ORICO Dual Bay 2.5" 3.5" USB 3.0 to SATA Hard Drive Docking Station with Offline Duplicator and Clone Function UASP Protocol and 2 x 12TB
* Item: ORICO USB 3.0 to SATA Dual Slot External Docking Station for HDD 2.5 & 3.5 HDD/SSD HDD Duplicator/Clone Function [Support 16TB*2] * Material: ABS Plastic * Size: 132x117, 5x65mm * HDD Support: 2.5 & 3.5 inch SATA HDD/SSD
*External interface: SuperSpeed USB3.0
*Internal interface: SATA3.0
*Data cable: USB3.0 Cable 3.3ft/1m
*Pros: Free Tools/Hot Swap/No Drive/Offline Clone/Smart Sleep
* Support system: Windows 11 /10 / 8 / 7 / Vista / XP or Mac OS 9.1 and above
Note: HDD not included
* SuperSpeed USB3.0, transfer rate up to 5Gbps, backward compatible with USB2.0/1.1.
* Compatible with 2.5" and 3.5" SATA hard drives.
* Tool-free: Easily install and remove SATA hard drives without tools or screws.
*Includes 12V High Power AC Adapter.
* Built-in power management switch.
* Compatible with plug and play and hot swap, no need to install drivers.
* Available for Windows, Mac and Linux.
Please note Stand-alone clone function
---- Make sure the USB cable is disconnected from the computer.
1. Insert one hard disk into the source bay and another hard disk into the target bay (the capacity of the target disk must be equal to or greater than that of the source disk).
2. Press the PC/CLONE switch on the back of the hard drive to the clone side.
3. Plug in the power supply and press the power switch.
4. Then press the start button on the rear panel.
5. The blue LED will blink at 20% to indicate the start of the cloning process.
6. When all lights turn solid blue (20%-100%), the cloning process is complete.
7. Finally press the power switch and remove the disc.
notes:
1. Before cloning, copy the files to the target hard drive. When performing offline cloning, all files on the target hard disk will be overwritten. If the data on the target hard disk is still in use, please use your computer to back it up first.
2. To avoid loss of data, do not remove or insert a hard drive while a drive is in operation in the dock.
3. Make sure the USB cable is disconnected when using the offline clone function
Box contains:
1 x ORICO 2 Bays USB3.0 HDD Docking Station
1 x 12V3A AC power adapter
1 x USB3.0 data cable
1 x User Manual
1 x service card
Note:
1. Delivery can be expedited with additional freight cost
2. Stock availability/ Actual order lead time will be rechecked once confirm order
3. We do not accept returns or exchanges due to Indent item unless product quality issue
4. Picture shown is for illustration purposes only, actual product may differ
5. This image is representative of the product range, actual product may differ
6. Product may vary slightly from image representation
