SCHNEIDER ELECTRIC

Electricals

electricals

Monitoring Relays

monitoring-relays

Overload Relays

overload-relays

RS Pro

Screw

O Ring

Surface Mount Resistors

Circular Connectors

Contactors

Bolts

Panel Mount Indicators 

Junction & Enclosure Box

Electrical Wire 

Button Switch

RS Components ETH SG

buyerIntroduction

Schneider Electric CA2KN40M7 CA2KN Control Relay 4NO, 10 a F.l.c, 10 a Contact Rating, 4.5 Va, 220 → 230 Vac, Tesys

schneider electric ca2kn40m7 ca2kn control relay 4no, 10 f.l.c, contact rating, 4.5 va, 220 230 vac, tesys relai kontrol peringkat kontak, 4,5 overload relays geganti kawalan penarafan sentuhan, electric/施耐德电气 控制继电器 4no，10 f.l.c，10 触点额定值，4.5 va，220 vac，tesys 施耐德电气

schneider-electric-ca2kn40m7-ca2kn-control-relay-4no-10-a-f-l-c-10-a-contact-rating-4-5-va-220-230-vac-tesys

Schneider Electric 56273 Residual Current Protection Relay, Vigipact RH99P, 30mA-30A, 220/240VAC 50/60Hz, Front Panel Mounting

 VigiPacT RH99P is a front panel mounting residual current protection relay. It protects against people direct or indirect contact, property fire hazards and motors. It measures the earth leakage current in an electrical installation via its associated toroid. It trips the associated circuit breaker when the set residual operation current is overrun. The operational supply voltage is 220/240VAC 50/60Hz. It is a type A earth-leakage protection class. The current sensitivity is selectable with 9 thresholds from 30 mA to 30 A. The time delay is selectable with 9 settings from instantaneous to 4.5s. It requires a local manual reset after a fault clearance. The monitored distribution system voltage is up to 1000 VAC 50/60/400 Hz. It is installed on a front panel switchboard and the protection degree is IP40. It must be associated with a compatible Schneider Electric type A toroid or rectangular sensor. 

Product or component type: Residual current protection relay

Residual earth-leakage sensitivity adjustment type: Adjustable (9 settings)

Adjustable (9 settings) 0…4.5 s for 0.03…30 A

VigiPacT TOA earth leakage current sensor

[Ithe] conventional enclosed thermal current: 8 A

[Us] rated supply voltage: 220...240 V AC 50/60 Hz (55...110%)

[Uimp] rated impulse withstand voltage: 8 kV

Type of measurement: Earth fault current internal measurement, range: 80...100%

Tamperproof of settings: Protected by sealable cover

Auxiliary power supply: terminal block cable(s) 0.2…2.5 mm² flexible AWG 24...AWG 12

Fault: terminal block cable(s) 0.2…2.5 mm² flexible AWG 24...AWG 12

Relay test and fault reset: terminal block cable(s) 0.2…2.5 mm² flexible AWG 24...AWG 12

