This compact PTC convection heater is for use in enclosures and casings. This enables you to achieve condensation prevention for effective operational safety of electrical systems and installations.
- Pressure terminal connection for quick electrical connection
- PTC heating element with dynamic response behavior
- This enclosure heater is designed for continuous operation
- Quick installation with clip fixing for 35 mm DIN rail
- Protection Class: I
- Protection Type: IP20
- Connection Case: Plastic to UL94 V-0, black
- Heating Element: PTC resistor (PTC)
- Heater Element: Aluminium profile, anodised
- AC/DC: AC; DC
- Operating Voltage: 120 V - 240 V
- Frequency: 50; 60 Hz
- Operating Temperature: -45 °C to 70 °C
- Operating Humidity: ≤90 % RH
- Storage Humidity: ≤90 % RH
- Storage Temperature: -45 °C to 70 °C
- Connection Type: Connection terminal
- Connection: 3 x pressure clamps for 0.5 - 1.5 mm² stranded wire (with wire end ferrule) and 0.5 - 2.5 mm² rigid wire
- Mounting: Clip for 35 mm DIN rail
- Installation Position: Airflow direction "in" vertical / connection at the bottom
- Width: 70 mm
- Depth: 60 mm
- Item Number Accessories 1: 09024.0-00
- Accessory 1: Screw fixing
- Note: Other voltages on request; When operating below AC/DC 140 V, the heating capacity is reduced by approx. 10%