Pilz 541353 RFiD safety switch 2 safe SC outputs

RFiD safety switch 2 safe SC outputs, 5-pin M12 male connector, one actuation direction, IP67, switching distance 11 mm, Sao = 8 mm, Sar= 20 mm, PU = 1 piece coded switch without actuator.

• Approval : CE, UKCA, cULus Listed, FCC, IC, EAC (Eurasian), TÜV
• Sensor principle : Transponder
• Coding level to ISO 14119 : Low
• Classification to EN 60947-5-3 : PDDB
• Transponder coding : coded
• Suitable for series connection : no
• Unit type : Sensor
• Supply voltage (V) : 24 V
• Type of supply voltage U1 : DC
• Power consumption DC : 1 W
• Number of OSSD outputs : 2
• Potential isolation S/C O : No
• S/C output short circuit proof : Yes
• Utilisation category to EN 60947-1 : DC-12
• Ambient temperature standard : EN 60068-2-14
• Ambient temperature : -25 – 55 °C
• Max. ambient temp. at 2000 m : +55 °C
• Storage temperature standard : EN 60068-2-1/-2
• Climatic suitability standard : EN 60068-2-78
• Humidity rating : 93% r.h. at 40°C
• Permitted operating height ASL : 4000 m
• EMC to standard : EN 60947-5-3
• Vibration to standard : EN 60947-5-2
• Shock resistance : 30g
• Overvoltage category : III
• Pollution degree (clearance & creepage) : 3
• Protection type (housing) : IP6K9K
• Change operating distance temp. change : ±0.01 mm/°C
• Bend radius (when laying) K1 : 5 × Ø
• Type 1 actuator : PSEN cs3.19
• Sensor can be flush-mounted : Yes, follow installation guide
• Connection type : M12, 5-pin male
• Cable lines : Li9Y11Y 8 × 0.14 mm²
• Housing material upper part : PBT
• Height dimension : 37 mm
• Width dimension : 26 mm
• Depth dimension : 18 mm
• Net weight : 40 g
• Gross weight : 60 g
• Operating frequency : 122 kHz – 128 kHz