Sensor: terminal block cable(s) 0.2…2.5 mm² flexible AWG 24...AWG 12

Voltage presence: terminal block cable(s) 0.2…2.5 mm² flexible AWG 24...AWG 12

IP40 on front face: conforming to EN/IEC 60529

IP30 on side parts: conforming to EN/IEC 60529

IP20 on connection terminals: conforming to EN/IEC 60529

IK degree of protection: IK07 conforming to EN 50102

Fire resistance conforming to IEC 60695-2-1

IK protection 2 joules: IK07 conforming to EN 50102

Electrical shock protection class: Class II

Conducted and radiated emissions: Class B, conforming to CISPR 11

Conducted radio-frequency immunity test: Level 3, conforming to IEC 61000-4-6

Electrostatic discharge immunity test: Level 4, conforming to IEC 61000-4-2

High-energy conducted susceptibility: Level 4, conforming to IEC 61000-4-5

Low-energy conducted susceptibility: Level 4, conforming to IEC 61000-4-4

Radiated susceptibility: Level 3, conforming to IEC 61000-4-3

Pollution degree: 3 conforming to IEC 60664-1

Ambient air temperature for operation: -35…70°C

Ambient air temperature for storage: -55…85°C

<h3 class="md-block-header-three">Schneider Electric 56273 Residual Current Protection Relay, Vigipact RH99P, 30mA-30A, 220/240VAC 50/60Hz, Front Panel Mounting</h3> VigiPacT RH99P is a front panel mounting residual current protection relay. It protects against people direct or indirect contact, property fire hazards and motors. It measures the earth leakage current in an electrical installation via its associated toroid. It trips the associated circuit breaker when the set residual operation current is overrun. The operational supply voltage is 220/240VAC 50/60Hz. It is a type A earth-leakage protection class. The current sensitivity is selectable with 9 thresholds from 30 mA to 30 A. The time delay is selectable with 9 settings from instantaneous to 4.5s. It requires a local manual reset after a fault clearance. The monitored distribution system voltage is up to 1000 VAC 50/60/400 Hz. It is installed on a front panel switchboard and the protection degree is IP40. It must be associated with a compatible Schneider Electric type A toroid or rectangular sensor. Main <ul class="md-block-unordered-list-item"><li>Range: VigiPacT</li><li>Device short name: RH99P</li><li>Product or component type: Residual current protection relay</li><li>Relay application: Protection relay</li><li>Mounting support: Front panel</li><li>Earth-leakage protection class: Type A</li><li>Type of setting: Selector</li><li>Residual earth-leakage sensitivity adjustment type: Adjustable (9 settings)</li><li>Earth-leakage sensitivity: 0.03…30 A</li><li>Earth-leakage time delay:</li><ul class="md-block-unordered-list-item"><li>Instantaneous for 0.03 A</li><li>Adjustable (9 settings) 0…4.5 s for 0.03…30 A</li></ul><li>Current sensors compatibility:</li><ul class="md-block-unordered-list-item"><li>VigiPacT TOA earth leakage current sensor</li><li>VigiPacT A earth leakage current sensor</li><li>VigiPacT L earth leakage current sensor</li></ul><li>[Ithe] conventional enclosed thermal current: 8 A</li><li>Minimum load: 10 mA at 12 V</li><li>[Us] rated supply voltage: 220...240 V AC 50/60 Hz (55...110%)</li><li>Power consumption in VA: 4 VA</li><li>Monitored distribution system:</li><ul class="md-block-unordered-list-item"><li>1000 V - AC at 50/60 Hz (maximum)</li><li>1000 V - AC at 400 Hz (maximum)</li></ul><li>Earthing system: IT, TT, TN-S</li><li>[Uimp] rated impulse withstand voltage: 8 kV</li><li>Reset: Manual reset</li></ul> Complementary <ul class="md-block-unordered-list-item"><li>Test function:</li><ul class="md-block-unordered-list-item"><li>Local</li><li>Remote test</li></ul><li>Monitoring:</li><ul class="md-block-unordered-list-item"><li>Electronics (continuous)</li><li>Power supply (continuous)</li><li>Relay/sensor link (continuous)</li></ul><li>Type of measurement: Earth fault current internal measurement, range: 80...100%</li><li>Tamperproof of settings: Protected by sealable cover</li><li>Connections - terminals:</li><ul class="md-block-unordered-list-item"><li>Auxiliary power supply: terminal block cable(s) 0.2…2.5 mm² flexible AWG 24...AWG 12</li><li>Fault: terminal block cable(s) 0.2…2.5 mm² flexible AWG 24...AWG 12</li><li>Relay test and fault reset: terminal block cable(s) 0.2…2.5 mm² flexible AWG 24...AWG 12</li><li>Sensor: terminal block cable(s) 0.2…2.5 mm² flexible AWG 24...AWG 12</li><li>Voltage presence: terminal block cable(s) 0.2…2.5 mm² flexible AWG 24...AWG 12</li></ul><li>Wire stripping length:</li><ul class="md-block-unordered-list-item"><li>Auxiliary power supply: 7 mm</li><li>Fault: 7 mm</li><li>Relay test and fault reset: 7 mm</li><li>Sensor: 7 mm</li><li>Voltage presence: 7 mm</li></ul><li>Tightening torque:</li><ul class="md-block-unordered-list-item"><li>Auxiliary power supply: 0.6 N.m</li><li>Fault: 0.6 N.m</li><li>Relay test and fault reset: 0.6 N.m</li><li>Sensor: 0.6 N.m</li><li>Voltage presence: 0.6 N.m</li></ul><li>Standards:</li><ul class="md-block-unordered-list-item"><li>EN/IEC 60947-2 Annex M</li><li>EN/IEC 60755</li><li>UL 1053</li><li>CAN/CSA C22.2 No. 144</li></ul><li>Width: 72 mm</li><li>Height: 72 mm</li><li>Depth: 78 mm</li><li>Cut-out dimensions: 68 x 68 mm</li><li>Net weight: 0.3 kg</li><li>IP degree of protection:</li><ul class="md-block-unordered-list-item"><li>IP40 on front face: conforming to EN/IEC 60529</li><li>IP30 on side parts: conforming to EN/IEC 60529</li><li>IP20 on connection terminals: conforming to EN/IEC 60529</li></ul><li>IK degree of protection: IK07 conforming to EN 50102</li><li>Mechanical robustness:</li><ul class="md-block-unordered-list-item"><li>Fire resistance conforming to IEC 60695-2-1</li><li>IK protection 2 joules: IK07 conforming to EN 50102</li><li>Vibrations 13.2...100 Hz: 0.7 g</li><li>Vibrations 2...13.2 Hz: +/- 1 mm</li></ul></ul> Environment <ul class="md-block-unordered-list-item"><li>Overvoltage category: IV</li><li>Electrical shock protection class: Class II</li><li>Electromagnetic compatibility:</li><ul class="md-block-unordered-list-item"><li>Conducted and radiated emissions: Class B, conforming to CISPR 11</li><li>Conducted radio-frequency immunity test: Level 3, conforming to IEC 61000-4-6</li><li>Electrostatic discharge immunity test: Level 4, conforming to IEC 61000-4-2</li><li>High-energy conducted susceptibility: Level 4, conforming to IEC 61000-4-5</li><li>Low-energy conducted susceptibility: Level 4, conforming to IEC 61000-4-4</li><li>Radiated susceptibility: Level 3, conforming to IEC 61000-4-3</li></ul><li>Relative humidity: 95% at 55°C</li><li>Pollution degree: 3 conforming to IEC 60664-1</li><li>Ambient air temperature for operation: -35…70°C</li><li>Ambient air temperature for storage: -55…85°C</li></ul>

