:</h3><ul class="md-block-unordered-list-item"><li>Hexagon Socket Head Set Screw (Hollow Tip Black Dyeing) - 2 Piece</li></ul>

<h3>Features:</h3>
<ul>
<li>Standard set collar attached with set screw</li>
<li>The inner ring of bearing can be held down by 30° chamfer</li>
<li>Can be used to fix sprockets and gears</li>
<li>Material is iron</li>
</ul>
<h3>Specification:</h3>
<ul>
<li>Brand: Iwata</li>
<li>Product Type: Basic Shaft Collar</li>
<li>Material: Iron S45C</li>
<li>Surface Treatment: Black Dyed</li>
<li>Inner Diameter (φB): 10 mm</li>
<li>Width (L): 8 mm</li>
<li>Outer Diameter (φD): 18 mm</li>
<li>Chamfer Diameter (φD1): 16 mm</li>
<li>Tightening Screw (M): M4x4</li>
</ul>
<h3>Accessories:</h3>
<ul>
<li>Hexagon Socket Head Set Screw (Hollow Tip Black Dyeing) - 2 Piece</li>
</ul>


IT Accessories

Hooks & Eyes

Machinery Accessories

Leland Tan

buyerIntroduction

Iwata Iron Black Dyeing Basic Shaft Collar 10mm X 8mm SC1008C

iwata iron black dyeing basic shaft collar 10mm x 8mm sc1008c besi pencelupan hitam dasar ball bearings bearing kerah bebola iwata/岩田 铁黑色染色基本轴环10mm 球轴承 岩田

iwata-iron-black-dyeing-basic-shaft-collar-10mm-x-8mm-sc1008c

Hex Socket Set Screws (Recessed SUSXM7) - 2 Piece

<h3 class="md-block-header-three">Features:</h3><ul class="md-block-unordered-list-item"><li>Standard set collar attached with set screw</li><li>The inner ring of bearing can be held down by 30° chamfer</li><li>Can be used to fix sprockets and gears</li><li>Material is resin POM</li></ul><h3 class="md-block-header-three">Specification:</h3><ul class="md-block-unordered-list-item"><li>Brand: Iwata</li><li>Product Type: Basic Shaft Collar</li><li>Material: Resin POM</li><li>Colour: White</li><li>Inner Diameter (φB): 10 mm</li><li>Width (L): 8 mm</li><li>Outer Diameter (φD): 20 mm</li><li>Tightening Screw (M): M4x4</li></ul><h3 class="md-block-header-three">Accessories:</h3><ul class="md-block-unordered-list-item"><li>Hex Socket Set Screws (Recessed SUSXM7) - 2 Piece</li></ul>

<h3>Features:</h3>
<ul>
<li>Standard set collar attached with set screw</li>
<li>The inner ring of bearing can be held down by 30° chamfer</li>
<li>Can be used to fix sprockets and gears</li>
<li>Material is resin POM</li>
</ul>
<h3>Specification:</h3>
<ul>
<li>Brand: Iwata</li>
<li>Product Type: Basic Shaft Collar</li>
<li>Material: Resin POM</li>
<li>Colour: White</li>
<li>Inner Diameter (φB): 10 mm</li>
<li>Width (L): 8 mm</li>
<li>Outer Diameter (φD): 20 mm</li>
<li>Tightening Screw (M): M4x4</li>
</ul>
<h3>Accessories:</h3>
<ul>
<li>Hex Socket Set Screws (Recessed SUSXM7) - 2 Piece</li>
</ul>


Iwata Resin Pom Basic Shaft Collar 10mm X 8mm SC1008X

iwata resin pom basic shaft collar 10mm x 8mm sc1008x kerah poros dasar ball bearings bearing bebola iwata/岩田 树脂pom基础轴环10mm 球轴承 岩田

iwata-resin-pom-basic-shaft-collar-10mm-x-8mm-sc1008x

Surface Treatment: Electroless Nickel Plating

<h3 class="md-block-header-three">Features:</h3><ul class="md-block-unordered-list-item"><li>Standard set collar attached with set screw</li><li>The inner ring of bearing can be held down by 30° chamfer</li><li>Can be used to fix sprockets and gears</li><li>Material is iron</li></ul><h3 class="md-block-header-three">Specification:</h3><ul class="md-block-unordered-list-item"><li>Brand: Iwata</li><li>Product Type: Basic Shaft Collar</li><li>Material: Iron S45C</li><li>Surface Treatment: Electroless Nickel Plating</li><li>Inner Diameter (φB): 10 mm</li><li>Width (L): 8 mm</li><li>Outer Diameter (φD): 18 mm</li><li>Chamfer Diameter (φD1): 16 mm</li><li>Tightening Screw (M): M4x4</li></ul><h3 class="md-block-header-three">Accessories:</h3><ul class="md-block-unordered-list-item"><li>Hex Socket Set Screws (Recessed SUSXM7) - 2 Piece</li></ul>

