Hot swap with ease by installing four SSDs/HDDs into one 5.25in bay

• Build your storage system by adding four 2.5in SAS or SATA drives into one 5.25in bay
• Supports a wide range of SSDs and HDDs from 5-15mm
• Easy, error free insertion of tray with vertically or horizontally mounted backplane
• Lockable, removable trays provide drive protection
• NSS connector provides 50,000+ insertion rating for long-lasting performance
• Interchangeable drive trays also work with the 1-bay backplane (SATSASBP125)
• High-quality metal housing provides enhanced heat dissipation
• Two 40mm fans to optimize ventilation
• Flammability rating of UL 94 V-O
• Support for SAS II and SATA I, II and III with file transfer speeds of up to 6Gbps
• Works with your RAID or HyperDuo controller

Connector(s)

Host Connectors
4 - SATA (7 pin, Data)
Drive Connectors
4 - SATA Data & Power Combo (7+15 pin)
Other Interface(s)
1 - LP4 (4 pin; Large Drive Power)

Environmental

Operating Temperature
0°C to 55°C (23°F to 95°F)
Storage Temperature
-20°C to 55°C (-4°F to 131°F)
Humidity
5%~65% RH

Hardware

Interface
SATA

SAS
Front Door Key Lock
Yes
Number of Drives
4
Drive Size
2.5in
Compatible Drive Types
SAS & SATA
Drive Installation
Removable
Number of 2.5 inch bays
4

Supported Drive Height(s)
5mm
9.5mm
12.5mm
15mm

Fan(s)
Yes
Fans
2 - 40 mm
Fan Bearing Type
Sleeve Bearing

Indicators

LED Indicators
4 - Drive power and activity LED

1 - Fan activity

Performance

Maximum Data Transfer Rate
6 Gbps
Type and Rate
SATA III (6 Gbps)
Port Multiplier
No
Max Drive Capacity
Tested with hard drives up to 2TB at 7200 RPM
Hot Swap Capability
Yes
Insertion Rating
50,000
Noise Level
20 dBA
MTBF
30,000

Software

OS Compatibility
OS independent; No software or drivers required

Special Notes / Requirements

Note
Flammability rating: UL94 - V0