Pilz 570401 Safety switch

Safety switch, coded, for safety guard locking device PSENmlock, with guard locking, with power reset, 8-pin M12 male connector, 0.23mcable, single connection

Approval : CE, UKCA, cULus Listed, FCC, IC, TÜV

Sensor principle : Transponder

Coding level to ISO 14119 : Low

Classification to EN 60947-5-3 : PDDB

Transponder coding : Coded

Reset type : Power reset

Suitable for series connection : No

Unit type : Sensor

Supply voltage : 24 V

Type of supply voltage : DC

Power consumption DC : 1 W

Number of inputs : 2

DC voltage at input : 24 V DC

Number of OSSD outputs : 2

Number of signal outputs : 1

Potential isolation S/C O : No

S/C output short circuit proof : Yes

Utilisation category to EN 60947-1 : DC-13

Ambient temperature standard : EN 60068-2-14

Ambient temperature : 0 - 60 °C

Storage temperature standard : EN 60068-2-1/-2

Climatic suitability standard : EN 60068-2-78

Humidity rating : 93 % r.h. at 40 °C

EMC standards : EN 55011: Class A, EN 60947-5-3, EN 61326-3-1

Vibration to standard : EN 60068-2-6

Acceleration shock standard 1 : 30g

Overvoltage category : III

Pollution degree (clear & creep) : 3

Protection type, housing : IP65, IP67, IP69

UL enclosure type : Type 1

Pulse length lock/unlock required : 350 - 400 ms

Bend radius (when laying) : 5 x Ø

Escape release available : No

Type 1 actuator : PSEN ml 1.1

Connection type : M12, 8-pin male

Cable lines : LiYY 8 x 0.25 mm²

Product material : Zn, Aluminium, Galvanised steel, Stainless steel, Plastic

Height dimension : 217.2 mm

Width dimension : 40 mm

Depth dimension : 40 mm

Net weight : 950 g

Gross weight : 1300 g

Transponder operating frequency : 122 kHz - 128 kHz