<h3>Schneider Electric 56273 Residual Current Protection Relay, Vigipact RH99P, 30mA-30A, 220/240VAC 50/60Hz, Front Panel Mounting</h3>
&nbsp;VigiPacT RH99P is a front panel mounting residual current protection relay. It protects against people direct or indirect contact, property fire hazards and motors. It measures the earth leakage current in an electrical installation via its associated toroid. It trips the associated circuit breaker when the set residual operation current is overrun. The operational supply voltage is 220/240VAC 50/60Hz. It is a type A earth-leakage protection class. The current sensitivity is selectable with 9 thresholds from 30 mA to 30 A. The time delay is selectable with 9 settings from instantaneous to 4.5s. It requires a local manual reset after a fault clearance. The monitored distribution system voltage is up to 1000 VAC 50/60/400 Hz. It is installed on a front panel switchboard and the protection degree is IP40. It must be associated with a compatible Schneider Electric type A toroid or rectangular sensor.&nbsp;
&nbsp;Main 
<ul>
<li>Range: VigiPacT</li>
<li>Device short name: RH99P</li>
<li>Product or component type: Residual current protection relay</li>
<li>Relay application: Protection relay</li>
<li>Mounting support: Front panel</li>
<li>Earth-leakage protection class: Type A</li>
<li>Type of setting: Selector</li>
<li>Residual earth-leakage sensitivity adjustment type: Adjustable (9 settings)</li>
<li>Earth-leakage sensitivity: 0.03…30 A</li>
<li>Earth-leakage time delay:</li>
<ul>
<li>Instantaneous for 0.03 A</li>
<li>Adjustable (9 settings) 0…4.5 s for 0.03…30 A</li>
</ul>
<li>Current sensors compatibility:</li>
<ul>
<li>VigiPacT TOA earth leakage current sensor</li>
<li>VigiPacT A earth leakage current sensor</li>
<li>VigiPacT L earth leakage current sensor</li>
</ul>
<li>[Ithe] conventional enclosed thermal current: 8 A</li>
<li>Minimum load: 10 mA at 12 V</li>
<li>[Us] rated supply voltage: 220...240 V AC 50/60 Hz (55...110%)</li>
<li>Power consumption in VA: 4 VA</li>
<li>Monitored distribution system:</li>
<ul>
<li>1000 V - AC at 50/60 Hz (maximum)</li>
<li>1000 V - AC at 400 Hz (maximum)</li>
</ul>
<li>Earthing system: IT, TT, TN-S</li>
<li>[Uimp] rated impulse withstand voltage: 8 kV</li>
<li>Reset: Manual reset</li>
</ul>
 Complementary &nbsp;
<ul>
<li>Test function:</li>
<ul>
<li>Local</li>
<li>Remote test</li>
</ul>
<li>Monitoring:</li>
<ul>
<li>Electronics (continuous)</li>
<li>Power supply (continuous)</li>
<li>Relay/sensor link (continuous)</li>
</ul>
<li>Type of measurement: Earth fault current internal measurement, range: 80...100%</li>
<li>Tamperproof of settings: Protected by sealable cover</li>
<li>Connections - terminals:</li>
<ul>
<li>Auxiliary power supply: terminal block cable(s) 0.2…2.5 mm² flexible AWG 24...AWG 12</li>
<li>Fault: terminal block cable(s) 0.2…2.5 mm² flexible AWG 24...AWG 12</li>
<li>Relay test and fault reset: terminal block cable(s) 0.2…2.5 mm² flexible AWG 24...AWG 12</li>
<li>Sensor: terminal block cable(s) 0.2…2.5 mm² flexible AWG 24...AWG 12</li>
<li>Voltage presence: terminal block cable(s) 0.2…2.5 mm² flexible AWG 24...AWG 12</li>
</ul>
<li>Wire stripping length:</li>
<ul>
<li>Auxiliary power supply: 7 mm</li>
<li>Fault: 7 mm</li>
<li>Relay test and fault reset: 7 mm</li>
<li>Sensor: 7 mm</li>
<li>Voltage presence: 7 mm</li>
</ul>
<li>Tightening torque:</li>
<ul>
<li>Auxiliary power supply: 0.6 N.m</li>
<li>Fault: 0.6 N.m</li>
<li>Relay test and fault reset: 0.6 N.m</li>
<li>Sensor: 0.6 N.m</li>
<li>Voltage presence: 0.6 N.m</li>
</ul>
<li>Standards:</li>
<ul>
<li>EN/IEC 60947-2 Annex M</li>
<li>EN/IEC 60755</li>
<li>UL 1053</li>
<li>CAN/CSA C22.2 No. 144</li>
</ul>
<li>Width: 72 mm</li>
<li>Height: 72 mm</li>
<li>Depth: 78 mm</li>
<li>Cut-out dimensions: 68 x 68 mm</li>
<li>Net weight: 0.3 kg</li>
<li>IP degree of protection:</li>
<ul>
<li>IP40 on front face: conforming to EN/IEC 60529</li>
<li>IP30 on side parts: conforming to EN/IEC 60529</li>
<li>IP20 on connection terminals: conforming to EN/IEC 60529</li>
</ul>
<li>IK degree of protection: IK07 conforming to EN 50102</li>
<li>Mechanical robustness:</li>
<ul>
<li>Fire resistance conforming to IEC 60695-2-1</li>
<li>IK protection 2 joules: IK07 conforming to EN 50102</li>
<li>Vibrations 13.2...100 Hz: 0.7 g</li>
<li>Vibrations 2...13.2 Hz: +/- 1 mm</li>
</ul>
</ul>
 Environment &nbsp;
<ul>
<li>Overvoltage category: IV</li>
<li>Electrical shock protection class: Class II</li>
<li>Electromagnetic compatibility:</li>
<ul>
<li>Conducted and radiated emissions: Class B, conforming to CISPR 11</li>
<li>Conducted radio-frequency immunity test: Level 3, conforming to IEC 61000-4-6</li>
<li>Electrostatic discharge immunity test: Level 4, conforming to IEC 61000-4-2</li>
<li>High-energy conducted susceptibility: Level 4, conforming to IEC 61000-4-5</li>
<li>Low-energy conducted susceptibility: Level 4, conforming to IEC 61000-4-4</li>
<li>Radiated susceptibility: Level 3, conforming to IEC 61000-4-3</li>
</ul>
<li>Relative humidity: 95% at 55°C</li>
<li>Pollution degree: 3 conforming to IEC 60664-1</li>
<li>Ambient air temperature for operation: -35…70°C</li>
<li>Ambient air temperature for storage: -55…85°C</li>
</ul>

Product Datasheet

Instruction sheet

Catalogue

Environmental disclosure

APC by Schneider Electric

CLIPSAL

Square D

Telemecanique

Pilot Lights

Light Switches

Miniature Circuit Breakers - MCBs

Uninterruptible Power Supply 

Molded Case Circuit Breakers - MCCBs

EasyPact Circuit Breakers 

Standby battery 

Schneider

schneider electric 56273 residual current protection relay, vigipact rh99p, 30ma-30a, 220/240vac 50/60hz, front panel mounting relai perlindungan arus residu, pemasangan depan monitoring relays pemantauan relay baki, geganti electric/施耐德电气 剩余电流保护继电器，vigipact rh99p，30ma-30a，220/240vac 50/60hz，前面板安装 监控继电器 施耐德电气

schneider-electric-56273-residual-current-protection-relay-vigipact-rh99p-30ma-30a-220-240vac-50-60hz-front-panel-mounting

Schneider Electric 56163 Residual Current Protection Relay, Vigipact RH21M, 30mA or 300mA, 220/240VAC 50/60Hz, Din Rail Mounting

 VigiPacT RH21M is a DIN rail mounting residual current protection relay. It protects against people direct or indirect contact, property fire hazards and motors. It measures the earth leakage current in an electrical installation via its associated toroid. It trips the associated circuit breaker when the set residual operation current is overrun. The operational supply voltage is 220/240VAC 50/60Hz. The current sensitivity is selectable with 2 thresholds 30 mA and 300 mA. The time delay is instantaneous 0.06s. It requires a local manual reset after a fault clearance. The monitored distribution system voltage is up to 1000 VAC 50/60/400 Hz. It is installed on a DIN-rail inside a switchboard and the protection degree is IP40. It must be associated with a compatible Schneider Electric type A toroid or rectangular sensor.  