<h3>Features:</h3>
<ul>
<li>Standard set collar attached with set screw</li>
<li>The inner ring of bearing can be held down by 30° chamfer</li>
<li>Can be used to fix sprockets and gears</li>
<li>Material is iron</li>
</ul>
<h3>Specification:</h3>
<ul>
<li>Brand: Iwata</li>
<li>Product Type: Basic Shaft Collar</li>
<li>Material: Iron S45C</li>
<li>Surface Treatment: Electroless Nickel Plating</li>
<li>Inner Diameter (φB): 10 mm</li>
<li>Width (L): 8 mm</li>
<li>Outer Diameter (φD): 18 mm</li>
<li>Chamfer Diameter (φD1): 16 mm</li>
<li>Tightening Screw (M): M4x4</li>
</ul>
<h3>Accessories:</h3>
<ul>
<li>Hex Socket Set Screws (Recessed SUSXM7) - 2 Piece</li>
</ul>


Iwata Iron Electroless Nickel Plating Basic Shaft Collar 10mm X 8mm SC1008M

iwata iron electroless nickel plating basic shaft collar 10mm x 8mm sc1008m nikel ball bearings bearing bebola iwata/岩田 县铁化学镀镍基础轴环10mm 球轴承 岩田

iwata-iron-electroless-nickel-plating-basic-shaft-collar-10mm-x-8mm-sc1008m

<h3 class="md-block-header-three">Features:</h3><ul class="md-block-unordered-list-item"><li>Standard set collar attached with set screw</li><li>The inner ring of bearing can be held down by 30° chamfer</li><li>Can be used to fix sprockets and gears</li><li>Material is stainless steel</li></ul><h3 class="md-block-header-three">Specification:</h3><ul class="md-block-unordered-list-item"><li>Brand: Iwata</li><li>Product Type: Basic Shaft Collar</li><li>Material: Stainless Steel SUS304</li><li>Inner Diameter (φB): 10 mm</li><li>Width (L): 8 mm</li><li>Outer Diameter (φD): 18 mm</li><li>Chamfer Diameter (φD1): 16 mm</li><li>Tightening Screw (M): M4x4</li></ul><h3 class="md-block-header-three">Accessories:</h3><ul class="md-block-unordered-list-item"><li>Hex Socket Set Screws (Recessed SUSXM7) - 2 Piece</li></ul>

<h3>Features:</h3>
<ul>
<li>Standard set collar attached with set screw</li>
<li>The inner ring of bearing can be held down by 30° chamfer</li>
<li>Can be used to fix sprockets and gears</li>
<li>Material is stainless steel</li>
</ul>
<h3>Specification:</h3>
<ul>
<li>Brand: Iwata</li>
<li>Product Type: Basic Shaft Collar</li>
<li>Material: Stainless Steel SUS304</li>
<li>Inner Diameter (φB): 10 mm</li>
<li>Width (L): 8 mm</li>
<li>Outer Diameter (φD): 18 mm</li>
<li>Chamfer Diameter (φD1): 16 mm</li>
<li>Tightening Screw (M): M4x4</li>
</ul>
<h3>Accessories:</h3>
<ul>
<li>Hex Socket Set Screws (Recessed SUSXM7) - 2 Piece</li>
</ul>


