Pilz 541064 RFiD safety switch 2 safe SC outputs

RFiD safety switch 2 safe SC outputs, 8-pin M12 male connector, with 1.5 m cable, one actuation direction, support for SDD, IP67 switching distance depends on the actuator, series connection, PU = 1piece coded switch with actuator.

Specifications:

• Approval: CE, UKCA, cULus Listed, FCC, IC, EAC (Eurasian), TÜV
  
• Sensor principle: Transponder
  
• Coding level to ISO 14119: Low
  
• Classification to EN 60947-5-3: PDDB
  
• Transponder coding: Coded
  
• Suitable for series connection: Yes
  
• Unit type: Sensor
  
• Supply voltage: 24 V
  
• Type of supply voltage (U1): DC
  
• Power consumption (DC): 1 W
  
• Number of inputs: 2
  
• DC voltage at input: 24 V DC
  
• Number of OSSD outputs: 2
  
• Number of signaling outputs: 1
  
• Potential isolation S/C O: No
  
• S/C output short circuit proof: Yes
  
• Utilisation category (EN 60947-1): DC-12
  
• Ambient temperature standard: EN 60068-2-14
  
• Ambient temperature: -25 to 70 °C
  
• Max. ambient temp. at Hmax: +60 °C
  
• Max. ambient temp. at 2000 m: +70 °C
  
• Storage temperature standard: EN 60068-2-1/-2
  
• Climatic suitability standard: EN 60068-2-78
  
• Humidity rating: 93% r.h. at 40 °C
  
• Permissible operating height (ASL): 4000 m
  
• EMC standard: EN 60947-5-3
  
• Vibration standard: EN 60947-5-2
  
• Shock resistance: 30g
  
• Overvoltage category: III
  
• Pollution degree (clear. & creep.): 3
  
• Protection type (housing): IP6K9K
  
• Change op. distance temp. act.1: ±0.01 mm/°C
  
• Change op. distance temp. act.2: ±0.1 mm/°C
  
• Change op. distance temp. act.3: ±0.01 mm/°C
  
• Change op. distance temp. act.4: ±0.01 mm/°C
  
• Bend radius (when laying) K1: 5 × Ø
  
• Sensor flush-mounted: Yes (follow installation guide)
  
• Connection type: M12, 8-pin male
  
• Cable type: Li9Y11Y, 8 × 0.14 mm²
  
• Housing material (upper part): PBT
  
• Height: 37 mm
  
• Width: 26 mm
  
• Depth: 18 mm
  
• Gross weight: 123 g
  
• Operating frequency: 122–128 kHz