Residual earth-leakage sensitivity adjustment type: Adjustable (2 settings)

 Auxiliary power supply: terminal block cable(s) 0.2…2.5 mm² flexible AWG 24...AWG 12

Auxiliary power supply: terminal block cable(s) 0.2…2.5 mm² rigid AWG 24...AWG 12

Auxiliary power supply: terminal block cable(s) 0.25…2.5 mm² flexible AWG 24...AWG 12

Fault: screw terminal cable(s) 0.2…2.5 mm² flexible AWG 24...AWG 12

Fault: screw terminal cable(s) 0.2…4 mm² rigid AWG 24...AWG 12

Fault: screw terminal cable(s) 0.25…2.5 mm² flexible AWG 24...AWG 12

Relay test and fault reset: screw terminal cable(s) 0.14…1 mm² flexible AWG 26...AWG 16

Relay test and fault reset: screw terminal cable(s) 0.14…1.5 mm² rigid AWG 26...AWG 16

Relay test and fault reset: screw terminal cable(s) 0.25…0.5 mm² flexible AWG 26...AWG 16

Sensor: screw terminal cable(s) 0.14…1 mm² flexible AWG 26...AWG 16

Sensor: screw terminal cable(s) 0.14…1.5 mm² rigid AWG 26...AWG 16

Sensor: screw terminal cable(s) 0.25…0.5 mm² flexible AWG 26...AWG 16

Voltage presence: screw terminal cable(s) 0.2…2.5 mm² flexible AWG 24...AWG 12

Voltage presence: screw terminal cable(s) 0.2…4 mm² rigid AWG 24...AWG 12

Voltage presence: screw terminal cable(s) 0.25…2.5 mm² flexible AWG 24...AWG 12 

Auxiliary power supply: 7 mm for top connection

Relay test and fault reset: 5 mm for bottom connection

Voltage presence: 8 mm for bottom connection

Relay test and fault reset: 0.25 N.m bottom

Fire resistance: conforming to IEC 60695-2-1

Conducted and radiated emissions: B, conforming to CISPR 11

Conducted radio-frequency immunity test: 3, conforming to IEC 61000-4-6

Electrostatic discharge immunity test: 4, conforming to IEC 61000-4-2

High-energy conducted susceptibility: 4, conforming to IEC 61000-4-5

Low-energy conducted susceptibility: 4, conforming to IEC 61000-4-4

Radiated susceptibility: 3, conforming to IEC 61000-4-3

<h3 class="md-block-header-three">Schneider Electric 56163 Residual Current Protection Relay, Vigipact RH21M, 30mA or 300mA, 220/240VAC 50/60Hz, Din Rail Mounting</h3> VigiPacT RH21M is a DIN rail mounting residual current protection relay. It protects against people direct or indirect contact, property fire hazards and motors. It measures the earth leakage current in an electrical installation via its associated toroid. It trips the associated circuit breaker when the set residual operation current is overrun. The operational supply voltage is 220/240VAC 50/60Hz. The current sensitivity is selectable with 2 thresholds 30 mA and 300 mA. The time delay is instantaneous 0.06s. It requires a local manual reset after a fault clearance. The monitored distribution system voltage is up to 1000 VAC 50/60/400 Hz. It is installed on a DIN-rail inside a switchboard and the protection degree is IP40. It must be associated with a compatible Schneider Electric type A toroid or rectangular sensor. Main <ul class="md-block-unordered-list-item"><li>Range: VigiPacT</li><li>Device short name: RH21M</li><li>Product or component type: Residual current protection relay</li><li>Relay application: Protection relay</li><li>Mounting support: DIN rail</li><li>Earth-leakage protection class: Type A</li><li>Type of setting: Selector</li><li>Residual earth-leakage sensitivity adjustment type: Adjustable (2 settings)</li><li>Earth-leakage sensitivity:</li><ul class="md-block-unordered-list-item"><li>0.03 A</li><li>0.3 A </li></ul><li>Earth-leakage time delay:</li><ul class="md-block-unordered-list-item"><li>Instantaneous for 0.03 A</li><li>Instantaneous for 0.3 A</li><li>Fixed 0.06 s for 0.3 A</li></ul><li>Current sensors compatibility:</li><ul class="md-block-unordered-list-item"><li>VigiPacT TOA earth leakage current sensor</li><li>VigiPacT A earth leakage current sensor</li><li>VigiPacT L earth leakage current sensor</li></ul><li>[Ithe] conventional enclosed thermal current: 8 A</li><li>Minimum load: 10 mA at 12 V</li><li>[Us] rated supply voltage: 220...240 V AC 50/60 Hz (55...110%)</li><li>Power consumption in VA: 4 VA</li><li>Monitored distribution system:</li><ul class="md-block-unordered-list-item"><li>1000 V - AC at 50/60 Hz (maximum)</li><li>1000 V - AC at 400 Hz (maximum)</li></ul><li>Earthing system: IT, TT, TN-S</li><li>[Uimp] rated impulse withstand voltage: 8 kV</li><li>Reset: Manual reset</li></ul> Complementary <ul class="md-block-unordered-list-item"><li>Test function:</li><ul class="md-block-unordered-list-item"><li>Local</li><li>Remote test</li><li>Monitoring</li><li>Electronics (continuous)</li><li>Power supply (continuous)</li><li>Relay/sensor link (continuous)</li></ul><li>Type of measurement: Earth fault current internal measurement, range: 80...100%</li><li>Tamperproof of settings: Protected by sealable cover</li><li>Connections - terminals:</li><ul class="md-block-unordered-list-item"><li> Auxiliary power supply: terminal block cable(s) 0.2…2.5 mm² flexible AWG 24...AWG 12</li><li>Auxiliary power supply: terminal block cable(s) 0.2…2.5 mm² rigid AWG 24...AWG 12</li><li>Auxiliary power supply: terminal block cable(s) 0.25…2.5 mm² flexible AWG 24...AWG 12</li><li>Fault: screw terminal cable(s) 0.2…2.5 mm² flexible AWG 24...AWG 12</li><li>Fault: screw terminal cable(s) 0.2…4 mm² rigid AWG 24...AWG 12</li><li>Fault: screw terminal cable(s) 0.25…2.5 mm² flexible AWG 24...AWG 12</li><li>Relay test and fault reset: screw terminal cable(s) 0.14…1 mm² flexible AWG 26...AWG 16</li><li>Relay test and fault reset: screw terminal cable(s) 0.14…1.5 mm² rigid AWG 26...AWG 16</li><li>Relay test and fault reset: screw terminal cable(s) 0.25…0.5 mm² flexible AWG 26...AWG 16</li><li>Sensor: screw terminal cable(s) 0.14…1 mm² flexible AWG 26...AWG 16</li><li>Sensor: screw terminal cable(s) 0.14…1.5 mm² rigid AWG 26...AWG 16</li><li>Sensor: screw terminal cable(s) 0.25…0.5 mm² flexible AWG 26...AWG 16</li><li>Voltage presence: screw terminal cable(s) 0.2…2.5 mm² flexible AWG 24...AWG 12</li><li>Voltage presence: screw terminal cable(s) 0.2…4 mm² rigid AWG 24...AWG 12</li><li>Voltage presence: screw terminal cable(s) 0.25…2.5 mm² flexible AWG 24...AWG 12 </li></ul><li>Wire stripping length:</li><ul class="md-block-unordered-list-item"><li>Auxiliary power supply: 7 mm for top connection</li><li>Fault: 8 mm for bottom connection</li><li>Relay test and fault reset: 5 mm for bottom connection</li><li>Sensor: 5 mm for top connection</li><li>Voltage presence: 8 mm for bottom connection</li></ul><li>Tightening torque:</li><ul class="md-block-unordered-list-item"><li>Auxiliary power supply: 0.6 N.m top</li><li>Fault: 0.6 N.m bottom</li><li>Relay test and fault reset: 0.25 N.m bottom</li><li>Sensor: 0.25 N.m top</li><li>Voltage presence: 0.6 N.m bottom</li></ul><li>9 mm pitches: 6</li><li>Standards:</li><ul class="md-block-unordered-list-item"><li>EN/IEC 60947-2 Annex M</li><li>EN/IEC 60755</li><li>UL 1053</li><li>CAN/CSA C22.2 No. 144</li></ul><li>Width: 54 mm</li><li>Height: 81 mm</li><li>Depth: 74 mm</li><li>Net weight: 0.3 kg</li><li>IP degree of protection:</li><ul class="md-block-unordered-list-item"><li>IP40 on front face: conforming to EN/IEC 60529</li><li>IP30 on side parts: conforming to EN/IEC 60529</li><li>IP20 on connection terminals: conforming to EN/IEC 60529</li></ul><li>IK degree of protection: IK07 conforming to EN 50102</li><li>Mechanical robustness:</li><ul class="md-block-unordered-list-item"><li>Fire resistance: conforming to IEC 60695-2-1</li><li>IK protection 2 joules: IK07 conforming to EN 50102</li><li>Vibrations: 13.2...100 Hz: 0.7 g</li><li>Vibrations 2...13.2 Hz: +/- 1 mm</li></ul></ul> Environment <ul class="md-block-unordered-list-item"><li>Overvoltage category: IV</li><li>Electrical shock protection class: Class II</li><li>Electromagnetic compatibility:</li><ul class="md-block-unordered-list-item"><li>Conducted and radiated emissions: B, conforming to CISPR 11</li><li>Conducted radio-frequency immunity test: 3, conforming to IEC 61000-4-6</li><li>Electrostatic discharge immunity test: 4, conforming to IEC 61000-4-2</li><li>High-energy conducted susceptibility: 4, conforming to IEC 61000-4-5</li><li>Low-energy conducted susceptibility: 4, conforming to IEC 61000-4-4</li><li>Radiated susceptibility: 3, conforming to IEC 61000-4-3</li></ul><li>Relative humidity: 95% at 55°C</li><li>Pollution degree: 3 conforming to IEC 60664-1</li><li>Ambient air temperature:</li><ul class="md-block-unordered-list-item"><li>For operation: -35…70 °C</li><li>For storage: -55…85 °C</li></ul></ul>