Iwata Stainless Steel Basic Shaft Collar 10mm X 8mm SC1008S

iwata stainless steel basic shaft collar 10mm x 8mm sc1008s ball bearings bearing kerah bebola iwata/岩田 县不锈钢基础轴环10mm 球轴承 岩田

iwata-stainless-steel-basic-shaft-collar-10mm-x-8mm-sc1008s

RS Pro Datasheet

Siemens

STANLEY

DEUTSCH

Facom

RAPID

SCHNEIDER ELECTRIC

ECLIPSE TOOLS

Screw

Plugs & Connector 

Surface Mount Resistors

Bolts

Panel Mount Indicators 

Button Switch

Electrical Wire 

Junction & Enclosure Box

Aluminium Capacitors

RS Components ETH SG

Rs Pro 0184353 Taper Bush 1008, 14mm Shaft Diameter

rs pro 0184353 taper bush 1008, 14mm shaft diameter poros lock bushes belukar tirus aci 锥形衬套 1008，14mm 轴直径 rs专业版

rs-pro-0184353-taper-bush-1008-14mm-shaft-diameter

Rs Pro 0184369 Taper Bush 1008, 19mm Shaft Diameter

rs pro 0184369 taper bush 1008, 19mm shaft diameter poros lock bushes semak tirus aci 锥形衬套 1008，19mm 轴直径 rs专业版

rs-pro-0184369-taper-bush-1008-19mm-shaft-diameter

Rs Pro Taper Bush 1008, 25mm Shaft Diameter

rs pro taper bush 1008, 25mm shaft diameter poros lock bushes aci 锥形衬套 1008，25 毫米轴径 rs专业版

rs-pro-taper-bush-1008-25mm-shaft-diameter

Rs Pro 1465439 Taper Bush 1008, 16mm Shaft Diameter

rs pro 1465439 taper bush 1008, 16mm shaft diameter poros lock bushes belukar tirus aci 锥形衬套 1008，16mm 轴直径 rs专业版

rs-pro-1465439-taper-bush-1008-16mm-shaft-diameter

Rs Pro 0184347 Taper Bush 1008, 12mm Shaft Diameter

rs pro 0184347 taper bush 1008, 12mm shaft diameter poros lock bushes semak tirus aci 锥形衬套 1008，12mm 轴直径 rs专业版

rs-pro-0184347-taper-bush-1008-12mm-shaft-diameter

Rs Pro Taper Bush 1008, 20mm Shaft Diameter

rs pro taper bush 1008, 20mm shaft diameter poros lock bushes aci 锥形衬套 1008，20 毫米轴径 rs专业版

rs-pro-taper-bush-1008-20mm-shaft-diameter

Rs Pro 1465438 Taper Bush 1008, 10mm Shaft Diameter

rs pro 1465438 taper bush 1008, 10mm shaft diameter poros lock bushes belukar tirus aci 锥套 1008，轴直径 rs专业版

rs-pro-1465438-taper-bush-1008-10mm-shaft-diameter

For the-separate structures bracket mounting after assembly shaft, removable can inexpensively is lightweight compared with the cutting products for sheet metal products 

2 screw holes, it can be installed and our sensor bracket

Product Type: Shaft Bracket with 2 Threaded Holes

Hex Socket Head Cap Screw (SUSXM7) M4 x 15 - 2 Piece

<h3 class="md-block-header-three">Features:</h3><ul class="md-block-unordered-list-item"><li>For the-separate structures bracket mounting after assembly shaft, removable can inexpensively is lightweight compared with the cutting products for sheet metal products </li><li>2 screw holes, it can be installed and our sensor bracket</li><li>Material is stainless steel</li></ul><h3 class="md-block-header-three">Specification:</h3><ul class="md-block-unordered-list-item"><li>Brand: Iwata</li><li>Product Type: Shaft Bracket with 2 Threaded Holes</li><li>Material: Stainless Steel SUS304</li><li>Inner Diameter (ØB): 12 mm</li><li>Width (H): 14 mm</li><li>Outer Diameter (ØD): 41 mm</li><li>Y: 27.5 mm</li><li>X: 12.5 mm</li><li>Thickness (T): 2.5 mm</li><li>W: 0.5 mm</li><li>Weight: 56 g</li></ul><h3 class="md-block-header-three">Accessories:</h3><ul class="md-block-unordered-list-item"><li>Hex Socket Head Cap Screw (SUSXM7) M4 x 15 - 2 Piece</li></ul>

