Molykote

Super Lube

润滑 & 脱脂

Lubricants & Degreasers

lubricants & degreasers

Pelumas & Degreaser

Pelincir & Penyahgris

น้ำมันหล่อลื่นและน้ำยาขจัดคราบน้ำมัน

lubricants-degreasers

Super Lube Silicone Heat Sink Compound - 98003

Super Lube® Silicone Heat Sink Compound is a non-curing silicone paste, blended with thermally conductive, fine metal oxide powders. It will not harden, dry out or melt, and aids in the efficient transfer of heat away from electronics and electrical components.

Super Lube® Silicone Heat Sink Compound can be used in temperatures from -40°F to 500°F (-40°C to 260°C).

Super Lube 98003Super Lube Silicone Heat Sink Compound - 98003Package Weight : 3 oz / 85gSuper Lube® Silicone Heat Sink Compound is a non-curing silicone paste, blended with thermally conductive, fine metal oxide powders. It will not harden, dry out or melt, and aids in the efficient transfer of heat away from electronics and electrical components.Super Lube® Silicone Heat Sink Compound can be used in temperatures from -40°F to 500°F (-40°C to 260°C).

Super Lube 98003
Super Lube Silicone Heat Sink Compound - 98003
Package Weight : 3 oz / 85g
Super Lube® Silicone Heat Sink Compound is a non-curing silicone paste, blended with thermally conductive, fine metal oxide powders. It will not harden, dry out or melt, and aids in the efficient transfer of heat away from electronics and electrical components.
Super Lube® Silicone Heat Sink Compound can be used in temperatures from -40°F to 500°F (-40°C to 260°C).

Ian Ong

ELORA

WEICON

LOCTITE

METABO

Permatex

Others

Fujiplus

DEVCON

Adhesive Glue

Sealants

Lubricants

Threadlocker

Degreasers

Anti Rust Coating & Lubricant

Socket Accessories

Epoxy

Grease

Other Tools

Sharon/Joey

buyerIntroduction

super lube silicone heat sink compound 98003 senyawa pendingin silikon anti-seize compounds sebatian lube/超级润滑油 硅胶散热片-98003 超级润滑油

super-lube-silicone-heat-sink-compound-98003

Dow Corning / Molykote 4 is a moisture-proof seal for aircraft, automotive, and marine ignition systems and spark plug connections, disconnection junctions in electrical wiring systems also in electrical assemblies and terminals. Used as a seal and lubricant for cable connectors, battery terminals, rubber door seals, switches, and rubber and plastic O-rings and as an assembly lubricant for various metal-on-plastic and metal-on-rubber combinations.

Grease-like material containing an inert silica filler in combination with selected polydimethyl silicone fluids.

Dow Corning / Molykote 4Features & benefits
• High dielectric strength
• Low volatility
• Moisture-resistant
• Good thermal oxidation and chemical stability
• Meets requirements of SAE AS 8660
• Certification to NSF 51 and 61
• Meets requirements of FDA 21 CFR 175.300
• Retains its greaselike consistency from -40°C ( -40°F) to +200°C (392°F)
• Odorless
• Highly water-repellent
• Adheres readily to dry metals, ceramics, rubber, plastics and insulating resins

How to use
Dow Corning / Molykote 4 Electrical Insulating Compound can be applied by hand, specially designed automated equipment, brushing or wiping. Certain designs of grease guns may seize up with silicone compounds; test prior to use.

A thinner consistency can be achieved by dispersing in solvents such as xylene, mineral spirits and methyl ethyl ketone. Dow Corning / Molykote 4 Electrical Insulating Compound can then be applied by brushing, dipping or spraying.  Dow Corning / Molykote 4 Electrical Insulating Compound should not be applied to any surface that will be painted or finished. Such coatings may not adhere to the silicone-treated surface.

If contaminated by a silicone coating, parts can be wiped or washed with solvent, washed with detergent, or immersed in an alcoholic potassium hydroxide solution and then rinsed in clear water before painting. 

Dispensing
Separation and compaction can occur with some high-pressure dispensing equipment. This should be considered when designing dispensing systems for use with Dow Corning / Molykote 4  Electrical Insulating Compound.

