Seppes SE-DJM-W5000 Stacking Speed Gate

SEPPES (Xilang) wind-resistant stacking fast door is suitable for the entrance and exit of logistics channels and large areas of openings, using folding lifting method and multiple built-in or external horizontal wind-resistant levers, so that the wind pressure can be evenly distributed on the entire door curtain, which can resist about 10 strong winds, and the wind resistance is much higher than that of conventional roller type fast roller shutter doors.

Wind resistant accumulation speed door

SEPPES wind-resistant stacking fast door is suitable for the entrance and exit of logistics channels and large areas of openings, using folding lifting method and multiple built-in or external horizontal wind-resistant levers, so that the wind pressure can be evenly distributed on the entire door curtain, which can resist about 10 strong winds, and the wind resistance is much higher than that of conventional roller-type fast roller shutter doors.

All measurements are taken indoors, and each value must be measured at least three points:

• H is the doorway height (the distance from the floor to the top of the doorway)
• B is the width of the door opening (the distance from the left edge of the door opening to the right edge)
• h is the distance above the door opening (from the top of the door opening to the ceiling) at least 900mm
• b1/b2 is the left/right lateral distance of at least 350mm (the distance from the corresponding edge of the door opening to the obstacle)
• When measuring H and B, take the maximum value as the final dimension
• When measuring h, b1 and I, take the minimum value as the final dimension.