<h3>Features:</h3>
<ul>
<li>For the-separate structures bracket mounting after assembly shaft, removable can inexpensively is lightweight compared with the cutting products for sheet metal products&nbsp;</li>
<li>2 screw holes, it can be installed and our sensor bracket</li>
<li>Material is stainless steel</li>
</ul>
<h3>Specification:</h3>
<ul>
<li>Brand: Iwata</li>
<li>Product Type: Shaft Bracket with 2 Threaded Holes</li>
<li>Material: Stainless Steel SUS304</li>
<li>Inner Diameter (ØB): 12 mm</li>
<li>Width (H): 14 mm</li>
<li>Outer Diameter (ØD): 41 mm</li>
<li>Y: 27.5 mm</li>
<li>X: 12.5 mm</li>
<li>Thickness (T): 2.5 mm</li>
<li>W: 0.5 mm</li>
<li>Weight: 56 g</li>
</ul>
<h3>Accessories:</h3>
<ul>
<li>Hex Socket Head Cap Screw (SUSXM7) M4 x 15 - 2 Piece</li>
</ul>


Iwata Stainless Steel Shaft Bracket With 2 Threaded Holes for 12mm Round Shaft B12SN2

iwata stainless steel shaft bracket threaded holes 12mm round b12sn2 dengan lubang berulir untuk poros bulat brackets pendakap keluli tahan karat iwata/岩田 县不锈钢制轴支架，带有2个螺纹孔，用于12mm圆轴b12sn2 岩田

iwata-stainless-steel-shaft-bracket-with-2-threaded-holes-for-12mm-round-shaft-b12sn2

<h3 class="md-block-header-three">Features:</h3><ul class="md-block-unordered-list-item"><li>Standard set collar attached with set screw</li><li>The inner ring of bearing can be held down by 30° chamfer</li><li>Can be used to fix sprockets and gears</li><li>Material is stainless steel</li></ul><h3 class="md-block-header-three">Specification:</h3><ul class="md-block-unordered-list-item"><li>Brand: Iwata</li><li>Product Type: Basic Shaft Collar</li><li>Material: Stainless Steel SUS304</li><li>Inner Diameter (φB): 35 mm</li><li>Width (L): 15 mm</li><li>Outer Diameter (φD): 50 mm</li><li>Chamfer Diameter (φD1): 47 mm</li><li>Tightening Screw (M): M8x8</li></ul><h3 class="md-block-header-three">Accessories:</h3><ul class="md-block-unordered-list-item"><li>Hex Socket Set Screws (Recessed SUSXM7) - 2 Piece</li></ul>

<h3>Features:</h3>
<ul>
<li>Standard set collar attached with set screw</li>
<li>The inner ring of bearing can be held down by 30° chamfer</li>
<li>Can be used to fix sprockets and gears</li>
<li>Material is stainless steel</li>
</ul>
<h3>Specification:</h3>
<ul>
<li>Brand: Iwata</li>
<li>Product Type: Basic Shaft Collar</li>
<li>Material: Stainless Steel SUS304</li>
<li>Inner Diameter (φB): 35 mm</li>
<li>Width (L): 15 mm</li>
<li>Outer Diameter (φD): 50 mm</li>
<li>Chamfer Diameter (φD1): 47 mm</li>
<li>Tightening Screw (M): M8x8</li>
</ul>
<h3>Accessories:</h3>
<ul>
<li>Hex Socket Set Screws (Recessed SUSXM7) - 2 Piece</li>
</ul>


Iwata Stainless Steel Basic Shaft Collar 35mm X 15mm SC3515S

iwata stainless steel basic shaft collar 35mm x 15mm sc3515s ball bearings bearing kerah bebola iwata/岩田 县不锈钢基础轴环35mm 球轴承 岩田

iwata-stainless-steel-basic-shaft-collar-35mm-x-15mm-sc3515s

Nitrile is often referred to Buna (Buna-N) and NBR.

Nitrile elastomer being affordable is a common material widely used in the industry where sealing take place using O-Ring. It is popular in the industry due to it ability to withstand a wide range of temperature ranging from (-30`C to 100`C). 

It has excellent resistance to petroleum application, it is rated good in the Gas impermeability. In addition Nitrile material are one of the best in its compression and abrasion resistance. The only down side of Nitrile have a poor ozone and weather resistance and only moderate resistance to high temperature.

However Nitrile are not a restricting factors in many applications.

Overview on Application Rating for Material Nitrile (NBR) 

Other than the size and material type, there is one final option that you need to take in consideration. And that is the Durometer. Durometer are being classify as an industry standard to measure the elastomer hardness. Durometer is measured and listed in accordance with Shore A scale. Typical standard hardness for the elastomer are 70 shore, 75 shore and 90 shore to choose from depending on the material that you are using. The higher the value of the shore indicates that the material you are using is harder.Durometer is also generally stated and accepted with a “+/- 5” tolerance.