Dow Corning / Molykote 4 is a moisture-proof seal for aircraft, automotive, and marine ignition systems and spark plug connections, disconnection junctions in electrical wiring systems also in electrical assemblies and terminals. Used as a seal and lubricant for cable connectors, battery terminals, rubber door seals, switches, and rubber and plastic O-rings and as an assembly lubricant for various metal-on-plastic and metal-on-rubber combinations.Grease-like material containing an inert silica filler in combination with selected polydimethyl silicone fluids.Dow Corning / Molykote 4Features &amp; benefits • High dielectric strength • Low volatility • Moisture-resistant • Good thermal oxidation and chemical stability • Meets requirements of SAE AS 8660 • Certification to NSF 51 and 61 • Meets requirements of FDA 21 CFR 175.300 • Retains its greaselike consistency from -40°C ( -40°F) to +200°C (392°F) • Odorless • Highly water-repellent • Adheres readily to dry metals, ceramics, rubber, plastics and insulating resinsHow to use Dow Corning / Molykote 4 Electrical Insulating Compound can be applied by hand, specially designed automated equipment, brushing or wiping. Certain designs of grease guns may seize up with silicone compounds; test prior to use.A thinner consistency can be achieved by dispersing in solvents such as xylene, mineral spirits and methyl ethyl ketone. Dow Corning / Molykote 4 Electrical Insulating Compound can then be applied by brushing, dipping or spraying. Dow Corning / Molykote 4 Electrical Insulating Compound should not be applied to any surface that will be painted or finished. Such coatings may not adhere to the silicone-treated surface.If contaminated by a silicone coating, parts can be wiped or washed with solvent, washed with detergent, or immersed in an alcoholic potassium hydroxide solution and then rinsed in clear water before painting. Dispensing Separation and compaction can occur with some high-pressure dispensing equipment. This should be considered when designing dispensing systems for use with Dow Corning / Molykote 4 Electrical Insulating Compound.

Dow Corning / Molykote 4 is a moisture-proof seal for aircraft, automotive, and marine ignition systems and spark plug connections, disconnection junctions in electrical wiring systems also in electrical assemblies and terminals. Used as a seal and lubricant for cable connectors, battery terminals, rubber door seals, switches, and rubber and plastic O-rings and as an assembly lubricant for various metal-on-plastic and metal-on-rubber combinations.
Grease-like material containing an inert silica filler in combination with selected polydimethyl silicone fluids.
Dow Corning / Molykote 4Features &amp; benefits 
• High dielectric strength 
• Low volatility 
• Moisture-resistant 
• Good thermal oxidation and chemical stability 
• Meets requirements of SAE AS 8660 
• Certification to NSF 51 and 61 
• Meets requirements of FDA 21 CFR 175.300 
• Retains its greaselike consistency from -40°C ( -40°F) to +200°C (392°F) 
• Odorless 
• Highly water-repellent 
• Adheres readily to dry metals, ceramics, rubber, plastics and insulating resins
How to use 
Dow Corning / Molykote 4 Electrical Insulating Compound can be applied by hand, specially designed automated equipment, brushing or wiping. Certain designs of grease guns may seize up with silicone compounds; test prior to use.
A thinner consistency can be achieved by dispersing in solvents such as xylene, mineral spirits and methyl ethyl ketone. Dow Corning / Molykote 4 Electrical Insulating Compound can then be applied by brushing, dipping or spraying. Dow Corning / Molykote 4 Electrical Insulating Compound should not be applied to any surface that will be painted or finished. Such coatings may not adhere to the silicone-treated surface.
If contaminated by a silicone coating, parts can be wiped or washed with solvent, washed with detergent, or immersed in an alcoholic potassium hydroxide solution and then rinsed in clear water before painting. 
Dispensing 
Separation and compaction can occur with some high-pressure dispensing equipment. This should be considered when designing dispensing systems for use with Dow Corning / Molykote 4 Electrical Insulating Compound.

PERMATEX

WD40

Hong Teck Hin Hardware

Dow Corning / Molykote 4 Electrical Insulating Compound 150G

dow corning molykote electrical insulating compound 150g senyawa isolasi listrik corning/molykote anti-seize compounds sebatian penebat elektrik 道康宁/ molykote/莫利科特 电气绝缘化合物 莫利科特