Schneider Electric ATV610D11N4 Variable Speed Drive, Easy Altivar 610, 11kW, 15hp, 380 to 460V, IP20

Width

171 mm

Depth

236 mm

Mounting Mode

Wall Mount

Standard

UL 508C IEC 61800-3 IEC 61800-5-1 IEC 61000-3-12 IEC 60721-3 IEC 61508 IEC 13849-1

IP Degree of Protection

IP21

[Us] Rated Supply Voltage

380...480 V - 15...10 %

Network Number of Phases

3

Local Signalling

Local diagnostic: 3 LED (mono/dual colour) Embedded communication status: 5 LED (dual colour) Communication module status: 2 LED (dual colour) Presence of voltage: 1 LED (red)

Product or Component Type

Variable speed drive

Range of Product

Altivar Process ATV900

Device Application

Industrial application

Accuracy

+/- 0.6 % AI1, AI2, AI3 for a temperature variation 60 °C analog input +/- 1 % AQ1, AQ2 for a temperature variation 60 °C analog output

Network Frequency

50...60 Hz

Overvoltage Category

III

Pollution Degree

2

Relative Humidity

5…95 % without condensation conforming to IEC 60068-2-3

Ambient Air Temperature for Operation

-15…50 °C (without derating) 50…60 °C (with derating factor)

Ambient Air Temperature for Storage

-40…70 °C

Operating Altitude

<= 1000 m without derating 1000...4800 m with current derating 1 % per 100 m

Marking

CE

Environmental Characteristic

Chemical pollution resistance class 3C3 conforming to IEC 60721-3-3 Dust pollution resistance class 3S3 conforming to IEC 60721-3-3

Analog Input Type

AI1, AI2, AI3 software-configurable voltage: 0...10 V DC, impedance: 30 kOhm, resolution 12 bits AI1, AI2, AI3 software-configurable current: 0...20 mA/4...20 mA, impedance: 250 Ohm, resolution 12 bits

Electromagnetic Compatibility

Electrostatic discharge immunity test level 3 conforming to IEC 61000-4-2 Radiated radio-frequency electromagnetic field immunity test level 3 conforming to IEC 61000-4-3 Electrical fast transient/burst immunity test level 4 conforming to IEC 61000-4-4 1.2/50 µs - 8/20 µs surge immunity test level 3 conforming to IEC 61000-4-5 Conducted radio-frequency immunity test level 3 conforming to IEC 61000-4-6

Motor Power kW

7.5 kW for normal duty 5.5 kW for heavy duty

Minimum Switching Current

Relay output R1, R2, R3: 5 mA at 24 V DC

Insulation Resistance

> 1 MOhm 500 V DC for 1 minute to earth

Certifications

CSA UL TÜV

Operating Position

Vertical +/- 10 degree

Product Specific Application

Process for industrial

Shock Resistance

15 gn for 11 ms conforming to IEC 60068-2-27

Vibration Resistance

1.5 mm peak to peak (f= 2…13 Hz) conforming to IEC 60068-2-6 1 gn (f= 13…200 Hz) conforming to IEC 60068-2-6

Protection Type

Thermal protection: motor Safe torque off: motor Motor phase break: motor Thermal protection: drive Safe torque off: drive Overheating: drive Overcurrent between output phases and earth: drive Overload of output voltage: drive Short-circuit protection: drive Motor phase break: drive Overvoltages on the DC bus: drive Line supply overvoltage: drive Line supply undervoltage: drive Line supply phase loss: drive Overspeed: drive Break on the control circuit: drive

Connector Type

2 RJ45 1 RJ45

Product Destination

Asynchronous motors Synchronous motors

Discrete Input Number

10

Analogue Input Number

3

Assembly Style

Enclosed

Maximum Switching Current

Relay output R1 on resistive load, cos phi = 1: 3 A at 250 V AC Relay output R1 on resistive load, cos phi = 1: 3 A at 30 V DC Relay output R1 on inductive load, cos phi = 0.4 and L/R = 7 ms: 2 A at 250 V AC Relay output R1 on inductive load, cos phi = 0.4 and L/R = 7 ms: 2 A at 30 V DC Relay output R2, R3 on resistive load, cos phi = 1: 5 A at 250 V AC Relay output R2, R3 on resistive load, cos phi = 1: 5 A at 30 V DC Relay output R2, R3 on inductive load, cos phi = 0.4 and L/R = 7 ms: 2 A at 250 V AC Relay output R2, R3 on inductive load, cos phi = 0.4 and L/R = 7 ms: 2 A at 30 V DC