O-Rings and rubber seals are generally used for:

· Applications that require resistance to OIL

· Applications that are required to work in low temperatures (-0°C)

· High performance Fuel systems that requires strictly no leakage

O-rings need to be installed properly for a perfect fit and sealing. It is important that you install the O-ring in a prescribed manner to ensure your application continues to function properly. You will also ensure you increase the life of the application.

The process of installing an O-ring into a male gland is an intricate affair that should be carefully undertaken. Glide it along the shaft so as it reaches the gland. At that point, it should easily snap into place. Simple as it might sound, a number of steps will ensure that the O-ring doesn’t get damaged.

If you want to install an O-ring correctly and within a short time, here are steps to follow:

· Covering and lubricating the threading of the shaft

The threading of the shaft has the potential of tearing the rubber seal. Cover the threads using a masking tape and then lubricate them to allow for easy passage of the O-ring. The aim is to have the O-ring slide through without getting torn.

That’s a tip that will save you the stress of a torn O-ring. In fact, running the O-ring over jagged or sharp objects could get it torn. You may not be able to notice some of these tears. That’s why you should ensure you prevent them from occurring in the first place.

You will have to stretch the O-ring over the shaft. Ensure you do it evenly. Pulling from one side is a no-no. If anything, you should stretch the O-ring as little as possible. You will not just get a tighter grip but added security too.

Instead of rolling the O-ring down the shaft, slide it. If you spiral wind or roll an O-ring, it cannot be properly installed. It will also not function optimally and can even end up being damaged. If you have a lubricant, apply it on the O-ring and you will keep it rolling.

Place the female component in a manner that allows its radius to go around the corner. This should be done when you are finalizing the installation process. Ensure the lead of this component is inside the chamfer. This is how you will be able to guarantee the safety of the O-ring.

For O-rings to perform optimally, they have to be properly installed. It doesn’t just provide secure sealing but also increases the service life of the component together with the application. Don’t compromise on this process.