<h3>Schneider Electric 56163 Residual Current Protection Relay, Vigipact RH21M, 30mA or 300mA, 220/240VAC 50/60Hz, Din Rail Mounting</h3>
&nbsp;VigiPacT RH21M is a DIN rail mounting residual current protection relay. It protects against people direct or indirect contact, property fire hazards and motors. It measures the earth leakage current in an electrical installation via its associated toroid. It trips the associated circuit breaker when the set residual operation current is overrun. The operational supply voltage is 220/240VAC 50/60Hz. The current sensitivity is selectable with 2 thresholds 30 mA and 300 mA. The time delay is instantaneous 0.06s. It requires a local manual reset after a fault clearance. The monitored distribution system voltage is up to 1000 VAC 50/60/400 Hz. It is installed on a DIN-rail inside a switchboard and the protection degree is IP40. It must be associated with a compatible Schneider Electric type A toroid or rectangular sensor.&nbsp;&nbsp;
&nbsp;Main 
<ul>
<li>Range: VigiPacT</li>
<li>Device short name: RH21M</li>
<li>Product or component type: Residual current protection relay</li>
<li>Relay application: Protection relay</li>
<li>Mounting support: DIN rail</li>
<li>Earth-leakage protection class: Type A</li>
<li>Type of setting: Selector</li>
<li>Residual earth-leakage sensitivity adjustment type: Adjustable (2 settings)</li>
<li>Earth-leakage sensitivity:</li>
<ul>
<li>0.03 A</li>
<li>0.3 A&nbsp;</li>
</ul>
<li>Earth-leakage time delay:</li>
<ul>
<li>Instantaneous for 0.03 A</li>
<li>Instantaneous for 0.3 A</li>
<li>Fixed 0.06 s for 0.3 A</li>
</ul>
<li>Current sensors compatibility:</li>
<ul>
<li>VigiPacT TOA earth leakage current sensor</li>
<li>VigiPacT A earth leakage current sensor</li>
<li>VigiPacT L earth leakage current sensor</li>
</ul>
<li>[Ithe] conventional enclosed thermal current: 8 A</li>
<li>Minimum load: 10 mA at 12 V</li>
<li>[Us] rated supply voltage: 220...240 V AC 50/60 Hz (55...110%)</li>
<li>Power consumption in VA: 4 VA</li>
<li>Monitored distribution system:</li>
<ul>
<li>1000 V - AC at 50/60 Hz (maximum)</li>
<li>1000 V - AC at 400 Hz (maximum)</li>
</ul>
<li>Earthing system: IT, TT, TN-S</li>
<li>[Uimp] rated impulse withstand voltage: 8 kV</li>
<li>Reset: Manual reset</li>
</ul>
&nbsp;Complementary &nbsp;
<ul>
<li>Test function:</li>
<ul>
<li>Local</li>
<li>Remote test</li>
<li>Monitoring</li>
<li>Electronics (continuous)</li>
<li>Power supply (continuous)</li>
<li>Relay/sensor link (continuous)</li>
</ul>
<li>Type of measurement: Earth fault current internal measurement, range: 80...100%</li>
<li>Tamperproof of settings: Protected by sealable cover</li>
<li>Connections - terminals:</li>
<ul>
<li>&nbsp;Auxiliary power supply: terminal block cable(s) 0.2…2.5 mm² flexible AWG 24...AWG 12</li>
<li>Auxiliary power supply: terminal block cable(s) 0.2…2.5 mm² rigid AWG 24...AWG 12</li>
<li>Auxiliary power supply: terminal block cable(s) 0.25…2.5 mm² flexible AWG 24...AWG 12</li>
<li>Fault: screw terminal cable(s) 0.2…2.5 mm² flexible AWG 24...AWG 12</li>
<li>Fault: screw terminal cable(s) 0.2…4 mm² rigid AWG 24...AWG 12</li>
<li>Fault: screw terminal cable(s) 0.25…2.5 mm² flexible AWG 24...AWG 12</li>
<li>Relay test and fault reset: screw terminal cable(s) 0.14…1 mm² flexible AWG 26...AWG 16</li>
<li>Relay test and fault reset: screw terminal cable(s) 0.14…1.5 mm² rigid AWG 26...AWG 16</li>
<li>Relay test and fault reset: screw terminal cable(s) 0.25…0.5 mm² flexible AWG 26...AWG 16</li>
<li>Sensor: screw terminal cable(s) 0.14…1 mm² flexible AWG 26...AWG 16</li>
<li>Sensor: screw terminal cable(s) 0.14…1.5 mm² rigid AWG 26...AWG 16</li>
<li>Sensor: screw terminal cable(s) 0.25…0.5 mm² flexible AWG 26...AWG 16</li>
<li>Voltage presence: screw terminal cable(s) 0.2…2.5 mm² flexible AWG 24...AWG 12</li>
<li>Voltage presence: screw terminal cable(s) 0.2…4 mm² rigid AWG 24...AWG 12</li>
<li>Voltage presence: screw terminal cable(s) 0.25…2.5 mm² flexible AWG 24...AWG 12&nbsp;</li>
</ul>
<li>Wire stripping length:</li>
<ul>
<li>Auxiliary power supply: 7 mm for top connection</li>
<li>Fault: 8 mm for bottom connection</li>
<li>Relay test and fault reset: 5 mm for bottom connection</li>
<li>Sensor: 5 mm for top connection</li>
<li>Voltage presence: 8 mm for bottom connection</li>
</ul>
<li>Tightening torque:</li>
<ul>
<li>Auxiliary power supply: 0.6 N.m top</li>
<li>Fault: 0.6 N.m bottom</li>
<li>Relay test and fault reset: 0.25 N.m bottom</li>
<li>Sensor: 0.25 N.m top</li>
<li>Voltage presence: 0.6 N.m bottom</li>
</ul>
<li>9 mm pitches: 6</li>
<li>Standards:</li>
<ul>
<li>EN/IEC 60947-2 Annex M</li>
<li>EN/IEC 60755</li>
<li>UL 1053</li>
<li>CAN/CSA C22.2 No. 144</li>
</ul>
<li>Width: 54 mm</li>
<li>Height: 81 mm</li>
<li>Depth: 74 mm</li>
<li>Net weight: 0.3 kg</li>
<li>IP degree of protection:</li>
<ul>
<li>IP40 on front face: conforming to EN/IEC 60529</li>
<li>IP30 on side parts: conforming to EN/IEC 60529</li>
<li>IP20 on connection terminals: conforming to EN/IEC 60529</li>
</ul>
<li>IK degree of protection: IK07 conforming to EN 50102</li>
<li>Mechanical robustness:</li>
<ul>
<li>Fire resistance: conforming to IEC 60695-2-1</li>
<li>IK protection 2 joules: IK07 conforming to EN 50102</li>
<li>Vibrations: 13.2...100 Hz: 0.7 g</li>
<li>Vibrations 2...13.2 Hz: +/- 1 mm</li>
</ul>
</ul>
&nbsp;&nbsp;Environment&nbsp;&nbsp;
<ul>
<li>Overvoltage category: IV</li>
<li>Electrical shock protection class: Class II</li>
<li>Electromagnetic compatibility:</li>
<ul>
<li>Conducted and radiated emissions: B, conforming to CISPR 11</li>
<li>Conducted radio-frequency immunity test: 3, conforming to IEC 61000-4-6</li>
<li>Electrostatic discharge immunity test: 4, conforming to IEC 61000-4-2</li>
<li>High-energy conducted susceptibility: 4, conforming to IEC 61000-4-5</li>
<li>Low-energy conducted susceptibility: 4, conforming to IEC 61000-4-4</li>
<li>Radiated susceptibility: 3, conforming to IEC 61000-4-3</li>
</ul>
<li>Relative humidity: 95% at 55°C</li>
<li>Pollution degree: 3 conforming to IEC 60664-1</li>
<li>Ambient air temperature:</li>
<ul>
<li>For operation: -35…70 °C</li>
<li>For storage: -55…85 °C</li>
</ul>
</ul>