Switching Frequency

2...16 kHz adjustable 4...16 kHz with derating factor

Noise Level

56 dB

Electrical Connection

Control: screw terminal 0.5...1.5 mm²/AWG 20...AWG 16 Line side: screw terminal 4...6 mm²/AWG 12...AWG 10 Motor: screw terminal 6...10 mm²/AWG 10...AWG 8 DC bus: screw terminal 4...6 mm²/AWG 12...AWG 10

Discrete Input Logic

Positive logic (source) (DI1...DI8), < 5 V (state 0), > 11 V (state 1) Negative logic (sink) (DI1...DI8), > 16 V (state 0), < 10 V (state 1) Positive logic (source) (DI7, DI8), < 0.6 V (state 0), > 2.5 V (state 1) Positive logic (source) (STOA, STOB), < 5 V (state 0), > 11 V (state 1)

Discrete Output Number

2

Regulation Loop

Adjustable PID regulator

Supply

External supply for digital inputs: 24 V DC (19…30 V), <1.25 mA, protection type: overload and short-circuit protection Internal supply for reference potentiometer (1 to 10 kOhm): 10.5 V DC +/- 5 %, <10 mA, protection type: overload and short-circuit protection Internal supply for digital inputs and STO: 24 V DC (21…27 V), <200 mA, protection type: overload and short-circuit protection

Transmission Rate

10/100 Mbit/s for Ethernet IP/Modbus TCP 4.8, 9.6, 19.2, 38.4 kbit/s for Modbus serial

Maximum Output Frequency

599 Hz

Power Dissipation in W

Forced convection: 172 W at 380 V, switching frequency 4 kHz Natural convection: 44 W at 380 V, switching frequency 4 kHz

Physical Interface

Ethernet 2-wire RS 485

Input Compatibility

DI1...DI8: discrete input level 1 PLC conforming to IEC 61131-2 DI7, DI8: pulse input level 1 PLC conforming to IEC 65A-68 STOA, STOB: discrete input level 1 PLC conforming to IEC 61131-2

Analogue Output Number

2

Analogue Output Type

Software-configurable voltage AQ1, AQ2: 0...10 V DC impedance 470 Ohm, resolution 10 bits Software-configurable current AQ1, AQ2: 0...20 mA impedance 500 Ohm, resolution 10 bits

Sampling Duration

2 ms +/- 0.5 ms (DI1...DI8) - discrete input 5 ms +/- 1 ms (DI7, DI8) - pulse input 1 ms +/- 1 ms (AI1, AI2, AI3) - analog input 5 ms +/- 1 ms (AQ1, AQ2) - analog output

Continuous Output Current

16.5 A at 4 kHz for normal duty 12.7 A at 4 kHz for heavy duty

Line Current

13.8 A at 380 V (normal duty) 10.5 A at 380 V (heavy duty) 11.9 A at 480 V (normal duty) 9.2 A at 480 V (heavy duty)

EMC Filter

Integrated With EMC plate option

Method of Access

Slave Modbus TCP

Communication Port Protocol

EtherNet/IP Modbus TCP Modbus serial

Exchange Mode

Half duplex, full duplex, autonegotiation Ethernet IP/Modbus TCP

Variant

Standard version With braking chopper

Degree of Protection

UL type 1

Option Module

Slot A: communication module for Profibus DP V1 Slot A: communication module for PROFINET Slot A: communication module for DeviceNet Slot A: communication module for EtherCAT Slot A: communication module for CANopen daisy chain RJ45 Slot A: communication module for CANopen SUB-D 9 Slot A: communication module for CANopen screw terminals Slot A/slot B/slot C: digital and analog I/O extension module Slot A/slot B/slot C: output relay extension module Slot B: 5/12 V digital encoder interface module Slot B: analog encoder interface module Slot B: resolver encoder interface module communication module for Ethernet Powerlink

