Shopping List
Shopping List
SGD - S$
Image
/
/
/
/
Selleys Liquid Nail Mirror and Aluminum 9555086301196
Selleys Liquid Nail Mirror and Aluminum 9555086301196
Brand:
SELLEYS
Model:
9.55509E+12
Image
Image
Product Description

Selleys Liquid Nail Mirror and Aluminum 9555086301196

Selleys Liquid Nail Mirror & Aluminium 75g

A premium grade, high strength construction adhesive that has non-corrosive properties when being used on mirrors. Most other construction adhesives do not have this capability and will de-silver the mirror. Liquid Nail Mirror & Aluminum is heat and steam resistant which is important when fixing mirrors to walls in Bathrooms.

Ideal for: Mirror, Aluminium, Metal, Steel, Glass

Features:

  • Heat & steam resistant
  • High temperature & UV resistant
  • Will not discolour mirrors
  • Strong vertical hold
  • Non-corrosive
  • For interior & exterior use

Direction:

  • Ensure the surface is sound, dry, and free from oil, grease and dust.

Application for mirrors:

  • For mirrors up to 6mm thick, apply strips of adhesive approximately 8cm apart. Do not apply adhesive within 5cm of mirror edge.
  • Immediately after applying adhesive, place mirror against wall before adhesive skins (within 5 minutes).
  • When mirror is pressed onto the wall, strips of adhesive must not spread into, or touch one another. A gap must remain between them.
  • Hold in place with temporary supports (e.g. with clips or tape) to maintain adhesive contact over the total bond area until sufficient adhesive strength has developed (normally after 72 hours).
  • Do not seal around the edges of the mirror for at least a week to allow air circulation.
  • Mirrors should not be fixed directly to unpainted timber, plaster, concrete or brick walls. These surfaces should be painted to prevent potential damage to mirror.

General Application:

  • Painted surfaces should not be flaky or peeling. Freshly painted surfaces should be allowed to dry for at least 7 days, before job is done. Test for compatibility on painted surfaces, before using.
  • Not for permanent water immersion.
  • Not for rigid bonds (eg. broken glass).
  • Adhesive requires air to cure.
  • Clean up while wet with mineral turps.

Safety tips

  • On contact, uncured sealant can irritate eyes.
  • If in eyes, flood with water for at least 15 minutes and seek medical advice.
  • Avoid contact with skin. If contact occurs, wipe off immediately and wash with detergent. May irritate sensitive skin.
  • Avoid breathing vapours.
  • Ensure use in a well ventilated area, product releases methyl ethyl ketoxime while curing.
S$ 8.43
(exc. GST)
S$ 9.19
(inc. GST)
Image
Lead time of 5 working days required.
Item will be ready to dispatch within the lead time specified.
Quantity:
EA
Highly Matched Items
View items that have the same or are a close match to the specifications of this item
Coatings from SELLEYS
Source & compare similar products
More from Coatings
Expand your search with a wider selection
Recently Viewed Products
Compare & Refer to previously viewed items
Image
Top