schneider electric 56163 residual current protection relay, vigipact rh21m, 30ma 300ma, 220/240vac 50/60hz, din rail mounting relai perlindungan arus residu, atau pemasangan rel monitoring relays pemantauan relay baki, geganti electric/施耐德电气 剩余电流保护继电器，vigipact rh21m，30ma 300ma，220/240vac 50/60hz，din 导轨安装 监控继电器 施耐德电气

schneider-electric-56163-residual-current-protection-relay-vigipact-rh21m-30ma-or-300ma-220-240vac-50-60hz-din-rail-mounting

Schneider Electric 56174 Residual Current Protection Relay, Vigipact RH99M, 30mA-30A, 380/415VAC 50/60Hz, Din Rail Mounting

 VigiPacT RH99M is a DIN rail mounting residual current protection relay. It protects against people direct or indirect contact, property fire hazards and motors. It measures the earth leakage current in an electrical installation via its associated toroid. It trips the associated circuit breaker when the set residual operation current is overrun. The operational supply voltage is 380/415VAC 50/60Hz. The current sensitivity is selectable with 9 thresholds from 30 mA to 30 A. The time delay is selectable with 9 settings from instantaneous to 4.5s. It requires a local manual reset after a fault clearance. The monitored distribution system voltage is up to 1000 VAC 50/60/400 Hz. It is installed on a DIN-rail inside a switchboard and the protection degree is IP40. It must be associated with a compatible Schneider Electric type A toroid or rectangular sensor. 