Asynchronous Motor Control Profile

Variable torque standard Constant torque standard Optimized torque mode

Synchronous Motor Control Profile

Permanent magnet motor Synchronous reluctance motor

Apparent Power

9.9 kVA at 480 V (normal duty) 7.6 kVA at 480 V (heavy duty)

Nominal Switching Frequency

4 kHz

Maximum Transient Current

19.8 A during 60 s (normal duty) 19.1 A during 60 s (heavy duty)

Prospective Line Isc

50 kA

Discrete Input Type

DI1...DI8 programmable, 24 V DC (<= 30 V), impedance: 3.5 kOhm DI7, DI8 programmable as pulse input: 0…30 kHz, 24 V DC (<= 30 V) STOA, STOB safe torque off, 24 V DC (<= 30 V), impedance: > 2.2 kOhm

Discrete Output Type

Logic output DQ+ 0…1 kHz <= 30 V DC 100 mA Programmable as pulse output DQ+ 0…30 kHz <= 30 V DC 20 mA Logic output DQ- 0…1 kHz <= 30 V DC 100 mA

Relay Output Number

3

Relay Output Type

Configurable relay logic R1: fault relay NO/NC electrical durability 100000 cycles Configurable relay logic R2: sequence relay NO electrical durability 1000000 cycles Configurable relay logic R3: sequence relay NO electrical durability 1000000 cycles

Transmission Frame

RTU

Number of Addresses

1…247 for Modbus serial

Data Format

8 bits, configurable odd, even or no parity for Modbus serial

Type of Polarization

No impedance for Modbus serial

4 Quadrant Operation Possible

True

Acceleration and Deceleration Ramps

Linear adjustable separately from 0.01...9999 s

Motor Slip Compensation

Can be suppressed Adjustable Not available in permanent magnet motor law Automatic whatever the load

Braking to Standstill

By DC injection

Brake Chopper Integrated

True

Maximum Input Current

13.8 A

Maximum Output Voltage

480 V

Relative Symmetric Network Frequency Tolerance

5 %

Base Load Current at High Overload

12.7 A

Base Load Current at Low Overload

16.5 A

With Safety Function Safely Limited Speed (SLS)

True

With Safety Function Safe Brake Management (SBC/SBT)

True

With Safety Function Safe Operating Stop (SOS)

False

With Safety function Safe Position (SP)

False

With Safety Function Safe Programmable Logic

False

With Safety Function Safe Speed Monitor (SSM)

False

With Safety Function Safe Stop 1 (SS1)

True

With sft fct Safe Stop 2 (SS2)

False

With Safety Function Safe Torque Off (STO)

True

With Safety Function Safely Limited Position (SLP)

False

With Safety Function Safe Direction (SDI)

False

Linearity Error

AI1, AI2, AI3: +/- 0.15 % of maximum value for analog input AQ1, AQ2: +/- 0.2 % for analog output

Refresh Time

Relay output (R1, R2, R3): 5 ms (+/- 0.5 ms)

Isolation

Between power and control terminals

Maximum THDI

<48 % from 80...100 % of load conforming to IEC 61000-3-12

Environmental Class (During Operation)

Class 3C3 according to IEC 60721-3-3 Class 3S3 according to IEC 60721-3-3

Maximum Acceleration Under Shock Impact (During Operation)

150 m/s² at 11 ms

Maximum Acceleration Under Vibrational Stress (During Operation)

10 m/s² at 13...200 Hz

Maximum Deflection Under Vibratory Load (During Operation)

1.5 mm at 2...13 Hz

Permitted Relative Humidity (During Operation)

Class 3K5 according to EN 60721-3

Volume of Cooling Air

103 m3/h

Ambient Air Transport Temperature

-40…70 °C

Brand:	SCHNEIDER ELECTRIC
Model:	ATV610D11N4