Pilz 541159 RFiD safety switch 2 safe SC outputs

RFiD safety switch 2 safe SC outputs, 8-pin M12 male connector, with 0.15 m cable, series connection, support for SDD, IP67, switching distance depends on actuator, one actuating direction, PU = 1 piece fully coded switch without actuator. A total of 8 teach-in processes is possible.

Specifications:

Approval: CE, UKCA, cULus Listed, FCC, IC, EAC (Eurasian), TÜV

Sensor principle: Transponder

Coding level to ISO 14119: High

Classification to EN 60947-5-3: PDDB

Transponder coding: Fully coded

Suitable for series connection: Yes

Unit type: Sensor

Supply voltage: 24 V DC

Power consumption: 1 W

Number of inputs: 2

Input voltage: 24 V DC

Number of OSSD outputs: 2

Number of signal outputs: 1

Potential isolation S/C O: No

Short-circuit-proof output: Yes

Utilisation category (EN 60947-1): DC-12

Ambient temperature standard: EN 60068-2-14

Ambient temperature: –25 to +70 °C

Max. ambient temp. at Hmax: +60 °C

Max. ambient temp. at 2000 m: +70 °C

Storage temperature standard: EN 60068-2-1/-2

Climatic suitability: EN 60068-2-78

Humidity rating: 93% r.h. at 40 °C

Permissible operating height: 4000 m

EMC standard: EN 60947-5-3

Vibration standard: EN 60947-5-2

Shock resistance: 30 g

Overvoltage category: III

Pollution degree: 3

Protection type: IP6K9K

Change in operating distance due to temperature:

• Actuator 1: ±0.01 mm/°C

• Actuator 2: ±0.1 mm/°C

• Actuator 3: ±0.01 mm/°C

• Actuator 4: ±0.01 mm/°C

Bend radius (installation): 5 × Ø

Sensor flush-mountable: Yes (follow installation guide)

Connection type: M12, 8-pin male

Cable lines: Li9Y11Y, 8 × 0.14 mm²

Housing material (upper part): PBT

Height: 37 mm

Width: 26 mm

Depth: 18 mm

Gross weight: 64 g

Operating frequency: 122–128 kHz