[Us] rated supply voltage: 380...415 V AC 50/60 Hz (55...110%)

Auxiliary power supply: screw terminal cable(s) 0.2…2.5 mm² flexible AWG 24...AWG 12

<h3 class="md-block-header-three">Schneider Electric 56174 Residual Current Protection Relay, Vigipact RH99M, 30mA-30A, 380/415VAC 50/60Hz, Din Rail Mounting</h3> VigiPacT RH99M is a DIN rail mounting residual current protection relay. It protects against people direct or indirect contact, property fire hazards and motors. It measures the earth leakage current in an electrical installation via its associated toroid. It trips the associated circuit breaker when the set residual operation current is overrun. The operational supply voltage is 380/415VAC 50/60Hz. The current sensitivity is selectable with 9 thresholds from 30 mA to 30 A. The time delay is selectable with 9 settings from instantaneous to 4.5s. It requires a local manual reset after a fault clearance. The monitored distribution system voltage is up to 1000 VAC 50/60/400 Hz. It is installed on a DIN-rail inside a switchboard and the protection degree is IP40. It must be associated with a compatible Schneider Electric type A toroid or rectangular sensor. Main <ul class="md-block-unordered-list-item"><li>Range: VigiPacT</li><li>Device short name: RH99M</li><li>Product or component type: Residual current protection relay</li><li>Relay application: Protection relay</li><li>Mounting support: DIN rail</li><li>Earth-leakage protection class: Type A</li><li>Type of setting: Selector</li><li>Residual earth-leakage sensitivity adjustment type: Adjustable (9 settings)</li><li>Earth-leakage sensitivity: 0.03…30 A</li><li>Earth-leakage time delay:</li><ul class="md-block-unordered-list-item"><li>Instantaneous for 0.03 A</li><li>Adjustable (9 settings) 0…4.5 s for 0.03…30 A</li></ul><li>Current sensors compatibility:</li><ul class="md-block-unordered-list-item"><li>VigiPacT TOA earth leakage current sensor</li><li>VigiPacT A earth leakage current sensor</li><li>VigiPacT L earth leakage current sensor</li></ul><li>[Ithe] conventional enclosed thermal current: 8 A</li><li>Minimum load: 10 mA at 12 V</li><li>[Us] rated supply voltage: 380...415 V AC 50/60 Hz (55...110%)</li><li>Power consumption in VA: 4 VA</li><li>Monitored distribution system:</li><ul class="md-block-unordered-list-item"><li>1000 V - AC at 50/60 Hz (maximum)</li><li>1000 V - AC at 400 Hz (maximum)</li></ul><li>Earthing system: TT, IT, TN-S</li><li>[Uimp] rated impulse withstand voltage: 8 kV</li><li>Reset: Manual reset</li></ul> Complementary <ul class="md-block-unordered-list-item"><li>Test function:</li><ul class="md-block-unordered-list-item"><li>Local</li><li>Remote test</li></ul><li>Monitoring:</li><ul class="md-block-unordered-list-item"><li>Electronics (continuous)</li><li>Power supply (continuous)</li><li>Relay/sensor link (continuous)</li></ul><li>Type of measurement: Earth fault current internal measurement, range: 80...100%</li><li>Tamperproof of settings: Protected by sealable cover</li><li>Connections - terminals:</li><ul class="md-block-unordered-list-item"><li>Auxiliary power supply: screw terminal cable(s) 0.2…2.5 mm² flexible AWG 24...AWG 12</li><li>Fault: screw terminal cable(s) 0.2…2.5 mm² flexible AWG 24...AWG 12</li><li>Relay test and fault reset: screw terminal cable(s) 0.14…1 mm² flexible AWG 26...AWG 16</li><li>Sensor: screw terminal cable(s) 0.14…1 mm² flexible AWG 26...AWG 16</li><li>Voltage presence: screw terminal cable(s) 0.2…2.5 mm² flexible AWG 24...AWG 12</li></ul><li>Wire stripping length:</li><ul class="md-block-unordered-list-item"><li>Auxiliary power supply: 7 mm for top connection</li><li>Fault: 8 mm for bottom connection</li><li>Relay test and fault reset: 5 mm for bottom connection</li><li>Sensor: 5 mm for top connection</li><li>Voltage presence: 8 mm for bottom connection</li></ul><li>Tightening torque:</li><ul class="md-block-unordered-list-item"><li>Auxiliary power supply: 0.6 N.m top</li><li>Fault: 0.6 N.m bottom</li><li>Relay test and fault reset: 0.25 N.m bottom</li><li>Sensor: 0.25 N.m top</li><li>Voltage presence: 0.6 N.m bottom</li></ul><li>9 mm pitches: 6</li><li>Standards:</li><ul class="md-block-unordered-list-item"><li>EN/IEC 60947-2 Annex M</li><li>EN/IEC 60755</li><li>UL 1053</li><li>CAN/CSA C22.2 No. 144</li></ul><li>Width: 54 mm</li><li>Height: 81 mm</li><li>Depth: 74 mm</li><li>Net weight: 0.3 kg</li><li>IP degree of protection:</li><ul class="md-block-unordered-list-item"><li>IP40 on front face: conforming to EN/IEC 60529</li><li>IP30 on side parts: conforming to EN/IEC 60529</li><li>IP20 on connection terminals: conforming to EN/IEC 60529</li></ul><li>IK degree of protection: IK07 conforming to EN 50102</li><li>Mechanical robustness:</li><ul class="md-block-unordered-list-item"><li>Fire resistance conforming to IEC 60695-2-1</li><li>IK protection 2 joules: IK07 conforming to EN 50102</li><li>Vibrations 13.2...100 Hz: 0.7 g</li><li>Vibrations 2...13.2 Hz: +/- 1 mm</li></ul></ul> Environment <ul class="md-block-unordered-list-item"><li>Overvoltage category: IV</li><li>Electrical shock protection class: Class II</li><li>Electromagnetic compatibility:</li><ul class="md-block-unordered-list-item"><li>Conducted and radiated emissions: Class B, conforming to CISPR 11</li><li>Conducted radio-frequency immunity test: Level 3, conforming to IEC 61000-4-6</li><li>Electrostatic discharge immunity test: Level 4, conforming to IEC 61000-4-2</li><li>High-energy conducted susceptibility: Level 4, conforming to IEC 61000-4-5</li><li>Low-energy conducted susceptibility: Level 4, conforming to IEC 61000-4-4</li><li>Radiated susceptibility: Level 3, conforming to IEC 61000-4-3</li></ul><li>Relative humidity: 95% at 55°C</li><li>Pollution degree: 3 conforming to IEC 60664-1</li><li>Ambient air temperature for operation: -35…70°C</li><li>Ambient air temperature for storage: -55…85°C</li></ul>