<p class="md-block-unstyled">ORING JIS B2401 G340 </p><p class="md-block-unstyled">ID 339.30 x CS 5.70</p><p class="md-block-unstyled">Material : Nitrile (NBR) 70 Shore</p><p class="md-block-unstyled">   </p><p class="md-block-unstyled">Nitrile is often referred to Buna (Buna-N) and NBR.</p><p class="md-block-unstyled">Nitrile elastomer being affordable is a common material widely used in the industry where sealing take place using O-Ring. It is popular in the industry due to it ability to withstand a wide range of temperature ranging from (-30&#x60;C to 100&#x60;C). </p><p class="md-block-unstyled">It has excellent resistance to petroleum application, it is rated good in the Gas impermeability. In addition Nitrile material are one of the best in its compression and abrasion resistance. The only down side of Nitrile have a poor ozone and weather resistance and only moderate resistance to high temperature.</p><p class="md-block-unstyled">However Nitrile are not a restricting factors in many applications.</p><p class="md-block-unstyled"><strong class="md-inline-bold"><u class="md-inline-underline">Temperature Range</u></strong></p><p class="md-block-unstyled">Low : -22&#x60;F / -30&#x60;C High: 212&#x60;F / 100&#x60;C</p><p class="md-block-unstyled"><strong class="md-inline-bold"><u class="md-inline-underline">Overview on Application Rating for Material Nitrile (NBR) </u></strong></p><p class="md-block-unstyled">Properties ( Rating )</p><p class="md-block-unstyled">Oils &amp; Grease - Good</p><p class="md-block-unstyled">Tear Strength - Good</p><p class="md-block-unstyled">Fuel Resistance - Poor</p><p class="md-block-unstyled">Gas impermeability - Good</p><p class="md-block-unstyled">Compression - Excellent</p><p class="md-block-unstyled">Abrasion Resistance - Good </p><p class="md-block-unstyled">Other than the size and material type, there is one final option that you need to take in consideration. And that is the Durometer. Durometer are being classify as an industry standard to measure the elastomer hardness. Durometer is measured and listed in accordance with Shore A scale. Typical standard hardness for the elastomer are 70 shore, 75 shore and 90 shore to choose from depending on the material that you are using. The higher the value of the shore indicates that the material you are using is harder.Durometer is also generally stated and accepted with a “+/- 5” tolerance.</p><p class="md-block-unstyled"><strong class="md-inline-bold"><u class="md-inline-underline">Primary Usage</u></strong></p><p class="md-block-unstyled">O-Rings and rubber seals are generally used for:</p><p class="md-block-unstyled">· Applications that require resistance to OIL</p><p class="md-block-unstyled">· Applications that are required to work in low temperatures (-0°C)</p><p class="md-block-unstyled">· High performance Fuel systems that requires strictly no leakage</p><ul class="md-block-unordered-list-item"><li>Aircrafts</li><li>Marine Ships</li><li>F1 Cars</li></ul><p class="md-block-unstyled">· General Industrial Use </p><p class="md-block-unstyled"><strong class="md-inline-bold"><u class="md-inline-underline">Tips for installation of an O-ring</u></strong></p><p class="md-block-unstyled">O-rings need to be installed properly for a perfect fit and sealing. It is important that you install the O-ring in a prescribed manner to ensure your application continues to function properly. You will also ensure you increase the life of the application.</p><p class="md-block-unstyled"><strong class="md-inline-bold"><u class="md-inline-underline">So how do you install an O-ring?</u></strong></p><p class="md-block-unstyled">The process of installing an O-ring into a male gland is an intricate affair that should be carefully undertaken. Glide it along the shaft so as it reaches the gland. At that point, it should easily snap into place. Simple as it might sound, a number of steps will ensure that the O-ring doesn’t get damaged.</p><p class="md-block-unstyled">If you want to install an O-ring correctly and within a short time, here are steps to follow:</p><p class="md-block-unstyled">· Covering and lubricating the threading of the shaft</p><p class="md-block-unstyled">The threading of the shaft has the potential of tearing the rubber seal. Cover the threads using a masking tape and then lubricate them to allow for easy passage of the O-ring. The aim is to have the O-ring slide through without getting torn.</p><p class="md-block-unstyled">· Don’t force it over sharp corners</p><p class="md-block-unstyled">That’s a tip that will save you the stress of a torn O-ring. In fact, running the O-ring over jagged or sharp objects could get it torn. You may not be able to notice some of these tears. That’s why you should ensure you prevent them from occurring in the first place.</p><p class="md-block-unstyled">· Even stretching</p><p class="md-block-unstyled">You will have to stretch the O-ring over the shaft. Ensure you do it evenly. Pulling from one side is a no-no. If anything, you should stretch the O-ring as little as possible. You will not just get a tighter grip but added security too.</p><p class="md-block-unstyled">· Don’t roll it down the shaft</p><p class="md-block-unstyled">Instead of rolling the O-ring down the shaft, slide it. If you spiral wind or roll an O-ring, it cannot be properly installed. It will also not function optimally and can even end up being damaged. If you have a lubricant, apply it on the O-ring and you will keep it rolling.</p><p class="md-block-unstyled">· Finishing it off</p><p class="md-block-unstyled">Place the female component in a manner that allows its radius to go around the corner. This should be done when you are finalizing the installation process. Ensure the lead of this component is inside the chamfer. This is how you will be able to guarantee the safety of the O-ring.</p><p class="md-block-unstyled"><em class="md-inline-italic">For O-rings to perform optimally, they have to be properly installed. It doesn’t just provide secure sealing but also increases the service life of the component together with the application. Don’t compromise on this process.</em></p><p class="md-block-unstyled"><strong class="md-inline-bold"><u class="md-inline-underline">Installation Guide</u></strong></p><figure class="md-block-image"><img src="https://storage.googleapis.com/eezee-product-images/DadZLbACRoFjzoZ0xJJwX1.png" alt="" /><figcaption className="md-block-image-caption"></figcaption></figure>

