Pilz 540005 Coded safety switch PSENcode

Coded safety switch PSENcode, with safety switch and actuator, ATEX certificate, 8‑pin M12 male connector, series connection, large design, incl. 1 pair CABLE/M12/CLIP to secure 1 M12 plug-in connector

Specifications

• Approval: CE, UKCA, cULus Listed, FCC, ATEX, electrosuisse, IC, EAC (Eurasian), ECOLAB, TÜV
  
• Sensor principle: Transponder
  
• Coding level to ISO 14119: Low
  
• Classification to EN 60947-5-3: PDDB
  
• Transponder coding: coded
  
• Suitable for series connection: yes
  
• Unit type: Unit
  
• Supply voltage (V): 24 V
  
• Type of supply voltage U1: DC
  
• Power consumption DC: 2 W
  
• Number of inputs: 2
  
• DC voltage at input: 24 V DC
  
• Number of OSSD outputs: 2
  
• Number of sig. outputs: 1
  
• Potential isolation S/C O: No
  
• S/C output short circuit proof: Yes
  
• Utilisation cat. to EN 60947-1: DC-12
  
• ATEX certificate number: SEV 12 ATEX 0122 X
  
• ATEX category gas: II 3G Ex ec mc IIC 90°C(T5) Gc
  
• ATEX category dust: II 3D Ex mc tc IIIC T90°C Dc
  
• ATEX application area X: -25°C ≤ ta ≤ +40°C
  
• Ambient temperature standard: EN 60068-2-14
  
• Ambient temperature: -25 - 40 °C
  
• Max. ambient temp. at Hmax: +40 °C
  
• Max. ambient temp. at 2000 m: +40 °C
  
• Storage temperature standard: EN 60068-2-1/-2
  
• Climatic suitability standard: EN 60068-2-78
  
• Humidity rating: 93% r. h. at 40 °C
  
• Perm. operating height ASL: 4000 m
  
• EMC to standard: EN 60947-5-3
  
• Vibration to standard: EN 60947-5-2
  
• Acc. shock to standard1: 30g
  
• Overvoltage category: III
  
• Pollution degree clear.&creep.: 3
  
• Protection type, housing: IP67
  
• Change op. dist. temp.change: ±0.01mm/°C
  
• Type 1 actuator: PSEN cs1.1
  
• Sensor can be flush-mounted: Yes, follow installation guide
  
• Connection type: M12, 8-pin male
  
• Housing material upper part: PBT
  
• Height dimension: 75 mm
  
• Width dimension: 40 mm
  
• Depth dimension: 40 mm