External Deburring Tool is perfect for removing burrs from the pipes or threaded rods and more. Quick application with multiple times usage, this tool allows for safe, inexpensive and efficient repairs!

Suitable for：

• Stainless-mildened & mild steel | brass | copper | aluminum | fiberglass | plastic and wood | and more
• External deburring tool 3 to 12mm | 3/33″ to 1/2″Inch
• External deburring tool 8 to 22mm (up to 26mm) or 5/16″ to 7/8″ Inch (up to 1″)

How To Use：

• Low speed recommended 500 Rpm’s
• Add more pressure on harder material’s
• Always use it in a clockwise direction

Important：

• Do not overspeed to avoid blades of overheating. This will be the result of the damage and will not cut as well. Always wear safety gloves, glasses and proper safety equipment
• SBV deburring tool is perfect for stainless steel, hardened steel, mild steel, copper & brass. Also can be used on wood, fiberglass & plastic and more. Conscientious design means no cuts on the outside, sparks, or burns if proper use. 1/4 “impact shaft for quick use. The head with deburring blades are made of HRC 60 and above extreme hard steel for long life and use on hardened steels
• Dimension: Ø 2.3cm x H 4.5cm (Ø 0.98″ x 1.77 H”)
• Dimension: Ø 4cm x H 6cm (Ø 1.57″ x 2.36 H”)

Specification:

• Material: HRC 60 and above extreme hard steel
• Size to use: 3 to 12mm or 3/33" to 1/2" Inch
• Size to use: 8 to 22mm (up to 26mm) or 5/16" to 7/8" Inch (up to 1")
• Weight: 17 gr, 0.04 lb
• Weight: 75 gram, 0.17 lb
• Dimension: Ø 2.3cm x H 4.5cm (Ø 0.98" x 1.77 H")
• Dimension: Ø 4cm x H 6cm (Ø 1.57" x 2.36 H")

*Images are for illustration purposes only