<h3>Schneider Electric 56174 Residual Current Protection Relay, Vigipact RH99M, 30mA-30A, 380/415VAC 50/60Hz, Din Rail Mounting</h3>
&nbsp;VigiPacT RH99M is a DIN rail mounting residual current protection relay. It protects against people direct or indirect contact, property fire hazards and motors. It measures the earth leakage current in an electrical installation via its associated toroid. It trips the associated circuit breaker when the set residual operation current is overrun. The operational supply voltage is 380/415VAC 50/60Hz. The current sensitivity is selectable with 9 thresholds from 30 mA to 30 A. The time delay is selectable with 9 settings from instantaneous to 4.5s. It requires a local manual reset after a fault clearance. The monitored distribution system voltage is up to 1000 VAC 50/60/400 Hz. It is installed on a DIN-rail inside a switchboard and the protection degree is IP40. It must be associated with a compatible Schneider Electric type A toroid or rectangular sensor.&nbsp;
 Main &nbsp;
<ul>
<li>Range: VigiPacT</li>
<li>Device short name: RH99M</li>
<li>Product or component type: Residual current protection relay</li>
<li>Relay application: Protection relay</li>
<li>Mounting support: DIN rail</li>
<li>Earth-leakage protection class: Type A</li>
<li>Type of setting: Selector</li>
<li>Residual earth-leakage sensitivity adjustment type: Adjustable (9 settings)</li>
<li>Earth-leakage sensitivity: 0.03…30 A</li>
<li>Earth-leakage time delay:</li>
<ul>
<li>Instantaneous for 0.03 A</li>
<li>Adjustable (9 settings) 0…4.5 s for 0.03…30 A</li>
</ul>
<li>Current sensors compatibility:</li>
<ul>
<li>VigiPacT TOA earth leakage current sensor</li>
<li>VigiPacT A earth leakage current sensor</li>
<li>VigiPacT L earth leakage current sensor</li>
</ul>
<li>[Ithe] conventional enclosed thermal current: 8 A</li>
<li>Minimum load: 10 mA at 12 V</li>
<li>[Us] rated supply voltage: 380...415 V AC 50/60 Hz (55...110%)</li>
<li>Power consumption in VA: 4 VA</li>
<li>Monitored distribution system:</li>
<ul>
<li>1000 V - AC at 50/60 Hz (maximum)</li>
<li>1000 V - AC at 400 Hz (maximum)</li>
</ul>
<li>Earthing system: TT, IT, TN-S</li>
<li>[Uimp] rated impulse withstand voltage: 8 kV</li>
<li>Reset: Manual reset</li>
</ul>
&nbsp;Complementary &nbsp;
<ul>
<li>Test function:</li>
<ul>
<li>Local</li>
<li>Remote test</li>
</ul>
<li>Monitoring:</li>
<ul>
<li>Electronics (continuous)</li>
<li>Power supply (continuous)</li>
<li>Relay/sensor link (continuous)</li>
</ul>
<li>Type of measurement: Earth fault current internal measurement, range: 80...100%</li>
<li>Tamperproof of settings: Protected by sealable cover</li>
<li>Connections - terminals:</li>
<ul>
<li>Auxiliary power supply: screw terminal cable(s) 0.2…2.5 mm² flexible AWG 24...AWG 12</li>
<li>Fault: screw terminal cable(s) 0.2…2.5 mm² flexible AWG 24...AWG 12</li>
<li>Relay test and fault reset: screw terminal cable(s) 0.14…1 mm² flexible AWG 26...AWG 16</li>
<li>Sensor: screw terminal cable(s) 0.14…1 mm² flexible AWG 26...AWG 16</li>
<li>Voltage presence: screw terminal cable(s) 0.2…2.5 mm² flexible AWG 24...AWG 12</li>
</ul>
<li>Wire stripping length:</li>
<ul>
<li>Auxiliary power supply: 7 mm for top connection</li>
<li>Fault: 8 mm for bottom connection</li>
<li>Relay test and fault reset: 5 mm for bottom connection</li>
<li>Sensor: 5 mm for top connection</li>
<li>Voltage presence: 8 mm for bottom connection</li>
</ul>
<li>Tightening torque:</li>
<ul>
<li>Auxiliary power supply: 0.6 N.m top</li>
<li>Fault: 0.6 N.m bottom</li>
<li>Relay test and fault reset: 0.25 N.m bottom</li>
<li>Sensor: 0.25 N.m top</li>
<li>Voltage presence: 0.6 N.m bottom</li>
</ul>
<li>9 mm pitches: 6</li>
<li>Standards:</li>
<ul>
<li>EN/IEC 60947-2 Annex M</li>
<li>EN/IEC 60755</li>
<li>UL 1053</li>
<li>CAN/CSA C22.2 No. 144</li>
</ul>
<li>Width: 54 mm</li>
<li>Height: 81 mm</li>
<li>Depth: 74 mm</li>
<li>Net weight: 0.3 kg</li>
<li>IP degree of protection:</li>
<ul>
<li>IP40 on front face: conforming to EN/IEC 60529</li>
<li>IP30 on side parts: conforming to EN/IEC 60529</li>
<li>IP20 on connection terminals: conforming to EN/IEC 60529</li>
</ul>
<li>IK degree of protection: IK07 conforming to EN 50102</li>
<li>Mechanical robustness:</li>
<ul>
<li>Fire resistance conforming to IEC 60695-2-1</li>
<li>IK protection 2 joules: IK07 conforming to EN 50102</li>
<li>Vibrations 13.2...100 Hz: 0.7 g</li>
<li>Vibrations 2...13.2 Hz: +/- 1 mm</li>
</ul>
</ul>
 Environment &nbsp;
<ul>
<li>Overvoltage category: IV</li>
<li>Electrical shock protection class: Class II</li>
<li>Electromagnetic compatibility:</li>
<ul>
<li>Conducted and radiated emissions: Class B, conforming to CISPR 11</li>
<li>Conducted radio-frequency immunity test: Level 3, conforming to IEC 61000-4-6</li>
<li>Electrostatic discharge immunity test: Level 4, conforming to IEC 61000-4-2</li>
<li>High-energy conducted susceptibility: Level 4, conforming to IEC 61000-4-5</li>
<li>Low-energy conducted susceptibility: Level 4, conforming to IEC 61000-4-4</li>
<li>Radiated susceptibility: Level 3, conforming to IEC 61000-4-3</li>
</ul>
<li>Relative humidity: 95% at 55°C</li>
<li>Pollution degree: 3 conforming to IEC 60664-1</li>
<li>Ambient air temperature for operation: -35…70°C</li>
<li>Ambient air temperature for storage: -55…85°C</li>
</ul>

schneider electric 56174 residual current protection relay, vigipact rh99m, 30ma-30a, 380/415vac 50/60hz, din rail mounting relai perlindungan arus residu, pemasangan rel monitoring relays pemantauan relay baki, geganti electric/施耐德电气 剩余电流保护继电器，vigipact rh99m，30ma-30a，380/415vac 50/60hz，din 导轨安装 监控继电器 施耐德电气