<p>ORING JIS B2401 G340&nbsp;</p>
<p>ID 339.30 x CS 5.70</p>
<p>Material : Nitrile (NBR) 70 Shore</p>
<p>&nbsp;&nbsp;&nbsp;</p>
<p>Nitrile is often referred to Buna (Buna-N) and NBR.</p>
<p>Nitrile elastomer being affordable is a common material widely used in the industry where sealing take place using O-Ring. It is popular in the industry due to it ability to withstand a wide range of temperature ranging from (-30`C to 100`C).&nbsp;</p>
<p>It has excellent resistance to petroleum application, it is rated good in the Gas impermeability. In addition Nitrile material are one of the best in its compression and abrasion resistance. The only down side of Nitrile have a poor ozone and weather resistance and only moderate resistance to high temperature.</p>
<p>However Nitrile are not a restricting factors in many applications.</p>
<p><strong><ins>Temperature Range</ins></strong></p>
<p>Low : -22`F / -30`C High: 212`F / 100`C</p>
<p><strong><ins>Overview on Application Rating for Material Nitrile (NBR) </ins></strong></p>
<p>Properties ( Rating )</p>
<p>Oils &amp; Grease - Good</p>
<p>Tear Strength - Good</p>
<p>Fuel Resistance - Poor</p>
<p>Gas impermeability - Good</p>
<p>Compression - Excellent</p>
<p>Abrasion Resistance - Good&nbsp;</p>
<p>Other than the size and material type, there is one final option that you need to take in consideration. And that is the Durometer. Durometer are being classify as an industry standard to measure the elastomer hardness. Durometer is measured and listed in accordance with Shore A scale. Typical standard hardness for the elastomer are 70 shore, 75 shore and 90 shore to choose from depending on the material that you are using. The higher the value of the shore indicates that the material you are using is harder.Durometer is also generally stated and accepted with a “+/- 5” tolerance.</p>
<p><strong><ins>Primary Usage</ins></strong></p>
<p>O-Rings and rubber seals are generally used for:</p>
<p>· Applications that require resistance to OIL</p>
<p>· Applications that are required to work in low temperatures (-0°C)</p>
<p>· High performance Fuel systems that requires strictly no leakage</p>
<ul>
<li>Aircrafts</li>
<li>Marine Ships</li>
<li>F1 Cars</li>
</ul>
<p>· General Industrial Use&nbsp;</p>
<p><strong><ins>Tips for installation of an O-ring</ins></strong></p>
<p>O-rings need to be installed properly for a perfect fit and sealing. It is important that you install the O-ring in a prescribed manner to ensure your application continues to function properly. You will also ensure you increase the life of the application.</p>
<p><strong><ins>So how do you install an O-ring?</ins></strong></p>
<p>The process of installing an O-ring into a male gland is an intricate affair that should be carefully undertaken. Glide it along the shaft so as it reaches the gland. At that point, it should easily snap into place. Simple as it might sound, a number of steps will ensure that the O-ring doesn’t get damaged.</p>
<p>If you want to install an O-ring correctly and within a short time, here are steps to follow:</p>
<p>· Covering and lubricating the threading of the shaft</p>
<p>The threading of the shaft has the potential of tearing the rubber seal. Cover the threads using a masking tape and then lubricate them to allow for easy passage of the O-ring. The aim is to have the O-ring slide through without getting torn.</p>
<p>· Don’t force it over sharp corners</p>
<p>That’s a tip that will save you the stress of a torn O-ring. In fact, running the O-ring over jagged or sharp objects could get it torn. You may not be able to notice some of these tears. That’s why you should ensure you prevent them from occurring in the first place.</p>
<p>· Even stretching</p>
<p>You will have to stretch the O-ring over the shaft. Ensure you do it evenly. Pulling from one side is a no-no. If anything, you should stretch the O-ring as little as possible. You will not just get a tighter grip but added security too.</p>
<p>· Don’t roll it down the shaft</p>
<p>Instead of rolling the O-ring down the shaft, slide it. If you spiral wind or roll an O-ring, it cannot be properly installed. It will also not function optimally and can even end up being damaged. If you have a lubricant, apply it on the O-ring and you will keep it rolling.</p>
<p>· Finishing it off</p>
<p>Place the female component in a manner that allows its radius to go around the corner. This should be done when you are finalizing the installation process. Ensure the lead of this component is inside the chamfer. This is how you will be able to guarantee the safety of the O-ring.</p>
<p><em>For O-rings to perform optimally, they have to be properly installed. It doesn’t just provide secure sealing but also increases the service life of the component together with the application. Don’t compromise on this process.</em></p>
<p><strong><ins>Installation Guide</ins></strong></p>

        <div class="img-ctnr">
          <amp-img  
            on="tap:5ijfe"
            tabindex="0"
            role="button"
            class="contain"
            layout="fill"
            src="https://storage.googleapis.com/eezee-product-images/DadZLbACRoFjzoZ0xJJwX1.png"
          ></amp-img>
        </div>
    
        <amp-image-lightbox 
          id="5ijfe" 
          layout="nodisplay"></amp-image-lightbox>

        
